Chromatographic evaluation of poly (trans-1,2-cyclohexanediyl-bis acrylamide) as a chiral stationary phase for HPLC

Chiral stationary phases (CSPs) based on polymeric (R,R)- or (S,S)-1,2-diaminocyclohexane (DACH) derivatives are synthesized. When bonded to 5 microm porous spherical silica gel, the poly (trans-1,2-cyclohexanediyl-bis acrylamide) based poly-cyclic amine polymer (P-CAP) stationary phases is proved to be effective chiral stationary phases that could be used in the normal-phase mode, polar organic mode and with halogenated solvents mobile phases, if desired. Since these are entirely synthetic CSPs, the elution order of all enantiomers can be reversed between the (R,R) P-CAP and (S,S) P-CAP columns. Because of the high loading of chiral selectors, the columns exhibit very high sample capacities. Thus, P-CAP columns are useful for preparative and semi-preparative enantiomeric separations. The application of these CSPs and optimization of their separations are discussed.     

Magnetic cobalt nanowire thin films

Two-dimensional (2D) and three-dimensional (3D) magnetic cobalt nanowire thin films with tunable 3-10 nm wire diameters have been electrodeposited using mesoporous silica templates containing 2D hexagonal or 3D cubic pore channels. As compared to bulk cobalt films, the cobalt nanowire thin films exhibit enhanced coercivities and controllable magnetic anisotropy through tuning of the mesostructure and dimension of the nanowires. Such novel magnetic nanowire thin films may provide a new platform for high-density information storage applications.     

General combinatorics of RNA hairpins and cloverleaves

For an abstract single-strand RNA, a combinatorial analysis is given for two important structures, hairpins and cloverleaves. The total number of hairpins and cloverleaves of a given length with minimal hairpin loop length m(m > 0) and with minimal stack length l(l > 0) is computed, under the assumption that all base pairs can occur.     

Synthesis of 5′‐O‐(2‐Azido‐2‐deoxy‐α‐D‐glycosyl)nucleosides and Their Antitumor Activities

The 1,3,4,6‐tetra‐O‐acetyl‐2‐azido‐2‐deoxy‐β‐D ‐mannopyranose ( 4 ) or the mixture of 1,3,6‐tri‐O‐acetyl‐2‐azido‐2‐deoxy‐4‐O‐(2,3,4,6‐tetra‐O‐acetyl‐β‐D ‐galactopyranosyl)‐β‐D ‐mannopyranose ( 10 ) and the corresponding α‐D ‐glucopyranose‐type glycosyl donor 9 / 10 reacted at room temperature with protected nucleosides 12 – 15 in CH₂Cl₂ solution in the presence of BF₃?OEt₂ as promoter to give 5′‐O‐(2‐azido‐2‐deoxy‐α‐D ‐glycosyl)nucleosides in reasonable yields (Schemes 2 and 3). Only the 5′‐O‐(α‐D ‐mannopyranosyl)nucleosides were obtained. Compounds 21, 28, 30 , and 31 showed growth inhibition of HeLa cells and hepatoma Bel‐7402 cells at a concentration of 10 μM in vitro.     

CH2(X 3B1)自由基与O2的反应

用时间分辨富里叶红外发射谱仪（ＴＲ－ＦＴＩＲＳ）研究了ＣＨ２（Ｘ＾３Ｂ１）自由基与Ｏ２反应的通道及产物的振动动态布居，基电子态自由基ＣＨ２（Ｘ＾３Ｂ１）由３５１ｎｍ紫外激光光解ＣＨ２ＣＯ生成，观测到振动发态反应产物ＣＯ（ｖ≤１０），ＣＯ２（ｖ３≤７）ＯＨ（Ｈ２Ｏ）和Ｈ２ＣＯ的红外发射，证实存在生成Ｈ２ＣＯ的通道，由光谱拟合得到不同时刻ＣＯ（ｖ）和ＣＯ２（ｖ３）的相对振动布居，发现ｖ＝４能级的布居数     

Preparation of novel,high‐modulus,swollen‐ or jungle‐gym‐type polyimide gels end‐crosslinked with 1,3,5‐tris(4‐aminophenyl)benzene

A novel preparation approach for high‐performance polyimide gels that are swollen or have a jungle‐gym‐type structure is proposed. A new rigid and symmetric trifunctional amine, 1,3,5‐tris(4‐aminophenyl)benzene (TAPB), was synthesized as a crosslinker. Three different kinds of amic acid oligomers derived from pyromellitic dianhydride (PMDA), 4,4′‐oxydiphthalic anhydride (ODPA), p‐phenylenediamine (PDA), and 4,4′‐oxydianiline (ODA) were end‐crosslinked with TAPB at a high temperature to make polyimide networks with different structures. Transparent polyimide gels were obtained from the ODPA–ODA/TAPB series with high compression moduli of about 1 MPa at their equilibrium swollen states in N‐methylpyrrolidone. Microscopic phase separation occurred during the gelation–imidization process when polyimide networks were generated from PMDA–PDA/TAPB and PMDA–ODA/TAPB. After these opaque polyimide networks were dried, a jungle‐gym‐like structure was obtained for the PMDA–PDA/TAPB and PMDA–ODA/TAPB series; that is, there was a high void content inside the networks (up to 70%) and little volume shrinkage. These polyimide networks did not expand but absorbed the solvent and showed moduli as high as those of solids. Therefore, using the highly rigid crosslinker TAPB combined with the flexible monomers ODPA and ODA and the rigid monomers PMDA and PDA, we prepared swollen, high‐performance polyimide gels and jungle‐gym‐type polyimide networks, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2501–2512, 2002     

Two New Diterpenoids from Callicarpa pedunculata

Two new diterpenoids, pedunculatic acid A (= (4R,5α,7α)‐7‐ethoxy‐9β,13β‐dioxyabiet‐8(14)‐en‐18‐oic acid; 1 ) and pedunculatic acid B (= (4S,5α,12β)‐8β,14β‐epoxy‐12‐hydroxy‐11‐oxototaran‐19‐oic acid; 2 ), together with three known sesquiterpenoids, were isolated from the Chinese medicinal herb Callicarpa pedunculata R. Brown . Their structures were elucidated by spectroscopic analyses, including 1D‐ and 2D‐NMR, and by high‐resolution mass spectrometry.     

Effect of Alkali Treatment on the Structure and Catalytic Properties of ZSM-5 Zeolite

Catalytic properties of ZSM-5 zeolite samples pretreated with NaOH solution have been investigated. The samples are characterized by XRD, SEM, chemical analysis, and N2 adsorption.The results indicate that mesopores are created in ZSM-5 crystals under alkali treatment without change the microporous structure and acidic strength of the zeolite, but the crystallinity is greatly decreased under severe treatment. IR indicates that the concentration of silanol is greatly enriched by alkali treatment. The etherification activities of ZSM-5 zeolites are greatly increased byalkali-treatment. The noticeably improved catalytic activity of treated samples is ascribed to the formation of mesopores and greatly enriched silanol group.     

Highly efficient electrocatalytic hydrogen evolution promoted by O–Mo–C interfaces of ultrafine β-Mo2C nanostructures

Optimizing interfacial contacts and thus electron transfer phenomena in heterogeneous electrocatalysts is an effective approach for enhancing electrocatalytic performance. Herein, we successfully synthesized ultrafine β-Mo₂C nanoparticles confined within hollow capsules of nitrogen-doped porous carbon (β-Mo₂C@NPCC) and found that the surface layer of molybdenum atoms was further oxidized to a single Mo–O surface layer, thus producing intimate O–Mo–C interfaces. An arsenal of complementary technologies, including XPS, atomic-resolution HAADF-STEM, and XAS analysis clearly reveals the existence of O–Mo–C interfaces for these surface-engineered ultrafine nanostructures. The β-Mo₂C@NPCC electrocatalyst exhibited excellent electrocatalytic activity for the hydrogen evolution reaction (HER) in water. Theoretical studies indicate that the highly accessible ultrathin O–Mo–C interfaces serving as the active sites are crucial to the HER performance and underpinned the outstanding electrocatalytic performance of β-Mo₂C@NPCC. This proof-of-concept study opens a new avenue for the fabrication of highly efficient catalysts for HER and other applications, whilst further demonstrating the importance of exposed interfaces and interfacial contacts in efficient electrocatalysis.

Ultrafine β-Mo₂C nanostructures encapsulated in N-doped carbon capsules featuring O–Mo–C interfaces as the active sites for HER have been unveiled.     

Luminescent Metallo‐Supramolecular Polymers

Luminescent metallo‐supramolecular polymers are a type of functional supramolecular architectures which integrates the advantages of emission, metal‐coordination, supramolecular chemistry as well as polymeric properties to realize advanced functions. Due to the abundant stimuli‐responsiveness of supramolecular assemblies and the light‐emitting properties, they have been widely applied as chemo‐sensors, light‐emitting devices, contrast agents for bio‐imaging, etc. In this review, we classify luminescent metallo‐supramolecular polymers based on the types of species (lanthanides, organometallic compounds, oligomer or polymer‐based ligands, small‐molecule‐based organic ligands) used to generate the luminescence and summarize recent developments of luminescent metallo‐supramolecular polymers. We mainly focus on the functions and applications of luminescent metallo‐supramolecular polymers and hope to give our reader a snapshot of research on luminescent metallo‐supramolecular polymers and encourage more scientists to devote into this promising area.