低电阻测量设计实验中电位差计指针不稳的解决方法

本文分析了J33Q型电位差计在实验中指针不稳的原因,并提出了解决的办法。     

在重力场和磁场影响下自旋刚性航天器的周期运动

考虑重力场和磁场对轴对称航天器本体的影响，研究其质心在圆形轨道上的运动,通过降低系统的运动方程数，并将它变成为一个带电粒子在电磁场作用下的平面运动．确认系统运动是稳定的，并通过Liapunov全纯积分定理，构建其近似的周期运动.     

Design and Fabrication of 1.06 μm Resonant-Cavity Enhanced Reflective Modulator with GaInAs/GaAs Quantum Wells

A resonant-cavity enhanced reflective optical modulator is designed and fabricated, with three groups of three highly strained InGaAs/GaAs quantum wells in the cavity, for low voltage and high contrast ratio operation. The quantum wells are positioned in antinodes of the optical standing wave. The modulator is grown in a single growth step in an molecular beam epitaxy system, using GaAs/AlAs distributed Bragg reflectors as both the top and bottom mirrors. Results show that the reflection device has a modulation extinction of 3 dB at -4.5 V bias.     

Design of Two-Dimensional Photonic Crystal Edge Emitting Laser for Photonic Integrated Circuits

An edge emitting laser based on two-dimensional photonic crystal slabs is proposed. The device consists of a square lattice microcavity, which is composed of two structures with the same period but different radius of air-holes, and a waveguide. In the cavity, laser resonance in the inner structure benefits from not only the anomalous dispersion characteristic of the first band-edge at the M point in the first Brillouin-zone but also zero photon states in the outer structure. A line defect waveguide is introduced in the outer structure for extracting photons from the inner cavity. Three-dimensional finite-difference time-domain simulations apparently show the in-plane laser output from the waveguide. The microcavity has an effective mode volume of about 3.2（λ/nslab）^3 for oscillation mode and the quality factor of the device including line defect waveguide is estimated to be as high as 1300.     

N-(取代)对三氟甲基苯基-1,3,5-三取代吡唑-4-酰胺衍生物的合成与生物活性

设计合成10个未见文献报道的N-对三氟甲基苯基-1,3,5-三取代吡唑-4-酰胺类化合物, 其结构经元素分析, ¹H NMR, IR 确证. 初步生物活性测试结果表明, 部分化合物对水稻纹枯病、小麦赤霉病、辣椒枯萎病和马铃薯晚疫病有一定的杀菌活性.     

海螵蛸入药部分和废弃部分8种无机元素分析

为合理开发利用海螵蛸 ,用原子吸收分光光度法测定了海螵蛸中入药部分和废弃部分中8种人体必需无机元素含量。结果表明 ,入药部分和废弃部分中钙含量丰富 ,分别达到 742 1 3× 1 0 - 3和 65 9 76× 1 0 - 3。入药部分铜、铁含量较废弃部分高 ,分别为 9 41× 1 0 - 6 、 91 86× 1 0 - 6 和2 3 5× 1 0 - 6 、 2 5 7× 1 0 - 6 。废弃部分含锌丰富 ,为 3 5 3 62× 1 0 - 6 ,数倍于入药部分 64 65× 1 0 - 6 。可见海螵蛸入药部分和废弃部分均具有良好的开发前景     

CO在Pt/Al2O3催化剂上的TPD和TPSR

用热导-气相色谱(TC-GC)同步跟踪法研究了CO在Pt/Al_2O_3上的TPD,观察到CO的TC-TPD谱为一条温度从331-776K的宽带。跟踪谱带上各点的化学组成,发现宽带系由两个CO和两个CO_2的脱附峰叠加成的。当样品经高温氢处理后,观察到CO的吸附量、TPD和TPSR谱都发生了显著的变化,这些变化与稳态下CO选择氧化的转换频率有对应关系。高温氢处理对CO的加氢反应性则无明显影响。     

钴-5,10,15,20-四(3-甲氧基-4-羟基苯基)卟啉修饰玻碳电极的L-抗坏血酸化学传感器研究

将水合 5,10,15,20-四-(3-甲氧基-4-羟基苯基)钴卟啉(CoTMHPP)修饰在玻碳电极表面,制成CoTMHPP修饰电极.电极稳定性好且灵敏度高,对抗坏血酸有良好的电催化氧化作用,测定线性响应范围为1.0×10(-5)～1.0×10(-2)mol/L,响应时间小于12s.本文研究了电极的性质和应用,并用于药物中抗坏血酸的测定,其测定结果与碘量法一致.     

YAG∶Nd中Pr,Sm,Dy杂质对其光谱的影响

采用溶胶 -凝胶法合成了YAG∶Nd ,Re(Re =Pr,Sm ,Dy)系列化合物 ,研究了它们的光谱性质 .结果表明 :Pr3 + ,Sm3 + ,Dy3 + 对YAG基质中Nd3 + 的发光具有猝灭作用 ,属于有害杂质 ,在激光晶体原料中必须除去