Iodobenzene-catalysed iodolactonisation using sodium perborate monohydrate as oxidant

A convenient approach has been developed for iodolactonisation using iodobenzene as catalyst. The active reagent was generated in situ with tetra-n-butylammonium iodide (TBAI) and hypervalent iodine reagent, diacetoxyiodobenzene (PIDA). PIDA, in turn, was generated in situ using a catalytic amount of iodobenzene with sodium perborate monohydrate as the stoichiometric oxidant. A variety of olefinic acids including δ-pentenoic acids, δ-pentynoic acids and δ-hexynoic acid gave high yields of lactones using this methodology.     

锰卟啉一次氯酸钠模拟体系中由芳醛制备相应羧酸

前文报道了在金属卟啉-次氯酸钠模拟体系中氧化苯甲醛时,金属卟啉结构与其催化性能的关系,结果表明:四(2.6-二氯)苯基卟啉合锰是稳定性能最好及活性较高的催化剂。本文进一步报道各种因素对反应的影响,并在此基础上提出了由芳醛合成相应羧酸的新方法。     

The determination of hydroxide and carbonate in concentrated sodium chloride solutions

A computer method for the determination of carbonate and hydroxide in concentrated (2.89 M) sodium chloride solutions is described. The method is based on multiparametric curve-fitting and can also be applied to salts of dibasic acids with unknown equilibrium constants. The systematic error is not more than 1%. The titration and calculation takes less than 20 min.     

TBAI‐Catalyzed/Water‐Assisted Double C−S Bond Formations: An Efficient Approach to Sulfides through Metal‐Free Three‐Component Reactions

An aqueous catalytic method for double C?S bond formations that involves alcohol derivatives, organic halides, and sodium thiosulfate has been developed. A diverse range of functionalized sulfides, including pharmaceutical and biological derivatives, can be obtained in an efficient and eco‐friendly manner under air. The mechanistic studies revealed that this tetrabutylammonium‐iodide‐catalyzed/water‐assisted reaction generated a mercaptan species as the key intermediate.     

Indirect fluorometric determination of diclofenac sodium.

A simple and easy method of analysis for diclofenac sodium is reported. A spectrofluorometric method for the microdetermination of diclofenac sodium has been developed through its reaction with cerium(IV) in an acidic solution and measurement of the fluorescence of the Ce(III) ions produced. Under the optimum experimental conditions for the oxidation reaction, 1.0 M H2SO4 with 90 min of heating time (100 degrees C), the range of application is 124.3-600 ng mL(-1) and the limit of detection is 72.7 ng mL(-1). The proposed method was applied to the determination of diclofenac sodium in pharmaceutical tablets. The results of the analysis show a good agreement with those obtained by the official USP 27 HPLC method.     

Quantum chemical and vibrational investigation of sodium exchanged gamma-alumina surfaces

The sodium cation is well known as an efficient poison of gamma-alumina surface acidity. This poisoning effect has been revealed both by characterization methods and catalytic tests. In this work, we propose an accurate model of sodium exchanged gamma-alumina surfaces. On realistic models of hydroxylated gamma-alumina surfaces, the location of sodium cation is determined by the use of density functional theory (DFT) methods. For the (100) and (110) surfaces of gamma-alumina, the sodium cation is found in a solvated state within an inner solvation sphere complex. Its coordination sphere is constituted by O-mu(2), O-mu(3) and HO-mu(1) surface groups. The stretching frequency of these HO-mu(1) groups is shifted, leading to the appearance of a new band predicted and observed at about 3754 cm(-1) on the IR spectrum.     

高效液相色谱法测定铝酸钠溶液中的有机酸

建立了铝酸钠溶液中有机酸的高效液相色谱测定方法。铝酸钠溶液样品经简单处理后,在Kromasil C18色谱柱上,以KH2PO4-H3PO4-甲醇-水为多元流动相,等度洗脱,在10 min内可完成草酸、酒石酸、乙酸、丁二酸、丁烯二酸和戊二酸等有机酸的分离测定。方法线性关系良好（r=0.9952-0.9999）,样品加标回收率在80.2%-127.6%之间,相对标准偏差均在6.9%以下。     

A mild halogenation of pyrazoles using sodium halide salts and Oxone

A mild, inexpensive, and operationally simple pyrazole halogenation method utilizing Oxone and sodium halide salts is reported. This work documents 17 examples of alkyl, aryl, allyl, and benzyl substituted 4-chloro and 4-bromopyrazoles, obtained in up to 93% yield. Reactions are performed in water under ambient conditions and generation of organic byproducts is avoided.     

Conjugate addition of sodium methanesulfinate to vinyl pyridines and diazines for the synthesis of aliphatic sulfones

A convenient method to introduce a sulfone group to pyridines and diazines is described. This efficient method involves the conjugate addition of sodium methanesulfinate to vinyl heterocycles. This process tolerates a wide variety of functional groups and is performed in the presence of acetic or trifluoroacetic acid. A one-pot, two-step synthesis of sulfones starting from the corresponding heteroaryl halide is also described.     

Cross-coupling of organoboronic acids and sulfinate salts using catalytic copper(II) acetate and 1,10-phenanthroline: synthesis of aryl and alkenylsulfones

A mild method for the preparation of aryl and alkenylsulfones from the cross-coupling reaction of organoboronic acids and sodium sulfinate salts is described. Optimized conditions utilize a catalytic amount of copper(II) acetate monohydrate with 1,10-phenanthroline as ligand in the presence of 4 Å molecular sieves. A co-solvent mixture of dichloromethane/DMSO was used, with reactions occurring at 40 °C under an atmosphere of oxygen. Reaction at room temperature also yields sulfone product, but in lower yields. The method tolerates a variety of substituents on the organoboronic acid, including amide, aldehyde, halide and nitro functionalities, as well as ortho-substituents. In general, the reaction is found to be less efficient using arylboronic acids bearing electron-withdrawing substituents, or using aryltrifluoroborate salts.     

A practical multigram-scale method for the green synthesis of 5-substituted-1H-tetrazoles in deep eutectic solvent

A series of 5-substituted-1H-tetrazoles have been efficiently synthesized in moderate to excellent yields (68–90%) under mild reaction conditions by combining aryl aldehydes, hydroxylamine hydrochloride with sodium azide in the presence of catalytic amount of Cu(OAc)₂ in deep eutectic solvent (DES). The new synthetic method has many advantages, such as high conversion, green reaction medium, easy work-up, low cost, and environment friendly.     

An expedient esterification of aromatic carboxylic acids using sodium bromate and sodium hydrogen sulfite

Treatment of aromatic carboxylic acids and substituted toluenes with a mixture of sodium bromate and sodium hydrogen sulfite in a two-phase system gave the corresponding esters in good yield. The intermediate α-brominated toluene was formed by the in situ generated hypobromous acid. The α-bromotoluene underwent an intermolecular nucleophilic substitution reaction with aromatic carboxylic acids present in the reaction mixture to afford the corresponding esters.     

Heterogeneous gold catalysts for efficient access to functionalized lactones

A novel class of heterogeneous gold catalysts supported on zeolite beta-NH4+ was prepared by the deposition-precipitation method. This new class of catalyst showed interesting catalytic activities for the intramolecular cycloisomerization of gamma-acetylenic carboxylic acids leading to functionalized gamma-alkylidene gamma-butyrolactones. Analysis of the supported gold species with in situ X-ray photoelectron spectroscopy (in situ XPS) suggests that cationic Au (possibly AuIII) can play an important role in such reactions. The high discrepancy in catalyst stability in favor of the Au supported on the zeolite system over bulk Au2O3 is explained by 1) the size of the particles and 2) the reversibility of the redox deactivating process (AuIII-->AuI) in the presence of oxygen for the supported system. The efficiency of this system allowed reaction under mild heterogeneous conditions. The potential for catalyst recycling was also highlighted.     

Determination of diclofenac sodium in commercial pharmaceutical formulations and human control serum using a kinetic-spectrophotometric method

A kinetic method for the determination of micro quantities of diclofenac sodium (DS) is described in this paper. The method is based on a ligand-exchange reaction. The reaction was followed spectrophotometrically by monitoring the rate of appearance of the cobalt diclofenac complex at 376 nm. The optimum operating conditions regarding reagent concentrations and temperature were established. The optimized conditions yielded a theoretical detection limit of 1.29 microg ml(-1) based on the 3S(b) criterion. The interference effects of certain drugs, foreign ions and amino acids upon the reaction rate were studied in order to assess the selectivity of the method. The developed procedure was successfully applied to the rapid determination of diclofenac sodium in commercial pharmaceutical preparations and human control serum. The unique features of this procedure are that determination can be carried out at room temperature and the analysis time is short. The newly developed method is simple, inexpensive, and efficient for use in the analysis of a large number of samples.     

New approach to the synthesis of 2,3-substituted γ-aminobutyric acids and their derivatives

A new approach to the synthesis of 2,3-substituted γ-aminobutyric acids is proposed. This method consists of the selective catalytic reduction of substituted 3-cyanopropanoic acid esters, which are generated in high yield in the reaction of disubstituted cyclopropenes with sodium cyanide in the corresponding alcohol.     

Transformation of Carbon Dioxide with Homogeneous Transition‐Metal Catalysts: A Molecular Solution to a Global Challenge?

A plethora of methods have been developed over the years so that carbon dioxide can be used as a reactant in organic synthesis. Given the abundance of this compound, its utilization in synthetic chemistry, particularly on an industrial scale, is still at a rather low level. In the last 35 years, considerable research has been performed to find catalytic routes to transform CO(2) into carboxylic acids, esters, lactones, and polymers in an economic way. This Review presents an overview of the available homogeneous catalytic routes that use carbon dioxide as a C(1) carbon source for the synthesis of industrial products as well as fine chemicals.     

Equilibrium saturation chromatographic method for studying the binding of ligands to human serum albumin by high-performance liquid chromatography. Influence of fatty acids and sodium dodecyl sulphate on warfarin-human serum albumin binding

A size exclusion chromatographic method for studying ligand-macromolecule binding parameters is described. This equilibrium saturation method allows the determination of the concentrations of constituents in equilibrium and is specially useful for characterizing ligand--protein binding under conditions that can be compared with physiological conditions. The method has been used for measuring warfarin--human serum albumin (HSA) binding and for studying the influence of free fatty acids (FFA) and sodium dodecyl sulphate on warfarin--HSA binding. Some comparisons with the Hummel and Dreyer method are given. The influence of the FFA is strongly dependent on their chain length, with an inversion of the effect for a 10-carbon chain.     

‘One-flask’ transformation of isocyanates and isothiocyanates to guanidines hydrochloride by using sodium bis(trimethylsilyl)amide

A ‘one-flask’ synthesis of guanidines was developed by reacting isocyanates and isothiocyanates with sodium bis(trimethylsilyl)amide followed by addition of primary or secondary amines with a catalytic amount of AlCl₃. The desired guanidines were obtained in good yields and the reaction was applicable to aliphatic and aromatic substrates. A plausible mechanism was proposed through the generation of cyanamide anion from isocyanates or isothiocyanates with sodium bis(trimethylsilyl)amide. Addition of amines and catalytic amount of AlCl₃ smoothly converted the cyanamides to the desired guanidines.     

Synthesis of water-soluble lithium,sodium, potassium,and cesium salts of (E)-2-[4-methoxy(3,4-dimethoxy)-benzylideneamino]-2-alkyl(aralkyl)acetic acids

A convenient method of preparative synthesis of water-soluble lithium, sodium, potassium, and cesium salts of (E)-2-[4-methoxy(3,4-dimethoxy)benzylideneamino]-2-alkyl(aralkyl)acetic acids via reaction of anisic or veratric aldehyde with natural amino acids (glycine, L-valine, L-leucine, L-isoleucine or Ltryptophan) in the presence of lithium hydride or carbonates of sodium, potassium, or cesium in boiling methanol was developed.     

Titration of cyanide and hexacyanoferrate(II) with silver nitrate-II Determination of sodium cyanide and sodium hexacyanoferrate(II) in a complexing agent

Cyanide and hexacyanoferrate(II) can be titrated with silver nitrate in the presence of a complexing agent masked with a suitable metal ion. A method for determination of sodium cyanide and sodium hexacyanoferrate(II) in the presence of sodium nitrilotriacetate masked with magnesium ions is given as an example.