Adsorption of cationic cellulose derivative/anionic surfactant complexes onto solid surfaces. II. Hydrophobized silica surfaces

The effect of the anionic surfactant SDS (sodium dodecyl sulfate) on the adsorption behavior of cationic hydroxyethyl cellulose (Polymer JR-400) and hydrophobically modified cationic cellulose (Quatrisoft LM-200) at hydrophobized silica has been investigated by null ellipsometry and compared with the previous data for adsorption onto hydrophilic silica surfaces. The adsorbed amount of LM-200 is found to be considerably larger than the adsorbed amount of JR-400 at both surfaces. Both polymers had higher affinity toward hydrophobized silica than to silica. The effect of SDS on polymer adsorption was studied under two different conditions: adsorption of polymer/SDS complexes from premixed solutions and addition of SDS to preadsorbed polymer layers. Association of the surfactant to the polymer seems to control the interfacial behavior, which depends on the surfactant concentration. For the JR-400/SDS complex, the adsorbed amount on hydrophobized silica started to increase progressively from much lower SDS concentrations, while the adsorbed amount on silica increased sharply only slightly below the phase separation region. For the LM-200/SDS complex, the adsorbed amounts increased progressively from very low SDS concentrations at both surfaces, and no large difference in the adsorption behavior was observed between two surfaces below the phase separation region. The complex desorbed from the surface at high SDS concentrations above the critical micelle concentration. The reversibility of the adsorption of polymer/SDS complexes upon rinsing was also investigated. When the premixed polymer/SDS solutions at high SDS concentrations (>5 mM) were diluted by adding water, the adsorbed amount increased due to the precipitation of the complex. The effect of the rinsing process on the adsorbed layer was determined by the hydrophobicity of the polymer and the surface.     

New ferromagnets of Sr8ARe3Cu4O24 (A=Sr, Ca) with an ordered perovskite structure

New phases Sr₈ARe₃Cu₄O₂₄ (A=Sr,Ca) were discovered under high-pressure/high-temperature condition. X-ray powder diffraction and electron diffraction studies for these phases indicated that they have an ordered perovskite-type structure with cubic lattices of ∼8 Å. They showed ferromagnetism at room temperature when they were synthesized under high-oxygen-pressure condition. The Ca-containing phase has a very high T_c of 440 K with a spontaneous magnetization of ∼1 μ_B/f.u.     

Microbiological synthesis of 16-ketopregnanes from steroidal sapogenins

Incubation of diosgenone (1, 25D-spirost-4-en-3-one) with Verticillium theobromae (Turconi) Mason et Hughes (CBS) afforded 20α-hydroxypregn-4<ne-3,16-dione (3) and 3α,11β,20α-trihydroxy-5α-pregnan-16-one (4). The same transformation products were also obtained by the use of Stachylidium bicolor Link (IFO 6647). Isolation and identification processes of the products are discussed.     

Fabrication of mesoporous ZnO nanosheets from precursor templates grown in aqueous solutions

Mesoporous ZnO nanosheets were successfully prepared by pyrolytic transformation of zinc carbonate hydroxide hydrate, Zn₄CO₃(OH)₆·H₂O. The nanosheets were initially formed as assemblies on glass substrates during chemical bath deposition (CBD) in aqueous solutions of urea and zinc acetate dihydrate, zinc chloride, zinc nitrate hexahydrate, or zinc sulfate heptahydrate at 80°C. It was key to induce heterogeneous nucleation of Zn₄CO₃(OH)₆·H₂O by promoting a gradual hydrolysis reaction of urea and controlling the degree of supersaturation of zinc hydroxide species. Morphology of Zn₄CO₃(OH)₆·H₂O was largely influenced by the anions present in the CBD solutions. The Zn₄CO₃(OH)₆·H₂O nanosheets were transformed into wurtzite ZnO by heating at 300°C in air without losing the microstructural feature.     

(2,7-Disubstituted-1,8-biphenylenedioxy)bis(dimethylaluminum) as bidentate organoaluminum Lewis acids: elucidation and synthetic Utility of the double electrophilic activation phenomenon

A series of (2,7-disubstituted-1,8-biphenylenedioxy)bis(dimethylaluminum) (2) has been readily prepared in situ by treatment of the requisite 2,7-disubstituted-1,8-biphenylenediol (1) with Me3Al (2 equiv) in CH2Cl2 at room temperature; this primarily relies on the successful establishment of a new synthetic procedure of 1 starting from inexpensive m-anisidine. Evaluation of 2 as a bidentate organoaluminum Lewis acid has been performed by the reduction of ketonic substrates using Bu3SnH as a hydride source in comparison to the conventional monodentate Lewis acid dimethylaluminum 2,6-xylenoxide (11), uncovering the significantly high activation ability of 2 toward carbonyl. Particularly, (2,7-dimethyl-1,8-biphenylenedioxy)bis(dimethylaluminum) (2a) exerted the highest reactivity, which has also been emphasized in the Mukaiyama aldol reaction. The structure of the bidentate Lewis acid 2 was unambiguously determined by single-crystal X-ray diffraction analysis of 2g possessing a bulky 3,5-di-tert-butylphenyl substituent, revealing the rigid dimeric assembly in the solid state. The double electrophilic activation of carbonyl substrate by 2a has been supported by low-temperature 13C NMR analysis as well as theoretical study using the Gaussian 98 program. Moreover, unique stereoselectivity has been observed in the 2a-promoted Mukaiyama Michael addition, and highly chemoselective functionalization of carbonyl compounds in the presence of their acetal counterparts has been realized using 2a. Finally, the effectiveness of 2a for the activation of ether functionality has been demonstrated in the Claisen rearrangement of allyl vinyl ethers.     

Isolation,chemical characterization and structure of ansamitocin,a new antitumor ansamycin antibiotic

In this paper we report the isolation, chemical characterization and structural elucidation of Ansamitocin, a new antitumor antibiotic obtained from Nocardia No. C-15003 (N-1). Ansamitocin P-3, P-3' and P-4 with molecular formulae C₃₂H₄₃ClN₂O₉, C₃₂H₄₃ClN₂O₉ and C₃₃H₄₅ClN₂O₉, respectively, were identified as novel antibiotics. Their UV spectra resemble that of maytansine obtained from a plant source. Analysis of the PMR spectrum and spin-decoup studies of P-3 demonstrated that its skeletal structure was the same as that of maytansine. Reductive cleavage of each antibiotic gave maytansinol (P-0). Alkali hydrolysis of P-3, P-3' and P-4 gave isobutyric, butyric and isovaleric acids, respectively. P-3, P-3' and P-4 were concluded to be the isobutyrate, butyrate and isovalerate ester of maytansinol at C-3, respectively. An antitumor plant product, maytanacine, and its semisynthetic derivative, maytansinol propionate, were also produced by the same strain.     

Cover Picture

The cover picture shows a section of the electron charge density of the first metal carbide endohedral metallofullerene (Sc(2)C(2))@C(84) obtained from a synchrotron X-ray powder diffraction study by the maximum entropy method (MEM). The several density maxima, which correspond to scandium and carbon atoms, are clearly seen inside the C(84) carbon cage. The MEM charge density distribution also reveals that the C(84) cage has D(2d) symmetry (no. 23) and that the C(2) axis is parallel to the <100> face-centered cubic (fcc) direction of the unit cell. As a consequence of the site symmetry being 4mm, the C(2) axis of (Sc(2)C(2))@C(84) is oriented to six equivalent <100> directions and shows a merohedral disorder. The resultant Sc small middle dot small middle dot small middle dotSc distances and C-C bond lengths of the Sc(2)C(2) cluster are 0.429(2) and 0.142(6) nm, respectively. The observed C-C bond length is between that of a typical single and a double bond, and is very close to that of the C-C bond (0.143 nm) combining two pentagons in a C(60) molecule. More about this fascinating structure can be found in the contribution by Shinohara and co-workers on p. 397 ff.     

Long-range magnetic ordering of quasi-one-dimensional S=1/2 Heisenberg antiferromagnet Sr2Cu(PO4)2

Magnetic properties of quasi-one-dimensional S=1/2 Heisenberg antiferromagnet Sr₂Cu(PO₄)₂ were investigated by temperature and field dependence of AC susceptibility down to 0.03 K. A sharp peak was observed at on the temperature dependence of AC susceptibility indicating long-range magnetic ordering. Taking into account the exchange constant, (Hamiltonian =J∑S_iS_i+1), the ratio k_BT_N/J is 0.06%. Sr₂Cu(PO₄)₂ is, therefore, one of the best one-dimensional Heisenberg antiferromagnet known so far.     

Metal-induced supramolecualr chirality in an optically active polythiophene aggregate

Chiral polythiophenes (PTs), in sharp contrast to other optically active polymers, exhibit optical activity in the pi-pi* transition region which is derived from the chirality of the main chain when they self-assemble to form a supramolecular pi-stacked aggregate with intermolecular interactions in a poor solvent or in a film. We now report that the regioregular, optically active PT poly[(R)-3-[4-(4-ethyl-2-oxazolin-2-yl)phenyl]thiophene] (poly-1) exhibits unique split-type induced circular dichroism (ICD) in the pi-pi* transition region of the main chain upon complexation with various metal salts such as trifluoromethanesulfonates of copper(I), copper(II), silver(I), and zinc(II), and iron(II) perchlorate in chloroform, which is a good solvent for poly-1. The appearance of ICD and slight changes in the UV/Vis spectra (no color change), except for the zinc salts, indicated that the chirality may not be induced by chiral pi-stacked aggregates of poly-1, but by the chirality of the main chain, for example, a predominantly one-handed helical structure induced by intermolecular coordination of the oxazoline groups to metal ions. The sign of the Cotton effect depends on the metal salt; most metal salts induced ICDs with similar Cotton-effect patterns, while zinc salts caused an inversion of the signs of the Cotton effect of poly-1 accompanied by a gradual red shift in the absorption of up to 125 nm. The changes in the conformation and the size of the poly-1 aggregates induced by different metal salts were also investigated by (1)H NMR titrations, static light scattering (SLS), atomic force microscopy (AFM), and membrane filtration. On the basis of these results, we propose a possible model for the chiral supramolecular aggregates of poly-1 with metal salts.