The Quantum Coherence Effects in Degenerate Two-level Atomic System

The quantum coherence effects of the transition Fe = 2←→Fg = 3 depending on the polarization of the coupling and probe beam are observed in a Cs vapor cell. The splitting of electromagnetically induced transparency （EIT） window is observed when the degeneracy of two-level system is broken using a magnetic field. It is also shown that the splitted transparency points of two of three windows are shifted with the intensity of magnetic field （ i. e. Zeeman splitting in the upper and lower levels ） increasing. On the contrary, when we fix the intensity of magnetic field, and increase the Rabi frequency of the coupling beam, the splitted transparency peaks become wider. A qualitative agreement between experiment and theory is found.     

可重构制造系统重组过程中设备选择模型的研究

根据生产任务选择加工设备进行制造资源重组是实现可重构制造系统的关键问题之一，由于设备的选择涉及到多种因素，既有定量指标，又有定性指标，传统的依靠人工经验的方法显得力不从心。本文首先结合实际情况，提出了一套设备选择评价体系，通过对模糊判断矩阵采用最小对数二乘法确定各评价因素的权重系数，针对定性指标和定量指标采用不同的方法确定其性能指标值，通过模糊积分对评判指标进行综合评判，最后进行了实例研究。所提出的方法有效地简化了决策过程，为可重构制造系统设备选择提供了一套行之有效的方法。     

Banach空间中优化问题的最优性条件

首先在Contingent切锥意义下界定了Banach空间中非空集合的伪切锥和伪凸性的概念，并讨论了相应的性质，然后针对可微优化问题，在广义凸性假设下，建立了最优性条件。     

铝互连线的电迁移问题及超深亚微米技术下的挑战

铝互连线的电迁移问题历来是微电子产业的研究热点，其面临的电迁移可靠性挑战也是芯片制造业最持久和最重要的挑战之一.从20世纪90年代开始，超深亚微米(特征尺寸≤0.18 μm)铝互连技术面临了更加复杂的电迁移可靠性问题.从电迁移理论出发，分析概括了铝互连电迁移问题的研究方法，总结了上世纪至今关于铝互连电迁移问题的主要经验；最后结合已知的结论和目前芯片制造业现状，分析了当前超深亚微米铝互连线电迁移可靠性挑战的原因和表现形式，提出了解决这些问题的总方向. 关键词： 电迁移 铝互连 微结构     

异质结构光子晶体的能带特性研究

运用光学传输矩阵理论,研究了异质结构光子晶体的能带特性。结果表明,与周期结构相比异质结构光子晶体可以显著地拓宽光子晶体的光子带隙;在该文提出的结构中引入缺陷,与(1H1L)m(1H)n(1L1H)m光子晶体相比,产生缺陷模式光子带隙范围明显拓宽,适当调整缺陷层的数目、位置和厚度可得到多通道滤波;并研究了实际操作中随机误差带来的影响,随无序度的增大,其带宽基本不变。     

基于远场的拼接光栅压缩池的设计

 利用傅里叶光学方法得到了失调拼接光栅压缩池输出光束的远场振幅表达式，建立了分析拼接光栅的各种误差的理论模型，得到了拼接误差对脉冲的影响是附加相位延迟和角度偏转。在要求远场的一倍衍射极限区域的积分能量分布达到理想情况下的90％的条件下，对于含有口径为40 cm、脉宽为0.1~10 ps脉冲的系统进行分析并分别得到了各种误差的容限。     

Molecular dynamics simulation of processing using AFM pin tool

A three-dimensional molecular dynamics (MD) model is utilized to investigate the effect of tool geometry on the deformation process of the workpiece and the nature of deformation process at the atomic-scale. Results show that different states exist between the atomic force microscope (AFM) pin tool and the workpiece surface, i.e. the non-wear state, the ploughing state, the state in which ploughing is dominant and the state in which cutting plays a key role. A relationship between the deformation process of the workpiece and the potential energy variation is presented. The potential energy variation of atoms in different deformed regions in the workpiece such as plastically deformed region, elastically deformed region and the mixed deformation region is different. The features of variations of potential energy are discussed.     

Canonical Modules of Semigroup Rings and a Conjecture of Reiner

We prove that the homotopy types of two naturally defined simplicial complexes are related in the following way: one is homotopy equivalent to a multiple suspension of the canonical Alexander dual of the other. These simplicial complexes arise in free resolutions of semigroup rings and modules. The relation between their homotopy types was conjectured by Reiner, and was suggested by a homological consequence of a result due independently to Danilov and Stanley on canonical modules of normal semigroup rings. Our proof is purely topological, and gives an alternative proof of their result. We also prove a generalization of a result of Hochster saying that these rings are Cohen—Macaulay, and indicate a new proof of Ehrhart's reciprocity law for rational polytopes. Received October 3, 2000, and in revised form April 2, 2001, and May 10, 2001. Online publication November 7, 2001.     

甲基紫掺杂聚乙烯醇薄膜材料红光多重全息存储

甲基紫掺杂聚乙烯醇薄膜材料在两束相干光照射下生成相位光栅.当改变一束相干光光程,通过监测相位光栅的一级衍射信号强度的变化,可以检测相位光栅的生长和擦除过程.在此实验基础上,讨论了甲基紫掺杂聚乙烯醇薄膜材料多重全息存储的原理与结果.