配方(下)

５　求抛物线的顶点、焦点、焦距和准线设ｌ是一条确定的直线,Ｆ是一个确定的点,距离ｌ和Ｆ等远的点的轨迹叫抛物线,为了描述抛物线,在平面上建立坐标系,设Ｆ点到直线ｌ的距离等于ｐ;再设Ｆ点的坐标是（０,１２ｐ）,直线ｌ的方程是ｙ＝－１２ｐ．那么抛物线上一点（ｘ,ｙ）就应该满足条件（ｘ－０）２＋（ｙ－ｐ２）２＝（ｙ＋ｐ２）．化简上式,得　ｙ＝１２ｐｘ２．（１３）（１３）就叫抛物线的方程,ｌ叫准线,Ｆ叫它的焦点,ｐ叫它的焦距,直线ｘ＝０是它的对称轴,而对称轴和抛物线的交点（０,０）叫它的顶点;图３　抛物线…     

酶法测定葡萄糖

利用已糖激酶、６－磷酸葡萄糖脱氢酶偶联而催化葡萄糖反应的原理,通过还原型烟酰胺腺嘌呤二核苷酸磷酸的吸光度变化率得出 酶促反应速度,采用标准曲线法了葡萄糖的含量。检出限为７×１０＾－７ｍｏｌ／Ｌ。     

钨掺杂BiVO4光阳极降解环丙沙星的表面态行为

采用简单浸渍的方法对BiVO₄光阳极进行表面钨(W)掺杂,以环丙沙星(CIP)为药品和个人护理产品(PPCPs)模型污染物,研究了W掺杂BiVO₄光阳极降解CIP的表面态行为。结果表明,低浓度W掺杂对BiVO₄光阳极的晶体结构、表面形貌和光吸收性能没有显著影响。但W掺杂取代了BiVO₄光阳极表面的V⁵⁺,能抑制BiVO₄光阳极表面V⁵⁺/V⁴⁺还原过程,减少复合中心表面态,同时引入更多氧空穴,增加活性位点表面态。CIP的降解反应受表面活性位点控制。表面W掺杂能有效促进CIP降解的电荷转移,提高BiVO₄光阳极光电催化降解性能。     

能力验证及其评价

The definitions, purposes and uses of proficiency testing and interlaboratory comparison were expounded in detail. Main types of proficiency testing were illustrated. Special emphases were made on the organization, practice and evaluation of the planning of proficiency testing. Related policies about proficiency testing given by the China National Accreditation Board for Laboratories （CNAL） were also briefly introduced.     

Sn自溶剂含量对Al掺杂Ⅷ型Sn基单晶笼合物电传输特性的影响

通过Sn自熔剂法制备了Al掺杂Ⅷ型Sn基单晶笼合物Ba8Ga10Al6Snx(x=40,50,60;Sn40,Sn50,Sn60),并研究Ba8Ga10Al6Snx单晶笼合物的结构和电传输特性对自熔剂Sn初始含量的依赖性.结果表明,Al的实际含量随Sn自熔剂含量的增加而基本保持不变,说明Sn的起始含量对Al在该笼合物中固溶度的影响较小;室温下Sn60样品的载流子浓度较高,这可能是因Al在笼合物Ga8 Ga16Sn30中的占位不同而导致费米能级附近能带色散关系发生变化所引起;另一方面,在300～600 K的温度范围内,获得较高功率因子的是Sn初始含量为50的样品,在488 K处获得最大值1.82×10-3 W·m-1·K-2;获得较低功率因子的是Sn初始含量为40的样品,而功率因子较低主要是由于该样品电导率较低.     

差动光程差倍增法测量微小位移

基于差动光程差倍增法将微小位移转化为多倍光程差,通过电桥光电转换电路,得到干涉条纹数的变化.采用差动干涉方法,提高了光程改变量与位移量的比例,使微小位移的测量精度提高到亚微米量级.     

Structural and Thermodynamic Properties of M3W3N （M=Fe,Co, Ni）

Ternary transition metal nitrides, Fe3 W3N, Coa W3N, and Nia WaN~ are studied by the use of interatomic potentials acquired from lattice inversion. The study indicates that Fe3 WaN would be more stable than the other compounds in the family of intermetallic tungsten nitrides. The investigation of phonon density of states indi- cates that the lower frequency modes are mostly excited by the metal atoms, and the higher frequency modes are mostly excited by the nitrogen atoms. A qualitative analysis is carried out with the relevant potentials for the phase stability and vibrational modes.     

Monitoring of the ducting by a ground-based GPS receiver

In this paper, we describe the estimation of low-altitude refractivity structure from simulation and real ground-based GPS delays. The vertical structure of the refractive environment is modeled using three parameters, i.e., duct height, duct thickness, and duct slope. The refractivity model is implemented with a priori constraints on the duct height, thickness, and strength, which might be derived from soundings or numerical weather-prediction models. A ray propagation model maps the refractivity structure into a replica field. Replica fields are compared with the simulation observed data using a squared-error objective function. A global search for the three environmental parameters is performed using genetic algorithm. The inversion is assessed by comparing the refractivity profiles from the radiosondes to those estimated. This technique could provide near-real-time estimation of ducting effect. The results suggest that ground-based GPS provides significant atmospheric refractivity information, despite certain fundamental limitations of ground-based measurements. Radiosondes typically are launched just a few times daily. Consequently, estimates of temporally and spatially varying refractivity that assimilate GPS delays could substantially improve over-estimates using radiosonde data alone.