9-cell TESLA超导加速腔研制中Dumb-Bells的测量与调整

为了保证9-cell超导加速腔在场的平滑度、TM010的频率以及加速器的总长度达到TESLA国际标准,必须确保每个Dumb-Bell在以上各方面达到标准要求.由于冲压、机加工以及电子束焊接等过程会引起形变,因此,必须在完成iris和加强筋的电子束焊接之后对Dumb-Bells进行微波和机械测量,并根据测量的结果对其腔形和长度等作必要的调整.北京大学已经建立了一套完整的测量和调整Dumb-Bells的装置,本文深入研究了Dumb-Bells的测量与调整的方法.     

Deuterium Clusters Fusion Induced by the Intense Femtosecond Laser Pulse

Neutrons （2.45MeV） from deuterium cluster fusion induced by the intense femtosecond （3Ors） laser pulse are experimentally demonstrated. The average neutron yield 103 per shot is obtained. It is found that the yield slightly increases with the increasing laser spot size. No neutron can be observed when the laser intensity I 〈 4.3 × 10^15 W/cm^2.     

可变参数磁压缩系统设计

北京大学30MeV超导加速器包含3个RF加速单元: 自主研发的1.5cell DC-SC(直流-超导)注入器, 经过升级的3.5cell DC-SC注入器, 以及1.3GHz 2×9cell Telsa型超导加速腔. 为充分利用该装置上高品质电子束, 计划压缩1.5cell注入器出口电子束用于产生相干THz光, 以及压缩2×9cell超导加速腔出口电子束产生红外自由电子激光. 通过理论计算及模拟计算相结合设计了一套可变参数磁压缩系统, 该系统可以同时满足两个RF加速单元后束团压缩的要求.     

Design of a low level radio frequency control system for the direct current-superconductive photocathode injector at Peking University

A digital low level radio frequency (LLRF) control system based on a high precision field-programmable gate array (FPGA) is being developed for the stable operation of the upgraded direct current-superconductive (DC-SC) photocathode injector at Peking University. The design of this LLRF control system is described, including both the hardware and the internal algorithm. Analysis of disturbances shows that the system can achieve the requirement of ±0.1% for amplitude stability and ±0.1° for phase stability. Through experiments, preliminary results are presented in the paper.     

Amplitude and phase stability studies in a DC superconducting injector

The DC superconducting injector will be used in the PKU-THz facility which consists of a DC-gun and a 3+1/2-cell superconducting cavity. The cavity must accelerate the electron beam to 5.82 MeV which is susceptible to perturbations because of its narrow bandwidth. In this paper, the sources and influences of the perturbations in the 3+1/2-cell cavity are discussed. It is shown that the control system is essential for the cavity. The design of a feedback based digital RF low level control system for the 3+1/2-cell cavity is accomplished.     

9-cell TESLA超导加速腔研制中Dumb-Bells的测量与调整

为了保证9-cell超导加速腔在场的平滑度、TM010模的频率以及加速器的总长度达到TESLA国际标准, 必须确保每个Dumb-Bell在以上各方面达到标准要求. 由于冲压、机加工以及电子束焊接等过程会引起形变, 因此, 必须在完成iris和加强筋的电子束焊接之后对Dumb-Bells进行微波和机械测量, 并根据测量的结果对其腔形和长度等作必要的调整. 北京大学已经建立了一套完整的测量和调整Dumb-Bells的装置, 本文深入研究了Dumb-Bells的测量与调整的方法.     

北京大学国产大晶粒铌材超导腔的性能研究

大晶粒铌材是射频超导领域的研究热点之一. 采用大晶粒铌材的射频超导谐振腔, 其后处理工艺可以大大简化. 北京大学对此进行了深入细致的研究, 自主研制了采用国产大晶粒铌材的射频超导腔, 对这些超导腔进行了简单的表面处理, 包括标准的化学抛光(BCP)和120℃低温烘烤处理, 未进行非常复杂的电抛光处理, 低温性能测试结果表明其低温超导性能优越, 大晶粒1.3GHz超导腔的加速梯度达到了43.5MV/m, 为我国超导加速器的国产化打下了基础.