Rapid trace analysis of alachlor in water and vegetable samples

The use of a rapid and specific (cross-reactivity<4%) enzyme-linked immunosorbent assay (ELISA) for the determination of alachlor residues in water and vegetable samples is addressed. The analytical method consists of a fast extraction procedure followed by an optimised ELISA. The detection limit was 0.44 microg l(-1), with a linear range from 0.89 to 143.2 microg l(-1). For alachlor extraction from water samples, different solid-phase cartridges (C, Ph, C8 and C2) were assayed using MeOH as eluent. Extracts were diluted (1:4) with distilled water before ELISA. This procedure gave recoveries close to 100% with RSDs<14%. For vegetable samples, alachlor was extracted directly with MeOH and the extracts diluted 1:40 (v/v) with saline buffer prior to ELISA. The results obtained by the proposed procedure correlate well with the reference method (multiresidue extraction-GC-MS) for vegetable samples (r>0.85).     

Spectroscopy and reactivity of a photogenerated tryptophan radical in a structurally defined protein environment

Near-UV irradiation of structurally characterized [Re(I)(CO)3(1,10-phenanthroline)(Q107H)](W48F/Y72F/H83Q/Y108W)AzM(II) [Az = Pseudomonas aeruginosa azurin, M = Cu, Zn]/[Co(NH3)5Cl]Cl2 produces a tryptophan radical (W108*) with unprecedented kinetic stability. After rapid formation (k = 2.8 x 106 s-1), the radical persists for more than 5 h at room temperature in the folded ReAzM(II) structure. The absorption spectrum of ReAz(W108*)M(II) exhibits maxima at 512 and 536 nm. Oxidation of K4[Mo(CN)8] by ReAz(W108*)Zn(II) places the W108*/W108 reduction potential in the protein above 0.8 V vs NHE.     

Copper-assisted oxidation of catechols into quinone derivatives

Catechols are ubiquitous substances often acting as antioxidants, thus of importance in a variety of biological processes. The Fenton and Haber–Weiss processes are thought to transform these molecules into aggressive reactive oxygen species (ROS), a source of oxidative stress and possibly inducing degenerative diseases. Here, using model conditions (ultrahigh vacuum and single crystals), we unveil another process capable of converting catechols into ROSs, namely an intramolecular redox reaction catalysed by a Cu surface. We focus on a tri-catechol, the hexahydroxytriphenylene molecule, and show that this antioxidant is thereby transformed into a semiquinone, as an intermediate product, and then into an even stronger oxidant, a quinone, as final product. We argue that the transformations occur via two intramolecular redox reactions: since the Cu surface cannot oxidise the molecules, the starting catechol and the semiquinone forms each are, at the same time, self-oxidised and self-reduced. Thanks to these reactions, the quinone and semiquinone are able to interact with the substrate by readily accepting electrons donated by the substrate. Our combined experimental surface science and ab initio analysis highlights the key role played by metal nanoparticles in the development of degenerative diseases.

An antioxidant catechol transforms following intramolecular redox reactions into highly reactive oxygen species, a semiquinone and a quinone, on copper.     

Nitroarene catalyzed oxidation with sodium percarbonate or sodium perborate as the terminal oxidant

A new catalytic oxidation method for the preparation of aromatic carboxylic acids from methyl aryl ketones is reported. The method is an alternative to the haloform reaction; it is benign and affords the desired product without production of any harmful side products. The catalytic cycle is based on the use of an electron-deficient nitroarene as catalyst with either of the two cheap and green oxidants sodium percarbonate or sodium perborate. The method gives a good yield (87%) and shows excellent selectivity when the model substrate (acetophenone) is oxidized. A series of benzoic acids of industrial interest were prepared by means of this method.     

Comparative assessment of solid-phase extraction clean-up procedures, GC columns and perfluoroacylation reagents for determination of type B trichothecenes in wheat by GC-ECD

Various solid-phase extraction (SPE) procedures for clean-up, two perfluoroacylation reagents (pentafluoropropionic anhydride (PFPA) and heptafluorobutyric anhydride (HFBA)) and two chromatographic columns (HP-1701 and HP-5) have been assessed comparatively to achieve the determination of type B trichothecenes (deoxynivalenol (DON), nivalenol (NIV), 3- and 15-acetyldeoxynivalenol (3- and 15-ADON)) in wheat grain by gas chromatography (GC)-electron-capture detection (ECD). Spiked wheat samples were extracted with acetonitrile-water (84:16, v/v). Tested SPE procedures were MycoSep 225 column, Florisil and different cartridges prepared in the laboratory with mixtures of various sorbents like alumina, Celite 545, C18, silica and charcoal. We propose MycoSep 225 column, and cartridges made with alumina-charcoal-silica and alumina-charcoal-C18 silica mixtures as clean-up procedures on the basis of recovery values (89.6, 87.3 and 86.1% for deoxynivalenol, respectively, at 1.0 mg/kg spiking level). The two last procedures are less expensive. Pentafluoropropionic anhydride was more stable against moisture and less expensive, while recoveries were similar to those obtained with heptafluorobutyric anhydride. HP-1701 column can separate 3- and 15-acetyldeoxynivalenol derivatives while HP-5 cannot, although this last column provided lower bleed and better sensitivity.     

Selective hydrogenation of phenylacetylene on Pd/Al2O3: Effect of the addition of Pt and particle size

Phenylacetylene hydrogenation on Pd, Pt and Pd–Pt/Al₂O₃ catalysts has been studied. In all catalysts activity was found not to depend on particle size. However, selectivity to styrene was found to depend on Pd/Al₂O₃ catalysts. Carbon deposition in both metal and support explains such a behavior. Nevertheless, in small Pd particles a longer residence time of styrene may control the selectivity.     

Three-dimensional quantitative structure-activity relationships of steroid aromatase inhibitors

Summary Inhibition of aromatase, a cytochrome P450 that converts androgens to estrogens, is relevant in the therapeutic control of breast cancer. We investigate this inhibition using a three-dimensional quantitative structure-activity relationship (3D QSAR) method known as Comparative Molecular Field Analysis, CoMFA [Cramer III, R.D. et al., J. Am. Chem. Soc., 110 (1988) 5959]. We analyzed the data for 50 steroid inhibitors [Numazawa, M. et al., J. Med. Chem., 37 (1994) 2198, and references cited therein] assayed against androstenedione on human placental microsomes. An initial CoMFA resulted in a three-component model for log(1/K_i), with an explained variance r² of 0.885, and a cross-validated q² of 0.673. Chemometric studies were performed using GOLPE [Baroni, M. et al., Quant. Struct.-Act. Relatsh., 12 (1993) 9]. The CoMFA/GOLPE model is discussed in terms of robustness, predictivity, explanatory power and simplicity. After randomized exclusion of 25 or 10 compounds (repeated 25 times), the q² for one component was 0.62 and 0.61, respectively, while r² was 0.674. We demonstrate that the predictive r² based on the mean activity (Y_m) of the training set is misleading, while the test set Y_m-based predictive r² index gives a more accurate estimate of external predictivity. Using CoMFA, the observed differences in aromatase inhibition among C6-substituted steroids are rationalized at the atomic level. The CoMFA fields are consistent with known, potent inhibitors of aromatase, not included in the model. When positioned in the same alignment, these compounds have distinct features that overlap with the steric and electrostatic fields obtained in the CoMFA model. The presence of two hydrophobic binding pockets near the aromatase active site is discussed: a steric bulk tolerant one, common for C4, C6-alpha and C7-alpha substitutents, and a smaller one at the C6-beta region.     

Chiral analysis of pollutants and their metabolites by capillary electromigration methods

Chiral separation of enantiomers is one of the most challenging tasks for any analytical technique including CE. Since the first report in 1985 showing the great possibilities of CE for the separation of chiral compounds, the amount of publications concerning this topic has quickly increased. Although chiral electromigration methods have mainly been used for enantioseparation of drugs and pharmaceuticals, they have also been applied to analyze chiral pollutants. This article intends to provide an updated overview, including works published till January 2005, on the principal applications of CE to the chiral analysis of pollutants and their metabolites, with special emphasis on articles published in the last 10 years. The main advantages and drawbacks regarding the use of CE for chiral separation of pollutants are addressed including some discussion on the foreseen trends of electromigration procedures applied to chiral analysis of contaminants.     

Tentoxin as a scaffold for drug discovery. Total solid-phase synthesis of tentoxin and a library of analogues

[reaction: see text] A solid-phase method for the synthesis of tentoxin has been developed. Two key steps-dehydration and N-alkylation-are carried out while the peptide is anchored to the resin. The method, which has been validated by the preparation of a library of tentoxin analogues, should be applicable to the generation of further libraries that have the tentoxin scaffold structure, as well as other structures containing N-alkylated didehydroamino acids.