Studies on synthesis and infrared and fluorescence spectra of new europium and terbium complexes with an amide-based open-chain crown ether

An amide-based open-chain crown ether ligand and its complexes with europium and terbium were synthesized. The complexes were characterized by elemental analysis, infrared spectra and conductivity. The europium and terbium ions were found to coordinate to the C=O oxygen atoms and pyridine nitrogen atoms. The fluorescence properties of these complexes in DMF and CH3OH/CHCl3 were studied. Under the excitation of UV light, these complexes exhibit characteristic fluorescence of europium and terbium ions. The solvent factors influencing the fluorescent intensity are discussed.     

泡沫铅对VRLA电池负极活性物质结构及性能影响

0引言随着36V/42V汽车电源系统的提出,新一轮汽车用电池的竞争不断加剧。从目前情况看,铅酸电池由于具有成本低廉,使用可靠,原材料来源丰富,铅回收率可高达98%等优点,因此成为电动车电源最实际的选择之一[1]。但作为电动车用电池,需要克服其比能量低、充电接受能力差和负极硫酸盐化等缺点。为此各国科学家开展了大量的研究工作。最近报道用铸造多孔体作为敞口铅酸电池的集流体,它的比表面积为14cm2·cm-3,正极活性物质利用率上升到50%,远高于传统的铸造板栅[2]。在铅酸电池集流体研究领域里另一个重大进步,就是以R V C(R etic-ulated V i…     

酰基吡唑啉酮双席夫碱配合物的电子结构、成键性与生物活性

The electronic structures of N,N′-bis[(1-phenyl-3-methyl-5-oxo-4-pyrazolinyl) α-furylmethylidyne]ethylendii- mine (and -o-phenylendiimine), and their complexes of transition metals M (M=Ni, Cu, Co, Pd, Pt) have been calculated by B3LYP method of DFT. Their geometries and bonding characters are discussed, and the relationship between their bioactivities and electronic structures are also discussed from the calculated results of electronic populations and frontier orbital energies.     

Ti-Si复氧化物载体对金催化剂上丙烯环氧化的影响

 以TiCl4和SiCl4为原料,采用水解和非水水解溶胶-凝胶两种方法制备了一系列不同Ti含量的Ti-Si复氧化物载体,继而用沉积-沉淀法制得载金催化剂. 采用X射线衍射、紫外-可见漫反射光谱、 N2吸附和高分辨透射电镜对催化剂进行了表征,并考察了催化剂在氢气和氧气存在下的丙烯气相环氧化催化性能. 研究表明,钛含量在6%～14%范围内时,两种方法制得的Ti-Si复氧化物均为无定形结构,但采用非水水解溶胶-凝胶法制得的载体比表面积较高. 以非水水解溶胶-凝胶法制备的钛含量10%的Ti-Si复氧化物为载体得到的载金催化剂表现出较高的活性和选择性,反应60 min时,丙烯转化率为5.7%, 240 min后降为3.3%, 环氧丙烷的选择性稳定于95%左右. 还考察了非水水解溶胶-凝胶的陈化时间和金沉积-沉淀溶液的pH值等对反应结果的影响.     

ZnxCd1-xS∶Ag纳米晶的合成及其光学性质研究

以巯基丙酸(MPA)为稳定剂, 利用共沉淀法制备了水溶性的Ag掺杂的ZnxCd1-xS合金型纳米晶. Ag掺杂后ZnxCd1-xS纳米晶产生新的发射峰, 并且发光效率得到了有效提高. 通过改变纳米粒子中Zn/Cd比例可有效地调控ZnxCd1-xS∶Ag纳米晶的吸收带隙宽度, 同时可以在425～603 nm之间实现对ZnxCd1-xS∶Ag纳米晶发射峰位的连续调控.     

一种新型织绵芋螺毒素可增强神经元钙电流

从中国南海织绵芋螺中分离出生物活性强、电生理效应特异的新的芋螺毒素。通过毒素分离纯化,并经生物活性测定,氨基酸测序,电生理效应等研究。分离到1种新的织绵芋螺毒素Tx7,它是由27个氨基酸组成。其序列为GCSSVCNSHTDCVTHCICTFRGCGAVN,并能引起小鼠痉挛,能增强海马神经元钙电流和提高兴奋性突触后电流的发放频率。实验表明Tx7具有较高的潜在应用价值。1实验部分1.1材料与仪器织绵芋螺,昆明种小鼠(20±2g),Bio-rad凝胶HPLC柱,BIFLEXⅢ型飞行时间质谱仪,491型蛋白质自动测序仪。     

Determination of acetone, hexanal and heptanal in blood samples by derivatization with pentafluorobenzyl hydroxylamine followed by headspace single-drop microextraction and gas chromatography–mass spectrometry

In the study, we developed a simple, rapid, sensitive, and inexpensive method for determination of the disease biomarkers of acetone, hexanal and heptanal in human blood. For the first time, derivatization of carbonyls with O-2,3,4,5,6-(pentafluorobenzyl)hydroxylamine (PFBHA) was combined with headspace single-drop microextractin (HS-SDME) and gas chromatography-mass spectrometry (GC–MS) and applied to the analysis of acetone, hexanal, and heptanal in human blood. At first, acetone, hexanal and heptanal in blood were derivatized with PFBHA and formed oximes in several seconds. Sequentially, the oximes were headspace extracted and concentrated by a microdrop solvent. Finally, the extracted oximes were analyzed by GC–MS. HS-SDME conditions and method validations were studied. Due to needing of only 2 μl organic solvent, short extraction time of 8 min, and simple operation, derivatization-HS-SDME was shown to be a rapid, simple, and inexpensive technique for analysis of acetone, hexanal, and heptanal in human blood. Moreover, it had low detection limit values from 0.24 to 0.62 nM, and good reproducibility (R.S.D. less than 12%).     

热分析动力学数据处理方法的研究进展

综述了最近几年来用热分析法研究固相反应动力学的数据处理方法的新进展，指出了现有方法的成功与局限性，介绍了几种新的动力学处理方法及一种新的热分析技术。     

Synthesis of a novel methacrylic monomer iniferter and its application in surface photografting on crosslinked polymer substrates

(Methacryloyl ethylenedioxycarbonyl) benzyl N,N‐diethyldithiocarbamate (HEMA‐E‐In) was synthesized and used as a monomer iniferter to develop a novel, photopatternable grafting technology. This molecule functions as both a methacrylic monomer and a photoiniferter (photoinitiator–transfer agent–terminator). The structure of HEMA‐E‐In was characterized by ¹H NMR, Fourier transform infrared, and ultraviolet–visible spectroscopies. In the presence of the monomer iniferter, methyl methacrylate was polymerized by exposure to 365‐nm ultraviolet radiation, confirming the initiation capability of HEMA‐E‐In. After the copolymerization of HEMA‐E‐In into a methacrylate‐based polymer, attenuated total reflectance Fourier transform infrared spectra revealed that the photoiniferter functionality was present at the surface of this polymeric substrate. Photografting of poly(ethylene glycol) monomethacrylate monomer from the surface caused a significant change in the hydrophobicity of the surface as demonstrated by contact angle measurements. The novel monomer photoiniferter HEMA‐E‐In initiates the polymerization of bulk monomer and provides a reactive functionality that facilitates further initiation and polymer modification by the polymerization of different monomers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1885–1891, 2002