Thermal Performance of Laser Diode Array under Constant Convective Heat Transfer Boundary Condition

Three-dimensional heat transfer model of laser diode array under constant convective heat transfer coefficient boundary condition is established and analytical temperature profiles within its heat sink are obtained by separation of variables. The influences on thermal resistance and maximum temperature variation among emitters from heat sink structure parameters and convective heat transfer coefficient are brought forward. The derived formula enables the thermal optimization of laser diode array.     

Measuring Grüneisen Parameter of Lead by High Pressure-Jump Method

Using the technology of pressure jump, variations of temperature associated with pressure from 2.4 GPa to 4.6 GPa are measured for lead. The Grfuneisen parameter is calculated from the thermodynamic relation γ =（Ks/T）（aT/aP）s, in which substitution of △T/△P for aT/aP at median pressure is strictly justified. The correction of temperature change is carried out by analysing the experimental data, which makes the process more approaching to an adiabatic condition. The calculated values of △T/ △ P and γ gradually decrease with the increasing pressure. The decrease trend is consistent with the previous work. The γ values in the range of 2-3 GPa are averagely higher than the results of Ramakrishnan et al., indicating the effect of temperature correction. The improved method is promising for measurements of Grfineisen parameter to higher pressure range.     

Theoretical Investigation of Femtosecond-Resolved Photoelectron Spectrum of Na2 Molecules

Effect of laser fields on Na2 interaction potentials is studied by calculating the time-resolved photoelectron spectrum （TRPES） with the time-dependent wave-packet method. It is shown that the photoelectron spectrum at different delay times reflects the population in different electronic states. We inspect the periodicity of vibrational motion in neutral states, and map the vibrational wave-packet propagation in corresponding internuclear coordinate.     

利用宇宙线对BESⅢ量能器CsⅠ（Tl）晶体探测器单元的测量

利用宇宙射线进行探测器模型的性能测试是高能物理普遍采用的方法，其中最重要的步骤之一就是确定宇宙线入射的准确位置和径迹．多数采用丝室探测器来进行宇宙线的精确定位，需要很高的造价和复杂的电子学系统．本文介绍一种简单的定位方法，采用塑料闪烁体条加波移剂光纤编码读出的方式，可以实现精度为1cm的定位．据此建立了一套实验装置，对BESⅢ电磁量能器CsⅠ（Tl）晶体探测器单元的光输出强度和不均匀性进行了测量．     

MOSFET辐照诱生界面陷阱形成过程的1/f噪声研究

基于界面陷阱形成的氢离子运动两步模型和反应过程的热力学平衡假设,推导了金属-氧化物-半导体-场效应晶体管(MOSFET)经历电离辐照后氧化层空穴俘获与界面陷阱形成间关系的表达式.利用初始1/f噪声功率谱幅值与氧化层空穴俘获之间的联系,建立了辐照前的1/f噪声幅值与辐照诱生界面陷阱数量之间的半经验公式,并通过实验予以验证.研究结果表明,由于辐照诱生的氧化层内陷阱通过与分子氢作用而直接参与到界面陷阱的建立过程中,从而使界面陷阱生成数量正比于这种陷阱增加的数量,因此辐照前的1/f噪声功率谱幅值正比于辐照诱生的界面陷阱数量.研究结果为1/f噪声用作MOSFET辐照损伤机理研究的新工具,对其抗辐照性能进行无损评估提供了理论依据与数学模型.     

Demonstration of fiber pulsed light source at 1.6 μm with adjustable pulse duration

A novel practical 1.66-μm pulse light source with adjustable pulse duration is proposed. A 2.5-km Raman fiber is placed into a ring type Q-switched erbium-doped fiber laser (Q-EDFL), serving as both delay line fiber and Raman gain medium so that in addition to the wavelength shifted to 1.6μm, the pulse duration and the buildup time can be relatively extended. By properly controlling the fall edge of the acousto-optic switch (AOS), the pulse duration of 30-345 ns for ～ 770-Hz repetition frequency with power of 1-1.6 W is achieved.     

Fast algebra algorithm of shape-from-shading with specular reflectance

Shape-from-shading (SFS) is to reconstruct three-dimensional (3D) shape from a single gray image, which is an important problem in computer vision. We propose a novel SFS method based on hybrid reflection model which contains both diffuse reflectance and specular reflectance. The intensity gradient of image is in the direction that the shape of urface changes most, so we use directional derivative of the reflectance map as parts of objective function. When discrete characteristic of digital images is considered, finite difference approximates differential operator. So the reflectance map equation described by a partial differential equation (PDE) turns into an algebra equation about the nknown surface height correspondingly. Using iterative numeric computation, a new SFS method is gained. Experiments on synthesis and real images show that the proposed SFS method is accurate and fast.     

Phase-locking observed among high-order lateral modes of a broad-stripe diode array inside an external cavity

For a laser diode array (LDA) positioned in an external cavity of a certain length, a very strong inter-emitter coupling can be established between the off-axis lateral modes of the broad-stripe emitters. Under these circumstances, the phase-locked operation of the LDA due to couplings between off-axis modes of emitters has been observed, for the first time to our knowledge. The observations suggest that phase locking of a broad-stripe LDA can be achieved among different emitter lateral modes by selecting different cavity lengths.     

高性能微通道板除气过程中电阻的变化

比较了高性能微通道板和标准型微通道板在经过相同或类似制管工艺处理前、后电阻的变化，测定了高性能微通道板分别在真空烘烤和2个不同阶段电子清刷后电阻随电压及温度的变化关系。实验结果表明：高性能微通道板的热稳定性优于标准型微通道板，其电阻温度系数为-0.007/℃；经过第二阶段清刷后，电阻随电压的变化缓慢，电压系数为-1.11×10^-4V^-1；用这种材料和工艺制作的低电阻、大动态范围、高稳定性微通道板可满足特种探测器的需求。     

高功率宽调谐范围掺Yb3+光子晶体光纤激光器

采用闪耀光栅作为色散元件,构建了前向、后向输出两种结构的可调谐掺Yb3 光子晶体光纤激光器,并对其输出特性进行了分析研究.在抽运功率5.75W时,前向输出结构实现了1050.6～1110.2 nm的连续调谐输出,光谱线宽约0.1 nm,边模抑制比大于44 dB.在调谐激光波长为1085 nm时,得到最高输出功率677 mW.结构改进的后向输出结构的可调谐输出结构在抽运功率4.43 W,调谐波长1075 nm,实现了2.21 W的功率输出,斜率效率为73%;调谐范围50.9 nm(1042.1～1093 nm),光谱线宽小于0.08 nm,边模抑制比大于50 dB.两种结构的可调谐激光器输出均为线偏振光,偏振度大于89.5%.