Gain Measurement and Anomalous Decrease of Peak Gain at Long Wavelength for InAs/GaAs Quantum-Dot Lasers

Mode gain spectrum is measured by the Fourier series expansion method for InAs/GaAs quantum-dot （QD） lasers with seven stacks of QDs at different injection currents. Gain spectra with distinctive peaks are observed at the short and long wavelengths of about 1210nm and 1300nm. For a QD laser with the cavity length of 1060μm, the peak gain of the long wavelength first increases slowly or even decreases with the injection current as the peak gain of the short wavelength increases quickly, and finally increases quickly before approaching the saturated values as the injection current further increases.     

Hyperbolic Bending of Vortex Lines with Finite Number and Length in Rotating Trapped Bose-Einstein Condensates

The minimal energy configurations of hyperbolic bending vortex lines in the rotating trapped Bose-Einstein condensates are investigated by using a variational ansatz and numerical simulation. The theoretical calculation of the energy of the vortex lines as a function of the rotation frequency gives self-consistently vortex number, curvature and configuration. The numerical results show that bending is more stable than straight vortex line along the z-axis, and the vortex configuration in the xy-plane has a little expansion by increasing z.     

Induced Diffraction in Phase-Mismatched Second-Harmonic Generation

We show analytically that in phase-mismatched second-harmonic generation, an effective diffraction is induced at the second-harmonic （SH） frequency. Numerical simulation results agree with the analytical predictions. Compared to the case of linear propagation, the effect of the overall diffraction at the SH frequency becomes doubled due to the induced diffraction, which causes an interesting result that the SH beam width will be larger than that of the fundamental field.     

抽取信号的χ2分布拟合方法

BESⅡ上测量ψ(2S)辐射衰变时, 鉴于本底道的污染非常严重, 提出了一种抽取信号事例数的χ²拟合方法. 大量的蒙特卡罗模拟表明, 信号道与各个本底道的χ²分布形状各不相同. 这些特点提供了从数据的χ²分布中抽出信号道事例数的χ²拟合方法. 从蒙特卡罗模拟的结果来看, χ²拟合方法的误差小于2%.     

f0（975）和Ф（1020）介子对中子星物质的影响

利用相对论平均场理论，考虑了σ＊，Ф介子及重子八重态{N，P，A，∑^-，∑0,∑＋，Ξ^-，Ξ^0}，研究了中子星的性质．发现当考虑了σ＊，Ф介子的贡献时，超子出现的临界重子数密度降低了，超子数目增加了，超子星的转变密度poH降低了，物态方程变软，最大质量变小而相应的中子星半径增大，中子星的中心重子数密度、中心能量密度和中心压强均降低．     

顶色辅助的人工色模型下顶夸克极化效应的研究

在顶色辅助的人工色(TC2)理论下, 在强子对撞机上研究了顶夸克-反顶夸克对的产生过程中顶夸克的极化效应, 在计算过程中, 运用了MRS set A'部分子分布函数和螺旋度投影算符的方法. 研究结果表明: 在Tevatron上顶夸克的极化效应太小不可探测; 参数选取得当, 该效应在LHC上可以探测到, 其值可达16%. 因此, 顶夸克的极化效应提供了一种切实可行的检验顶色辅助的人工色模型的方法.     

Impact of organic contamination in vacuum on laser-induced damage threshold of TiO2/SiO2 dielectric mirrors

The influence of organic contamination in vacuum on the laser-induced damage threshold (LIDT) of coatings is studied. TiO2/SiO2 dielectric mirrors with high reflection at 1064 nm are deposited by the electronbeam evaporation method and their LIDTs are measured in vacuum and atmosphere, respectively.It is found that the contamination in vacuum is easily attracted to optical surfaces because of the low pressure and becomes the source of damage, O2 molecules in vacuum with contamination can accelerate the laser-induced damage by observing LIDT and damage morphologies. LIDTs of mirrors have a little change in vacuum compared with in atmosphere when the organic contamination is wiped off. The results indicate that organic contamination is a significant reason to decrease the LIDT in vacuum.     

一维随机激光器中准态模的饱和特性研究

针对随机激光器的半经典理论是应用电磁场时域有限差分法数值求解半经典随机激光模型方程组，基于半经典理论数值研究了一维随机激光器中准态模式的饱和特性，获得了不同准态模的空间分布和频谱分布图。计算结果分析显示：准态模式的某些特征参数如局域程度将会影响系统的饱和特性。利用这一结果，可以通过单频抽运方法选择具有低阈值、高饱和强度的准态模式作为整个激光系统的稳态输出模式。     

高功率宽调谐范围掺Yb3+光子晶体光纤激光器

采用闪耀光栅作为色散元件,构建了前向、后向输出两种结构的可调谐掺Yb3 光子晶体光纤激光器,并对其输出特性进行了分析研究.在抽运功率5.75W时,前向输出结构实现了1050.6～1110.2 nm的连续调谐输出,光谱线宽约0.1 nm,边模抑制比大于44 dB.在调谐激光波长为1085 nm时,得到最高输出功率677 mW.结构改进的后向输出结构的可调谐输出结构在抽运功率4.43 W,调谐波长1075 nm,实现了2.21 W的功率输出,斜率效率为73%;调谐范围50.9 nm(1042.1～1093 nm),光谱线宽小于0.08 nm,边模抑制比大于50 dB.两种结构的可调谐激光器输出均为线偏振光,偏振度大于89.5%.     

扫描相机标定脉冲信号位置的确定及噪声处理

 扫描相机标定数据处理中的一个关键问题是如何准确确定脉冲信号的位置，实验数据的信噪比和脉冲信号位置的定义方法都会对标定结果的准确性产生影响。采用了取半高宽的方法来确定扫描相机标定脉冲信号的位置，在信噪比比较高 （大于100） 的情况下，该方法确定标定信号的位置可以达到亚像素水平。对于信噪比比较低 (小于10) 的实验数据，先采用快速傅里叶变换方法对其进行滤波，通过滤波可以极大地抑制噪声信号的影响，然后采用“半高宽法”确定脉冲信号的位置，最后得出可信的标定结果。当扫描相机定在0.3 ns的扫描档时，通过该方法得到的扫描速度为0.214 ps/pixel,扫描不确定度为0.002 9 ps/pixel,拟合线性相关系数为0.999 7。