新铸光谱标样的制备和定值分析结果

本文叙述了新铸铝光谱标样的制备过程，制备出的标样具有工艺先进，化学成分均匀，定值准确及校准曲线啮合系数高等特点。通过试用分析，结果与化学仲裁分析结果相符，很好地满足了光谱分析铸造铝合金化学成分对标样的需求。     

瓶颈开口角对二维颗粒流的影响

实验研究了平面传送带上颗粒流的特性，主要包括传送带出口处开口宽度以及瓶颈开口角度对颗粒流的影响.实验结果发现，改变瓶颈开口角度θ，当θ大于15°时，颗粒流量Q随着cosθ呈线性变化.同时，颗粒流量Q与传送带速度v以及开口大小R也密切相关，而在θ小于15°时，颗粒流量Q基本不随开口角度变化.     

丝阵Z箍缩实验1维X光辐射功率分布

 在Angara-5-1联合实验中，利用条纹像机和光纤阵列实现时间分辨和1维空间分辨，得到了丝阵条纹像，观察到丝阵负载箍缩区X光辐射的1维轴向空间分布信息随时间的演化过程，考察了内爆的同步性和均匀性。通过对比不同结构负载内爆等离子体X光1维时空分布信息，发现由于内层等离子体对磁流体瑞利-泰勒不稳定性的抑制作用，(40+20)根双层钨丝阵比60根单层钨丝阵的内爆轴向同步性好，产生的X光辐射功率高；由于负载存在弯曲、断丝、扭曲等现象，(60+30)根双层钨丝阵比90根单层钨丝阵的轴向同步优势不明显；轴向同步性好与辐射功率高之间存在相关性；辐射波形前沿较快时，X光功率较高。     

强光一号装置单氘丝中子发射实验研究

 介绍了利用飞行时间技术测量Z箍缩装置单氘丝中子发射。实验发现，Z箍缩中子发射过程中,伴随产生很强的硬X射线，利用铝丝阵产生硬X射线的实验，建立较好的硬X射线屏蔽,大大减弱了它的辐射强度。所采用的双闪烁探测器中子探测系统，进行了3个发次的单氘丝负载实验，确认产生了聚变氘氘中子。4172发次实验测量结果表明，中子产额1.5×10⁹，中子能量为(2.45±0.26) MeV。实验结合分幅照相数据分析认为，峰电流和负载未能很好匹配，等离子体存在不稳定现象。     

Isoscaling in Statistical Sequential Decay Model

A sequential decay model is used to study isoscaling, i.e. the factorization of the isotope ratios from sources of different isospins and sizes over a broad range of excitation energies, into fugacity terms of proton and neutron number, R21（N, Z） = Y2（ N, Z）/Y1（ N, Z） = Cexp（αN -βZ）. It is found that the isoscaling parameters α and β have a strong dependence on the isospin difference of equilibrated source and excitation energy, no significant influence of the source size on α andβ has been observed. It is found that α and β decrease with the excitation energy and are linear functions of 1/T and △（Z/A）2 or△（N/A）2 of the sources. Symmetry energy coefticient Gsym is constrained from the relationship of a and source △（Z/A）2, /3 and source △（N/A）2.     

First-Principles Study of Electronic Structure of the Laves Phase ZrFe2

We perform the ab initio calculation for obtaining the density of states and magnetic properties of ZrFe2 Laves phase compound based on the method of augmented plane waves plus local orbital The results indicate that the ferromagnetic state is more stable than the paramagnetic one, but with a slightly larger volume. The 3d - 4d exchange interactions between Fe and Zr electrons lead to the antiparallel coupling for Fe 3d and Zr 4d states, which is responsible for the ferrimagnetic ordering of the compound. The resulting magnetic moment of about 1.98μB for Fe is spatially localized near the Fe site, while around Zr a small but extended negative spin states causes a moment of about -0.44 μB. Moreover, the resulting magnetic moments with the generalized gradient approximation are more consistent with experimental values than that of the local-spin density approximation.     

Electrochemical Deposition and Properties of ZnTe Nanowire Array

Pulsed electrodeposited technique is applied to fabricate ZnTe nanowire arrays with different diameters into the anodic alumina membrane in citric acid solution. The x-ray powder diffraction, scanning electron microscopy and transmission electron microscopy indicate that the high ordered, uniform and single-crystalline nanowires have been fabricated. The optical absorption spectra of the nanowire array show that the optical absorption band edge of the ZnTe nanowire array exhibit a blue shift compared with that of bulk ZnTe, and the nonlinear current-voltage characteristic is observed.     

Flat Supercontinuum Generation at 1550 nm in a Dispersion-Flattened Microstructure Fibre Using Picosecond Pulse

The generation of a flat supercontinuum of over 80nm in the 1550nm region by injecting 1.6ps 10 GHz repetition rate optical pulses into an 80-m-long dispersion-flattened microstructure fibre is demonstrated. The fibre has small normal dispersion with a variation smaller than 1.5 （ps·nm^-1·km^-1） between 1500 and 1650nm. The generated supercontinuum ranging from 1513 to 1591 nm has the flatness of ±1.5 dB and it is not so flat in the range of several nanometres around the pump wavelength 1552nm. Numerical simulation is also used to study the effect of optical loss, fibre parameters and pumping conditions on supercontinuum generation in the dispersion-flattened microstructure fibre, and can be used for further optimization to generate flat broad spectra.     

人体足跖骨的力学分析及其临床应用

本文研制新型的人体足底负荷测定装置,确定正常步态下的正常足和病理足的负荷谱.在此基础上,进行了人体足跖骨力学模型的理论分析计算和跖骨应力的实验测定,综合分析结果在足外科和矫、整形外科临床中得到了实际应用.     

教会学生算利息

为了适应商品经济的需要，初中数学教材中安排了单利计算利息和税收的内容。