Determination of fat-soluble vitamins in yogurt by HPLC with electrochemical detection

A method employing HPLC with electrochemical detection for the rapid and simultaneous determination of vitamins A, D(3) and E is described. The method uses a C-18 reverse phase column and 2.5 mM HAcO-NaAcO in methanol-water (99:1, v/v) solution as the mobile phase. The compounds are quantified using amperometric detection with a glassy carbon electrode at a potential of + 1300 mV (vs. Ag/AgCl) and the results are compared with those obtained using UV detection at a wavelength of 280 nm. The method was successfully applied to the analysis of vitamins A, D(3) and E in yogurt samples. After saponification, fat-soluble vitamins were extracted and the methanolic solution of the extracts was injected directly into the chromatographic system, avoiding the clean-up step which is necessary when no electrochemical detection is used. Good recovery percentages were obtained.     

Partial filling multiple injection affinity capillary electrophoresis (PFMIACE) to estimate binding constants of receptors to ligands

Partial filling multiple injection affinity capillary electrophoresis (PFMIACE) is used to determine binding constants between vancomycin (Van) from Streptomyces orientalis, teicoplanin (Teic) from Actinoplanes teicomyceticus and ristocetin (Rist) from Nocardia lurida to d-Ala-d-Ala terminus peptides and carbonic anhydrase B (CAB, E.C.4.2.1.1) to arylsulfonamides. Two variations of PFMIACE are described herein. In the first technique, the capillary is partially filled with ligand at increasing concentrations, a non-interacting standard, three or four separate plugs of receptor each separated by small plugs of buffer, a plug containing a second non-interacting standard, and then electrophoresed in buffer. Upon continued electrophoresis, equilibrium is established between the ligand and receptors causing a shift in the migration time of the receptors with respect to the non-interacting standards. This change in migration time is utilized for estimating multiple binding constants (K_b) for the same interaction. In the second technique, separate plugs of sample containing non-interacting standards, peptide one, buffer, and peptide two, were injected into the capillary column. The capillary is partially filled with a series of buffers containing an antibiotic at increasing concentrations and electrophoresed. Peptides migrate through the column at similar electrophoretic mobilities since their charge-to-mass ratios are approximately the same but remain as distinct zones due to the buffer plug between peptides. Upon electrophoresis, the plug of antibiotic flows into the peptide plugs affecting a shift in the migration time of the peptides with respect to the non-interacting standards occurs due to formation of the of the antibiotic-peptide complex. The shift in the migration time of the peptides upon binding to the antibiotic is used for the Scatchard analysis and measurement of a K_b. The PFMIACE technique expands the functionality and potential of ACE as an analytical tool to examine receptor-ligand interactions. In PFMIACE, a smaller amount of sample is required in the assay compared to both conventional ACE and MIACE. Furthermore, a wide array of data is obtained from a single experiment, thus, expediting the assay of biological species.     

An expedient one-pot entry to catecholestrogens and other catechol compounds via IBX-mediated phenolic oxygenation

A one-pot procedure for the preparation of catecholestrogens in over 90% yield is reported, involving oxygenation of 17β-estradiol or estrone with o-iodoxybenzoic acid (IBX) followed by reduction with methanolic NaBH₄. The procedure, which was extended to the o-hydroxylation of a number of representative phenols in good-to-high yields, expands significantly the scope of phenolic oxidation mediated by IBX.     

Naphtho[1′,2′:5,6]pyrano[2,3–6][1,5]benzodiazepine Derivatives

The reaction of 3-(dimethylamino)-1-oxo-1H-naphtho[2,1-b]pyran-2-carbaldehyde (Ia) with o-phenylenediamines or N-monosubstituted o-phenylenediamines in refluxing glacial acetic acid afforded the corresponding naphtho[1′,2′:5,6]pyrano[2,3-b][1,5]benzodiazepin-15-(8H)ones V in very good yields. A similar result was achieved when the reaction was carried out in refluxing pyridine, using N-monosubstituted o-phenylenediamine hydrochlorides. The isolation of a significant intermediate as well as the synthesis through a different univocal pathway confirmed the structure of the compounds V. Moreover the reaction of Ia with N-monosubstituted o-phenylenediamines in refluxing pyridine generally afforded only low yields of compounds V, sometimes together with naphtho[1′,2′:5,6]pyrano[2,3-b][1,5]benzodiazepin-15-(13H)ones VII, isomers of V.     

The static dielectric constant of solutions of water inn-alcohols at 15, 25, 35, and 45°C

Dielectric constants (measured at 1 MHz) are reported for solutions of water (concentration range 0 to 0.2 mole fraction) in 1-propanol at 25°C, and in 1-butanol, 1-pentanol, and 1-hexanol at 15, 25, 35, and 45°C. These results, together with literature values for solutions of water in methanol, ethanol, 1-heptanol, and 1-octanol, show that water interacts with alcohols in at least two ways: (1) it can participate in the formation of dynamic hydrogen-bonded chains, thereby raising the polarizability; (2) it can form relatively stable structures such as H₂O(ROH)₄ which have zero net dipole moment and consequently diminish volume polarizability. For C _n H _2n+1 OH alcohols,n≥4, most of the initially added water forms complexes: consequently, addition of water to these alcohols lowers the dielectric constant.     

Co-ordination chemistry of amino pendant arm derivatives of 1,4,7-triazacyclononane

The binding properties of 1,4,7-triazacyclononane ([9]aneN3) to metal cations can be adapted through sequential functionalisation of the secondary amines with aminoethyl or aminopropyl pendant arms to generate ligands with increasing numbers of donor atoms. The new amino functionalised pendant arm derivative of 1,4,7-triazacyclononane ([9]aneN3), L1, has been synthesised and its salt [H2L1]Cl2 characterised by X-ray diffraction. The protonation constants of the ligands L1-L4 having one, two or three aminoethyl or three aminopropyl pendant arms, respectively, on the [9]aneN3 framework, and the thermodynamic stabilities of their mononuclear complexes with CuII and ZnII have been investigated by potentiometric measurements in aqueous solutions. In order to discern the protonation sites of ligands L1-L4, 1H NMR spectroscopic studies were performed in D2O as a function of pH. While the stability constants of the CuII complexes increase on going from L1 to L2 and then decrease on going from L2 to L3 and L4, those for ZnII complexes increase from L1 to L3 and then decrease for L4. The X-ray crystal structures of the complexes [Cu(L1)(Br)]Br, [Zn(L1)(NO3)]NO3, [Cu(L2)](ClO4)2, [Ni(L2)(MeCN)](BF4)2, [Zn(L4)](BF4)2.MeCN and [Mn(L4)](NO3)2.1/2H2O have been determined. In both [Cu(L1)(Br)]Br and [Zn(L1)(NO3)]NO3 the metal ion is five co-ordinate and bound by four N-donors of the macrocyclic ligand and by one of the two counter-anions. The crystal structures of [Cu(L2)](ClO4)2 and [Ni(L2)(MeCN)](BF4)2 show the metal centre in slightly distorted square-based pyramidal and octahedral geometry, respectively, with a MeCN molecule completing the co-ordination sphere around NiII in the latter. In both [Zn(L4)](BF4)2.MeCN and [Mn(L4)](NO3)2.1/2H2O the metal ion is bound by all six N-donors of the macrocyclic ligand in a distorted octahedral geometry. Interestingly, and in agreement with the solution studies and with the marked preference of CuII to assume a square-based pyramidal geometry with these types of ligands, the reaction of L4 with one equivalent of Cu(BF4)2.4H2O in MeOH at room temperature yields a square-based pyramidal five co-ordinate CuII complex [Cu(L6)](BF4)2 where one of the three propylamino pendant arms of the starting ligand has been cleaved to give L6.     

Diheteroarylmethanes. 6.(1) Probing the Electron-Withdrawing Rank of Heteroaryl Groups by Conformational Studies of Push-Pull Ethylenes. Isolation of NH-Enamine Tautomers of alpha,alpha-Diheteroarylacetaldehydes (Heteroaryl = 2-Benzoxazolyl, 2-Benzothiazolyl)

Enamines and enol ethers substituted in the beta position by the 2-benzoxazolyl and 2-benzothiazolyl group have been obtained by condensing dimethylformamide dimethyl acetal and ethyl orthoformate, respectively, with bis(2-benzoxazolyl)methane and bis(2-benzothiazolyl)methane. A dynamic NMR and semiempirical (PM3) investigation on rotational energy barriers has been carried out in order to rank the electron-withdrawing capacity of the heterocyclic rings. The NMR-based evaluation of the energy barriers corresponding to the rotation along the enaminic double bond has shown that the pi-electron-withdrawing power of benzothiazole is larger than that of benzoxazole, in full accord with previously obtained charge demand values based on (13)C and (15)N pi-charge/shift relationships. The NMR and the computational approaches have led to consistent results. The X-ray crystal structure of alpha,alpha-bis(2-benzothiazolyl)-beta-(dimethylamino)ethene shows that only one heteroaryl ring is coplanar with the enaminic double bond, while the second one is twisted by 73 degrees relative to such a plane. Moreover, in this case calculations closely reproduce the experimental results. In the calculated transition states corresponding to the rotational process along the enamine double bond, the two heteroaryl groups become coplanar and conjugation develops between the enaminic nitrogen electron pool and both heterocycles. The lower rotational barrier observed in the case of the 2-benzothiazolyl derivatives, with respect to the 2-benzoxazolyl derivatives, is therefore a direct consequence of the higher electron-withdrawing power of the former group. Furthermore, a stabilizing intramolecular nonbonded S.S interaction in the rotational transition state of the benzothiazolyl derivatives is evidenced by the calculations. An unprecedented isolation of the NH-enamine tautomer involving the benzoxazolyl and benzothiazolyl ring in alpha,alpha-diheteroacetaldehydes has been performed, confirming these heterocycles as strong electron-withdrawing substituents.     

Global minima of (C60)nCa, (C60)nF and (C60)nI clusters

Likely candidates for the lowest potential energy minima of (C₆₀)_nCa²⁺, (C₆₀)_nF⁻ and (C₆₀)_nI⁻ clusters are located using basin-hopping global optimisation. In each case, the potential energy surface is constructed using the Girifalco form for the C₆₀ intermolecular interaction, an averaged Lennard–Jones C₆₀–ion interaction, and a polarisation potential, which depends on the first few non-vanishing C₆₀ multipole polarisabilities. We find that the ions generally occupy the interstitial sites of a (C₆₀)_n cluster, the coordination shell being tetrahedral for Ca²⁺ and F⁻. The I⁻ ion has an octahedral coordination shell in the global minimum for (C₆₀)₆I⁻, however for 12  n  8 the preferred coordination geometry is trigonal prismatic.     

Magnetic susceptibility measurement with a Dupont's thermogravimetric analyser

The adaptation of a Du Pont Thermogravimetric Analyser for the measurement of magnetic susceptibility as a function of temperature in the range – 80 °C to 300 °C is described.

---

Zusammenfassung Die Adaptation des Du Pont's Thermogravimetric Analyzer zur Messung der magnetischen Suszeptibilität in Abhängigkeit von der Temperatur im Bereich von – 80° bis 300 °C wird mitgeteilt.

---

–80°–300 °.

     

Self-assembly of electron donor-acceptor dyads into ordered architectures in two and three dimensions: surface patterning and columnar "double cables"

We report the synthesis and characterization of covalent dyads and multiads of electron acceptors (A) and donors (D), with the purpose of exploiting their nanophase separation behavior toward (a) two-dimensional (2D) surface patterning with well-defined integrated arrays of dissimilar molecular electronic features and (b) bulk self-assembly to noncovalent columnar versions of the so-called "double cable" systems, the likes of which could eventually provide side-by-side percolation pathways for electrons and holes in solar cells. Soluble, alkylated hexa-peri-hexabenzocoronenes (HBCs) bearing tethered anthraquinones (AQs) are shown by scanning tunneling microscopy (STM) to self-assemble at the solution-graphite interface into either defect-rich polycrystalline monolayers or extended 2D crystalline domains, depending on the number of tethered AQs. In the bulk, the thermal stability of the room-temperature HBC columnar phase is increased, which is attributed to the desired nanotriphase separation of HBC columns, insulating alkyl sheaths, and AQ units. Homeotropic alignment (columns normal to surfaces), predicted to be ideal for potential exploitation of such "double cables" in photovoltaic devices, is demonstrated.