Impact of growth temperature on the crystal habits,forms and structures of VO<Subscript>2</Subscript> nanocrystals

We investigated the impact of the process temperature on the habits, forms and crystal structure of VO₂ nanocrystals grown by a vapor-transport method on (0001) quartz substrates. Four distinct growth regimes were discerned: orthorhombic nanowires, sheets, hemispheres, and nanowires with a monoclinic structure. The nanostructures were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and transmission electron microscopy (TEM). I/V characterization of individual nanowires was enabled by Ti/Au contact formation via electron beam lithography and lift-off techniques. The expected metal–insulator transition (MIT) was found in monoclinic VO₂ nanowires.     

An improved liquid chromatographic method for the analysis of tylosin and its impurities

A selective reversed-phase (RP) liquid chromatographic (LC) method coupled with UV for the determination of tylosin and its related substances is described. The gradient method uses a Capcell pak C18 ACR column (25 cm×4.6 mm id, 5 μm) maintained at a temperature of 60°C. The mobile phases consist of acetonitrile, phosphate buffer pH 5.5 and water: (A; 27.5:10:62.5 v/v/v) and (B; 50:10:40 v/v/v). The flow rate is 1.0 mL/min and UV detection is performed at 280 nm. It allows the separation of all known and 22 other unknown related substances (≥0.02%) from the main compound and from one another. The method shows good precision, sensitivity, linearity (between 0.2 μg/mL and 1.25 mg/mL) and robustness. The limit of quantification is 0.2 μg/mL, corresponding to 0.020%. Seven bulk tylosin samples containing a large number of impurities were examined using this method.     

Development and validation of a chiral capillary electrophoresis method for assay and enantiomeric purity control of pramipexole

A rapid method for the enantioseparation of pramipexole and its R‐enantiomer has been developed by capillary electrophoresis. The influence of chemical and instrumental parameters was investigated including the type and concentration of chiral selectors, buffer composition and pH, co‐ions, applied voltage, capillary length and temperature. Optimal separation conditions were obtained using a 50 mM phosphate buffer (pH 2.8) containing 25 mM carboxymethyl‐β‐cyclodextrin on a fused‐silica capillary. Online UV detection was performed at 262 nm. A voltage of 25 kV was applied, and the capillary temperature was kept at 25°C. Hydrodynamic injection was performed at 3.45 kPa for 5.0 s. The separation of enantiomers was achieved in <6.5 min. The method was further validated in terms of stability of solutions, selectivity, linearity (both pramipexole and R‐enantiomer, R²>0.995), LOD and LOQ (0.91 and 2.94 μg/mL, respectively), repeatability (RSD<1.5%) and accuracy (pramipexole, 100.4%; R‐enantiomer, 100.5%). The proposed method was then applied to two kinds of pramipexole dihydrochloride monohydrate commercially available tablets, immediate release tablets (1.50 and 0.125 mg) and sustained release tablets (0.52 mg), to quantify the main component in the tablets. The amount of distomer could be quantified in bulk sample materials.     

Combining optical trapping, fluorescence microscopy and micro-fluidics for single molecule studies of DNA-protein interactions

Complexity and heterogeneity are common denominators of the many molecular events taking place inside the cell. Single-molecule techniques are important tools to quantify the actions of biomolecules. Heterogeneous interactions between multiple proteins, however, are difficult to study with these technologies. One solution is to integrate optical trapping with micro-fluidics and single-molecule fluorescence microscopy. This combination opens the possibility to study heterogeneous/complex protein interactions with unprecedented levels of precision and control. It is particularly powerful for the study of DNA-protein interactions as it allows manipulating the DNA while at the same time, individual proteins binding to it can be visualized. In this work, we aim to illustrate several published and unpublished key results employing the combination of fluorescence microscopy and optical tweezers. Examples are recent studies of the structural properties of DNA and DNA-protein complexes, the molecular mechanisms of nucleo-protein filament assembly on DNA and the motion of DNA-bound proteins. In addition, we present new results demonstrating that single, fluorescently labeled proteins bound to individual, optically trapped DNA molecules can already be tracked with localization accuracy in the sub-10 nm range at tensions above 1 pN. These experiments by us and others demonstrate the enormous potential of this combination of single-molecule techniques for the investigation of complex DNA-protein interactions.     

How many amorphous ices are there?

Many acronyms are used in the literature for describing different kinds of amorphous ice, mainly because many different preparation routes and many different sample histories need to be distinguished. We here introduce these amorphous ices and discuss the question of how many of these forms are of relevance in the context of polyamorphism. We employ the criterion of reversible transitions between amorphous "states" in finite intervals of pressure and temperature to discriminate between independent metastable amorphous "states" and between "substates" of the same amorphous "state". We argue that the experimental evidence suggests we should consider there to be three polyamorphic "states" of ice, namely low-(LDA), high-(HDA) and very high-density amorphous ice (VHDA). In addition to the realization of reversible transitions between them, they differ in terms of their properties, e.g., compressibility, or number of "interstitial" water molecules. Thus they cannot be regarded as structurally relaxed variants of each other and so we suggest considering them as three distinct megabasins in an energy landscape visualization.     

Development of a CD‐MEKC method for investigating the metabolism of tamoxifen by flavin‐containing monooxygenases and the inhibitory effects of methimazole,nicotine and DMXAA

A selective and low‐cost CD‐MEKC method under acidic conditions was developed for investigating the N‐oxygenation of tamoxifen (TAM) by flavin‐containing monooxygenases (FMOs). The inhibitory effects of methimazole (MMI), nicotine and 5,6‐dimethylxanthenone‐4‐acetic acid (DMXAA) on the given FMO reaction were also evaluated; 100 mM phosphate buffer (pH 8.6) was used for performing the enzymatic reaction and the separation of TAM and its metabolite tamoxifen N‐oxide (TNO) was obtained with a BGE consisting of 100 mM phosphoric acid solution adjusted to pH 2.5 with triethanolamine containing 50 mM sodium taurodeoxycholate, 20 mM carboxymethyl β‐CD and 20% ACN. The proposed method was applied for the kinetics study of FMO1 using TAM as a substrate probe. A Michaelis–Menten constant (K_m) of 164.1 μM was estimated from the corrected peak area of the product, TNO. The calculated value of the maximum reaction velocity (V_max) was 3.61 μmol/min/μmol FMO1; 50% inhibitory concentration and inhibition constant (K_i) of MMI, the most common alternate substrate FMO inhibitor, were evaluated and the inhibitory effects of two other important FMO substrates, nicotine and DMXAA, a novel anti‐tumour agent, were investigated.     

ON THE ADSORPTION OF HYDROPHOBIC POLLUTANTS ON SURFACTANT/CLAY COMPLEXES: COMPARISON OF THE INFLUENCE OF A CATIONIC AND A NONIONIC SURFACTANT

The adsorption of the cationic surfactant dodecyl trimethyl ammonium bromide (DTAB) and of the nonionic surfactant dodecyl octaethylene glycol ether (C₁₂E₈) on four different layer silicates and their influence on the sorption processes of the fungizide biphenyl were studied. Unexpectedly, no great differences were found in comparing the adsorption of the two surfactants on the basis of physicochemical investigations, although the adsorption mechanism up to monolayer formation is fundamentally different (ion exchange and physisorption). Thus, the plateau values of the adsorption isotherms and the molar enthalpies of displacement Δ ₂₁h are of the same order of magnitude for both surfactants and the same basal spacing by intercalation is observed in the case of swelling clays. The isotherms of the hydrophobic contaminant biphenyl are of the linear Cl-type at all layer silicates and very low adsorption takes place approximately proportionally to the BET (N₂) surface area. If the surface is weakly hydrophobized by surfactants (c_surfactant<< critical;micelle concentration (CMC)), biphenyl adsorption is clearly increased. These processes can be adequately described using the distribution coefficients K and K_OC (Henry coefficient related to the organic carbon content). K_OC is hardly influenced by the type of layer silicate for DTA⁺-layer silicates, whereas the C₁₂E₈ layer silicate complexes generally show higher, but also different K_OC values. If the surfactant concentrations are above the CMC, solubilization and adsorption compete for the pollutant molecules, which leads to a significant decrease in biphenyl adsorption.     

Determination of cholesterol and triglycerides in serum lipoproteins using flow field-flow fractionation coupled to gas chromatography-mass spectrometry

Asymmetric flow field flow fractionation (AsFlFFF) was combined with pyrolysis-gas chromatography mass spectrometry for a sized based fractionation and a detailed compositional study of the triglycerides and cholesterol associated with the various lipoprotein subclasses present in human serum. Serum samples were injected in the AsFlFFF instrument and fractionated with a time-delayed exponential decay cross flow program. The fractions collected after AsFlFFF elution were injected into a programmable temperature vaporizer (PTV) GC-injector, containing a fritted liner. A temperature and split-flow program for the PTV injector was optimized for the thermally assisted hydrolysis and methylation of the compounds of interest. The resulting fatty acid and cholesterol methyl esters were separated by GC and characteristic fragment ions were detected by MS. The system was optimized and calibrated with triglyceride and cholesterol standards for quantitative analysis. The possible interference by phospholipids with the quantitative results was investigated and found to be of minor importance.The concentrations and lipoprotein profiles of triglycerides and cholesterol were determined in a pooled serum sample of healthy volunteers and a serum sample of a sepsis patient. The results obtained with the GC–MS approach were compared with those of a previously developed method based on AsFlFFF with a dual enzymatic reaction detection system. A good agreement of the profiles was found, for cholesterol as well as for the triglycerides, even when the GC–MS method quantifies the fatty acids while with the enzymatic reaction method the glycerol concentrations are determined. Total cholesterol and triglyceride concentration values for the serum samples showed good agreement with the results of the standard enzymatic method as used in practice in the university hospital.     

Instability of spatial patterns and its ambiguous impact on species diversity

Self-arrangement of individuals into spatial patterns often accompanies and promotes species diversity in ecological systems. Here, we investigate pattern formation arising from cyclic dominance of three species, operating near a bifurcation point. In its vicinity, an Eckhaus instability occurs, leading to convectively unstable "blurred" patterns. At the bifurcation point, stochastic effects dominate and induce counterintuitive effects on diversity: Large patterns, emerging for medium values of individuals' mobility, lead to rapid species extinction, while small patterns (low mobility) promote diversity, and high mobilities render spatial structures irrelevant. We provide a quantitative analysis of these phenomena, employing a complex Ginzburg-Landau equation.