Influence of nanotopography on phospholipid bilayer formation on silicon dioxide

We have investigated the effect of well-defined nanoscale topography on the 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) lipid vesicle adsorption and supported phospholipid bilayer (SPB) formation on SiO2 surfaces using a quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM). Unilamellar lipid vesicles with two different sizes, 30 and 100 nm, were adsorbed on pitted surfaces with two different pit diameters, 110 and 190 nm, as produced by colloidal lithography, and the behavior was compared to results obtained on flat surfaces. In all cases, complete bilayer formation was observed after a critical coverage of adsorbed vesicles had been reached. However, the kinetics of the vesicle-to-bilayer transformation, including the critical coverage, was significantly altered by surface topography for both vesicle sizes. Surface topography hampered the overall bilayer formation kinetics for the smaller vesicles, but promoted SPB formation for the larger vesicles. Depending on vesicle size, we propose two modifications of the precursor-mediated vesicle-to-bilayer transformation mechanism used to describe supported lipid bilayer formation on the corresponding flat surface. Our results may have important implications for various lipid-membrane-based applications using rough or topographically structured surfaces.     

Paper‐Origami‐Based Multiplexed Malaria Diagnostics from Whole Blood

We demonstrate, for the first time, the multiplexed determination of microbial species from whole blood using the paper‐folding technique of origami to enable the sequential steps of DNA extraction, loop‐mediated isothermal amplification (LAMP), and array‐based fluorescence detection. A low‐cost handheld flashlight reveals the presence of the final DNA amplicon to the naked eye, providing a “sample‐to‐answer” diagnosis from a finger‐prick volume of human blood, within 45 min, with minimal user intervention. To demonstrate the method, we showed the identification of three species of Plasmodium, analyzing 80 patient samples benchmarked against the gold‐standard polymerase chain reaction (PCR) assay in an operator‐blinded study. We also show that the test retains its diagnostic accuracy when using stored or fixed reference samples.     

Insight into the nonlinear absorbance of two related series of two-photon absorbing chromophores

A comprehensive photophysical study of the linear and nonlinear absorption properties has been carried out on two series of two-photon absorbing dyes to gain insight into how structure-property relationships influence observed nonlinear absorption. The materials studied consist of an electron accepting benzothiazole group connected to an electron donating diphenylamine via a fluorene bridging group. Two series differ from each other by the addition of one phenyl group and for each series one-arm (dipolar, AF240 and AF270), two-arm (quadrupolar, AF287 and AF295), and three-arm (octupolar, AF350 and AF380) versions were studied. Overall the AF240 series exhibits higher intrinsic two-photon absorption (TPA) cross-sections than the AF270 series as well as enhanced nanosecond nonlinear absorption, with an increase with number of branches. The enhanced nanosecond nonlinearity is understood by taking into account the contribution from the singlet and triplet excited states and was verified by a two-photon assisted excited-state absorption model that satisfactorily predicts the nonlinear absorption of the chromophores.     

Platinum-group element concentrations in BCR-723: a quantitative review of published analyses

BCR-723 is the only environmental certified reference material for platinum-group elements (PGEs) Pt, Pd and Rh. It has been an integral component of quality control/quality assurance procedures in environmental laboratories measuring PGEs, since 2001. Here, we present an extensive quantitative review of the published PGEs measured in BCR-723, since its introduction. A statistical examination of concentrations, measurement precision and accuracy for 25 studies is presented. Measurement typically starts with an aqua regia digestion, followed by some form of pre-concentration or separation procedure, and quantitation by ICP-MS. Use of a sample mass below the recommended value of 100 mg has been shown to produce biased results for acid-based digestions or with laser ablation. Platinum is the most precisely and accurately measured PGE in BCR-723, followed by Rh, and finally by Pd. Literature precision data for all autocatalyst PGEs did not differ significantly (α = 0.05) from those obtained by the original laboratories used to certify BCR-723. Measurement accuracies for the literature tabulated PGE data did not differ significantly from zero, indicating an overall lack of directional bias. These results should be encouraging to the analytical community, but further advancements, especially for Pd quantification are required.     

Determination of ultra trace levels of 1,2-dichloroethane in air by sample enrichment micromachined gas chromatography-differential mobility detection

A novel analytical procedure has been developed for the analysis of ultra trace levels of 1,2-dichloroethane (EDC) in air using sample enrichment in combination with micromachined gas chromatography (GC) and differential mobility detection (DMD). When compared to other contemporary GC techniques, such as GC-flame ionization detection, GC-electron capture detection, or GC-electrolytic conductivity detection, the employment of a DMD in combination with a preconcentrator provided better sensitivity and markedly improved selectivity. The increase in sensitivity reduces false-negative results, while the improvement in selectivity decreases the potential for false-positive results. Using the technique described, a complete analysis can be conducted in less than 10 min, with a detection limit of 0.7 ppb (v/v) of EDC and a short term precision of less than 6%. A correlation coefficient of 0.9988 was obtained over an EDC concentration range from 0.7 ppb to 36.4 ppb (v/v). The analytical system also has an on-board microTCD in series with the DMD, allowing both detector outputs to be monitored simultaneously. With the pre-concentration technique, the microTCD can detect EDC as low as 15 ppb (v/v) with a substantially enhanced linear dynamic range in addition to providing a confirmation means for the presence of EDC at the level cited.     

Spiral coils for counter-current chromatography using aqueous polymer two-phase systems

Retention properties of polyethylene glycol-phosphate aqueous two-phase systems in a spiral coil (5 mm I.D.) on Type-J synchronous counter-current chromatographic devices have been compared for the elution mode where the lower phase is the mobile phase and flows from the inside head terminal. This was achieved with the aid of digital imaging under stroboscopic illumination, an image analysis and measurement of the displaced volume of the stationary phase. For the spiral coil, high and stable stationary phase retention at mobile phase flow rates up to 64 ml/min has been obtained. Wave-like disturbance of the interface near the proximal point was observed and analyses have been made for possible use in protein separation.     

Counter-current chromatography separation scaled up from an analytical column to a production column

An analytical separation was performed on an analytical J-type counter-current chromatography (CCC) instrument using a 5.4 ml column, with a 1 ml/min mobile phase flow rate. This separation had a resolution of 0.69 and was achieved in 10 min. The same separation was performed using two 2300 ml columns connected in series at a flow rate of 850 ml/min using a production scale J-type centrifuge. This production scale separation was also obtained in 10 min with a resolution of 0.71. This represents an 850 times increase in productivity. This paper presents these separations and the underlying scale up theory.     

Derivatisation using m-(trifluoromethyl)phenyltrimethylammonium hydroxide of organic materials in artworks for analysis by gas chromatography-mass spectrometry: unusual reaction products with alcohols

The quaternary ammonium reagent m-(trifluoromethyl)phenyltrimethylammonium hydroxide (TMTFTH) has gained widespread use for the derivatisation for GCMS analysis of organic materials found in artists' materials, such as oils, plant resins and waxes. This paper discusses products formed from reactions of TMTFTH with alcohols--including fatty alcohols, hydroxyacids, terpenes and glycerol--that have diagnostic value in the analysis of samples from artworks. In addition to methyl ethers, (trifluoromethyl)phenyl ethers were formed to variable degrees from the different types of alcohol. The products were identified from their EI mass spectra. An understanding of these multiple reaction products is important for the interpretation of GCMS data from complex samples, especially in the case of polyfunctional alcohols such as glycerol, which forms a number of methyl, (trifluoromethyl)phenyl and mixed ethers. The significance of the reaction products, and the relative advantages of TMTFTH as compared to alternative ammonium and sulfonium methylating reagents, are discussed.     

Study of electron transfer in ferrocene-labeled collagen-like peptides

This study describes the electron transfer (ET) phenomenon through a series of (Pro-Hyp-Gly) repeat units containing collagen mimics. The peptides contain redox-active ferrocene (Fc) and thiol-functionalized cystein (Cys) at the N- and C-terminals, respectively. Peptide films were prepared on gold surfaces and characterized by X-ray photoelectron spectroscopy (XPS), ellipsometry, and Fourier transform-reflection absorption infrared spectroscopy (FT-RAIRS). Electrochemical investigations of the films showed a linear but weakly distance-dependent ET. The importance of H-bonding was realized, and the possibility of a conformationally gated ET mechanism has been discussed.     

Advantages of a small-volume counter-current chromatography column

Counter-current chromatography (CCC) works with a support-free liquid stationary phase. This allows for preparative separations and purifications. However, there are serious technical constraints because of the need to keep a liquid stationary phase in a column. Centrifugal fields are used. A new commercial hydrodynamic 18 mL column made with a narrow-bore 0.8 mm Teflon tubing was evaluated by comparing it with older hydrodynamic CCC columns and a similar 19 mL column but made with 1.6 mm Teflon tubing. A small-volume CCC column allows for reliable and fast solute partition coefficient determination. When resolution is required, both high efficiency and liquid stationary phase retention are needed. Unfortunately, these two requirements bear technical contradictions. A column coiled with a narrow tubing bore will provide a high chromatographic efficiency while a column containing wider tubing bore will achieve higher stationary phase retention. In all cases, increasing the magnitude of the centrifugal field also increases the stationary phase retention. The solution is to build centrifuges able to produce high fields that will provide acceptable liquid phase retention with narrow-bore tubes. The new 18 mL 0.8 mm tubing bore column is able to rotate as fast as 2100 rpm generating a 240 × g field. The two older CCC columns cannot compete with the new one. However, the small 19 mL column with 1.6 mm bore tubing can be useful when fast results are desired without top resolution.