新显色剂2-[2-(5-溴-噻唑)偶氮]-5-二甲氨基苯甲酸与铑的显色反应的研究

本文研究了新显色剂5-Br-TAMB与铑(Ⅱ)的显色反应。在pH5.0～7.0的水溶液中,铑(Ⅱ)与5-Br-TAMB形成1:2型稳定的蓝色配合物,其最大吸收波长为674nm,表观摩尔吸光系数为1.1×10~5L·mol~(-1)·cm~(-1),铑(Ⅱ)含量在0～12μg/ml范围内服从比耳定律。采用加入适量EDTA的方法消除了Cu~(2+)、Co~(2+)、Ni~(2+)等干扰离子。建立了一个在二元配合物体系中具有高灵敏度及选择性、稳定、简便地吸光光度测定微量铑(Ⅱ)的新方法。     

3,4—亚甲二氧基苯甲酸锡酯的合成及表征

３，４－亚甲二氧基苯甲酸及其取代物与三苯基氢氧化锡或二丁基化锡反应合成了５个锡酯，通过元素分析，ＩＲ和＾１ＨＮＭＲ对其进行了表征。     

Kinetic investigation of the textile bleaching process

Volumetric H₂-uptake measurements on an Mo₂N (79 m²g^–1) sample reduced at 673 K have been carried out and the uptake isotherms in the temperature range of 308–623 K have been determined. Both the total and reversible hydrogen uptake increased with the uptake temperature. The irreversible hydrogen uptake increased abruptly when the uptake temperature was raised up to 423 K. The maximum of irreversible hydrogen uptake was measured at 473 K. The H_IR/Mo ratio calculated from the uptakes obtained in the temperature range of 308–623 K varies in the range of 0.0010–0.0202. One possible mechanism for hydrogen adsorption is proposed to be heterolytic dissociation on Mo-N paris, in which the molybdenum atoms are in unsaturated coordination.     

介质对配合物稳定性的影响——Ⅳ. Cu(SCN)+-NaNO3-tert-Butyl Alcohol-H2O体系，25℃

本文用分光光度法确定了25℃下配阳离子Cu(SCN)⁺在NaNO₃-叔丁醇-水介质中的稳定常数。混合溶剂中叔丁醇组成为0，5，10，15，20和25 wt%，离子强度范围为0.2～3.0 mole·dm^-3，溶液的pH=1.5～1.6。基于Pitzer理论用最小二乘多项式逼近法，确定了混合溶剂中配合物热力学稳定常数。讨论了配位反应的一级介质效应。     

模式识别—人工神经网络在化学中的若干新应用

本文通过我们应用模式识别－人工神经网络方法预报新化合物、熔盐相图以及复杂化学反应体系的研究，展示应用模式识别－人工神经网络方法与物理化学理论相结合，研究化学现象的可能性和应用价值。     

稀土对耐候钢夹杂物的变质和耐蚀性能的影响

通过金相光学显微镜、扫描电镜及能谱仪,金相定量图象分析仪、非水电解分离夹杂 ICP方法分析固溶稀土含量、电化学腐蚀性能等分析测试手段研究了稀土在耐候钢中存在的形式、非金属夹杂物的形态、尺寸、分布及对耐蚀性能的影响.     

EFFECT OF MOLECULAR WEIGHT OF PDMS ON MORPHOLOGY AND MECHANICAL PROPERTIES OF PP/PDMS BLENDS

 A series of polydimethylsiloxane (PDMS) with varied molecular weights (Mw = 3  106, 1  106 and 0.5  106) were melt blended with PP to investigate the effect of PDMS molecular weight (MW) on the morphology and mechanical properties of PP/PDMS blends. Scanning electron microscopic (SEM) examination showed that the size of PDMS domains was dependent on the MW of PDMS. It was found that the lower the value of PDMS MW, the better dispersion of the PDMS domains in the PP matrix. Tensile and Izod impact tests revealed that the addition of PDMS with lower MW would lead to a more significant increase in impact strength of the blends compared with the blends with higher MW ones, while the influence of the molecular weight on tensile strengths of the blends was relatively small in the MW range studied. Differential scanning calorimetry (DSC) results also showed that the crystallization temperature of PP was increased with decreasing PDMS MW, indicating a better nucleation capability of lower MW of PDMS. Melting flow rate (MFR) measurements indicated that the processibility of PP could be enhanced by adding PDMS, and again the lower MW PDMS resulted in better data. Our work demonstrates that not only the processibility but also the mechanical properties of PP could be enhanced to a more significant degree by using low MW PDMS than the higher ones.     

活性酚醛树脂中羟甲基含量的测定

本文提出一种酚醛树脂中羟甲基含量的化学分析法，分别以＾１３ＣＮＭＲ和化学分析法测定酚醛树脂的羟甲基含量。将两种测试结果与已知的投料量进行比较，证明所建立的化学分析法可行。     

六极杆碰撞反应池-等离子体质谱测定生物样品中痕量铬和钒

采用带六极杆碰撞反应池的电感耦合等离子体质谱直接测定了生物样品中痕量铬和钒。在碰撞反应池中引入He/NH3(93∶7)混合气,有效地消除了分子离子(ArC 、NCl 、Cl O 、Cl OH 等)对超痕量铬、钒测定的干扰,降低了方法的检出限。比较了干法灰化和湿法消解两种样品处理方法,两种消解方式获得的结果基本一致。方法的检出限(3σ):钒为0.005 0μg.g-1,铬为0.001 8μg.g-1。相对标准偏差:钒为3.25%~14.08%;铬为4.20%~8.24%。经国家一级生物标准物质验证,测定值与标准值吻合。     

Sensitive Determination of DNA by Resonance Light Scattering with Pentamethoxyl Red

A novel sensitive method for the determination of nucleic acid (DNA) using the resonance light scattering (RLS) spectra of pentamethoxyl red has been developed. It is based on the effects on the resonance light scattering of Pentamethoxyl Red. The effective factors and the optimum conditions were studied, and the enhanced intensity of RLS is in proportion to the concentration of nucleic acids in the range of 0–2.54 µg mL⁻¹ for ct-DNA, 0–4.54 µg mL⁻¹ for hs-DNA. The limits of detection are 1.1 and 2.1 ng mL⁻¹, respectively. Most foreign substances do not interfere in the determination, and the method has good selectivity and high sensitivity. It has been applied to the determination of DNA in synthetic samples and in real samples with satisfactory results.