多通道超声兰姆波检测板状结构中的裂纹

超声兰姆(Lamb)波在结构缺陷检测方面愈来愈受到重视,但目前Lamb波的应用局限于单信号源激励,单通道接收的方法,容易受到噪声干扰,其后续的信号分析处理也比较复杂。本文旨在采用多通道Lamb波对板状结构中的裂纹进行定量分析与诊断。在铝板的表面凿刻出不同深度的凹槽作为裂纹,通过线阵换能器采集在一定传播距离内的多通道Lamb波信号,并采用二维傅里叶变换分析在不同深度的裂纹下,Lamb波模式能量的变化规律。结果表明,相对于完好铝板中的Lamb波信号,裂纹的存在会使Lamb波发生模式转换现象,并且转换模式能量百分比随裂纹深度的增加而线性增加。其结果为Lamb波评价板状结构中的裂纹状况提供了一种可能的方法。     

Drag reduction by coupled systems: microbubble injection with homogeneous polymer and surfactant solutions

 The influence of homogeneous surfactant and homogeneous polymer solutions on the performance of microbubble skin friction reduction was investigated on an axisymmetric body. Carbon dioxide was injected into water, homogeneous surfactant (Aerosol OT) solutions, and homogeneous dilute polymer (Polyethylene oxide) solutions. Integrated skin friction measurements were obtained at two freestream velocities as a function of gas injection rate and polyethylene-oxide concentration. A moderate (50%) decrease in surface tension had little to no effect on the drag reducing characteristics of microbubble injection. At similar gas injection rates, microbubble injection exhibited more drag reduction in the polymer solutions than obtained with microbubble injection into water. However, the increased drag reduction obtained with polymer additives was no more than a multiplicative factor related to the baseline levels of drag reduction achieved by the individual methods, and suggests the mechanism for microbubble skin friction reduction acts independently of the polymer drag reduction. Received: 17 April 1998 / Accepted: 12 October 1998     

冷冻干燥中升华界面移动的微CT实验研究

采用微CT扫描仪的扫描成像,图像重构及灰度值分析技术对不同厚度苹果片冷冻干燥的升华过程进行实验观察,分析了界面的移动特性.结果表明,对于单面传导加热的升华干燥过程,物料升华不仅在顶面进行,与搁板接触的底面以及侧面也会有水蒸气逸出.厚物料在升华过程中有一个明显的球形冻结区,升华界面呈三维模式逐渐向物料几何中心收缩.无论物料厚薄,刚开始升华干燥速率比较快,随着干燥层的增厚,升华过程的热质阻力增大,升华速率减慢.