Carbohydrate-based switch-on molecular sensor for Cu(II) in buffer: absorption and fluorescence study of the selective recognition of Cu(II) ions by galactosyl derivatives in HEPES buffer

[graph: see text] 1-(Beta-D-galactopyranosyl-1'-deoxy-1'-iminomethyl)-2-hydroxynaphthalene (L1), possessing an ONO binding core, was found to be selective for Cu2+ ions in N-[2-hydroxyethyl]piperazine-N'-[2-ethanesulfonic acid] buffer, at concentrations < or = 580 ppb, at physiological pH by eliciting switch-on behavior, whereas the other ions, viz., Mg2+, Ca2+, Mn2+, Fe2+, Co2+, Ni2+, Zn2+, and Cd2+, caused no significant change in the fluorescence. Whereas the binding characteristics were ascertained by absorption spectroscopy, the species formed were shown by Q-TOF ES MS.     

Influence of Sm<Superscript>3+</Superscript> ion in structural,morphological, and electrochemical properties of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> synthesized by microwave calcination

LiSm_xMn_2–xO₄ samples were synthesized via co-precipitation technique. The structural properties of the synthesized materials were studied using X-ray diffraction analysis and it confirmed the cubic spinel structure for all the compounds. The lattice parameter of LiMn₂O₄ was observed to be 8.2347 Ǻ and it decreased with Sm³⁺ concentration, due to the shrinkage in cell volume aided by higher binding energy between Sm-O bond. The SEM micrographs were analyzed using Image processing software (Image-J) to ascertain the pore and grain properties. The microwave synthesis had been observed to control the bulk grain formation and had yielded lesser porous and nanoparticles. The particle size distributions obtained through photocross correlation laser diffraction analysis had shown that LiMn₂O₄ with 60 nm and Sm-doped compounds with ∼30 nm, respectively. The cyclic voltammetry studies had revealed the decrease in electrocatalytic behavior in the initial cycle for compounds doped with Sm³⁺ ion. The initial capacities of LiMn₂O₄, LiSm_0.05Mn_1.95O₄ and LiSm_0.10Mn_1.90O₄ substituted compounds were observed to be 134.87 mAhg⁻¹, 132.22 mAhg⁻¹ and 126.41 mAhg⁻¹, respectively. The cells were simulated using 1D model namely Dualfoil5.1 program. The simulated results coincide well with the measured results. The cycle life studies reveal 93% capacity retention of samarium-0.05-doped samples when compared with 78.4% of the LiMn₂O₄.     

Positive definite and Gram tensor complementarity problems

Given a continuous function Open image in new window and Open image in new window , the non-linear complementarity problem \(\text{ NCP }(g,q)\) is to find a vector Open image in new window such that

$$\begin{aligned} x \ge 0,~~y:=g(x) +q\ge 0~~\text{ and }~~x^Ty=0. \end{aligned}$$

We say that g has the Globally Uniquely Solvable (\(\text{ GUS }\))-property if \(\text{ NCP }(g,q)\) has a unique solution for all Open image in new window and C-property if \(\mathrm{NCP}(g,q)\) has a convex solution set for all Open image in new window . In this paper, we find a class of non-linear functions that have the \(\text{ GUS }\)-property and C-property. These functions are constructed by some special tensors which are positive semidefinite. We call these tensors as Gram tensors.

     

An Efficient One‐Pot Synthesis of 7,7‐Dimethyl‐2‐(2‐oxo‐2H‐chromen‐3‐yl)‐4‐aryl‐7,8‐dihydroquinolin‐5(6H)‐one Derivatives Using Chitosan–SO3H as Biodegradable Organocatalyst

Chitosan sulfonic acid (CS–SO₃H), a biodegradable green catalyst, was found to be an impressive system for one‐pot four‐component reaction of different aromatic aldehydes, 3‐acetylcoumarin, dimedone, and ammonium acetate leading to 7,7‐dimethyl‐2‐(2‐oxo‐2H‐chromen‐3‐yl)‐4‐aryl‐7,8‐dihydroquinolin‐5(6H)‐one under solvent‐free condition. This methodology produces diverse superiorities such as operational simplicity, short reaction time, and high yield. Further, the catalyst can be reused for four times without any noticeable decrease in the catalytic activity.     

Microwave‐Assisted Synthesis and Antituberculosis Screening of Some 4‐((3‐(Trifluoromethyl)‐5,6‐dihydro‐[1,2,4]triazolo[4,3‐a]pyrazin‐7(8H)‐l)methyl)benzenamine Hybrids

In the present investigation, a series of 4‐((3‐(trifluoromethyl)‐5,6‐dihydro‐[1,2,4]triazolo[4,3‐a]pyrazin‐7(8H)‐yl)methyl)benzenamine analogs 6a–o were synthesized and characterized by IR, NMR (¹H and ¹³C), and mass spectra. All newly synthesized compounds 6a–o were prepared under conventional and microwave irradiation methods. These compounds obtained in higher yields and in shorter reaction times in the microwave irradiation method when compared with the conventional method. Synthesized compounds 6a–o were inspected for their in vitro antitubercular activity against Mycobacterium tuberculosis H₃₇Ra using an established XTT reduction menadione assay. Among the screened compounds, 6i (IC₅₀: 1.82 μg/mL), 6j (IC₅₀: 1.02 μg/mL), and 6k (IC₅₀: 1.59 μg/mL) showed excellent activity. Furthermore, compound 6i showed MIC₉₀ value of 16.02 μg/mL. In summary, the results indicate the identification of some novel, selective, and specific inhibitors against M. tuberculosis that can be explored further for the potential antitubercular drug.     

Achiral Trisubstituted Thioureas as Secondary Ligands to CuI Catalysts: Direct Catalytic Asymmetric Addition of α‐Fluoronitriles to Imines

Thioureas have emerged as effective hydrogen‐bonding catalysts over the last two decades, and they are broadly utilized in asymmetric catalysis. We report that achiral trisubstituted thioureas function as beneficial secondary ligands to Cu^I catalysts, thereby enabling highly diastereo‐ and enantioselective addition of α‐fluoronitriles to imines. The structure of the thiourea significantly affects the reaction outcome, and kinetic experiments indicate that the thioureas enhance the stereocontrol by binding to the Cu^I complex. The reaction products can be readily transformed into valuable β‐amino acid derivatives bearing a fluorinated tetrasubstituted stereogenic center.     

Enantioselective LC–ESI–MS/MS method for quantitation of (−)-lumefantrine and (+)-lumefantrine in mice plasma and application to a pharmacokinetic study

We developed and validated a simple, sensitive, selective, and reliable LC–MS/MS–ESI method for the direct quantitation of lumefantrine (LFN) enantiomers [(−)-LFN and (+)-LFN] in mice plasma as per regulatory guideline. LFN enantiomers and carbamazepine (internal standard) were extracted from mice plasma using Strata X SPE (solid-phase extraction) cartridges. Good resolution between enantiomers was achieved on a Chiralpak IA-3 column using an isocratic mobile phase (0.1% of diethyl amine in methanol), which was delivered at a flow rate of 0.8 mL/min. Detection and quantitation were performed using multiple reaction monitoring mode following the transitions m/z 530.27 → 512.30 and 237.00 → 194.00 for LFN enantiomers and the internal standard, respectively, in the positive-ionization mode. The proposed method provided accurate and reproducible results over the linearity range of 2.39–895 ng/mL for each enantiomer. The intra- and inter-day precisions were in the range of 1.03–6.14 and 6.36–8.70 and 2.03–4.88 and 5.82–11.5 for (−)-LFN and (+)-LFN, respectively. Both (−)-LFN and (+)-LFN were found to be stable under different stability conditions. The method was successfully used to delineate stereoselective pharmacokinetics of LFN enantiomers in mice after an oral administration of rac-LFN (20 mg/kg). The pharmacokinetic results indicated that the disposition of LFN enantiomers was stereoselective in mice.     

Transition-metal free synthesis of diaryl vinyl selenides: a simple synthetic approach with high selectivity

A simple, highly efficient synthetic protocol is developed for the synthesis of unsymmetrical diaryl vinyl selenides from diaryldiselenide and β-bromo styrene under transition-metal free conditions in N,N′-dimethyl propylene urea and 130 °C to afford high yields and excellent selectivities. This method provides a new strategy to fabricate a wide variety of important substituted molecular skeletons and an alternative to conventionally used metal salts, additives, and ligands.