三维动力学分析软件MSC／DYTRAN功能及其应用

简要介绍了三维动力学分析软件ＭＳＣ／ＤＹＴＲＡＮ的功能，基本特征，以及在数值计算领域如：浅滩水下爆破，弹丸高速碰撞，成型装药等问题中的应用，并给出了部分算例。     

酚醛树脂包覆氧化天然石墨作为锂离子电池负极材料

天然石墨经过浓硫酸氧化处理,酚醛树脂包覆并高温碳化后形成具有核壳结构的碳包覆氧化天然石墨复合材料.采用扫描电子显微镜(SEM),透射电子显微镜(TEM),X射线衍射(XRD),激光显微拉曼光谱(Raman)等检测技术对氧化处理以及酚醛树脂热解碳包覆前后天然石墨材料的结构与形貌进行分析与表征.结果表明,氧化处理与适量的酚醛树脂热解碳包覆有效修复了天然石墨表面的一些缺陷结构,使其表面更为光滑.电化学测试结果显示,经过氧化处理与酚醛树脂热解碳包覆后天然石墨材料电化学性能得到明显提高.酚醛树脂包覆量为9%时,复合材料表现出最好的电化学性能,其首次放电比容量为434.0mAh·g-1,40次循环后,放电比容量保持在361.6mAh·g-1,而未经处理的天然石墨放电比容量仅为332.3mAh·g-1.该改性方法有效提高了天然石墨材料的比容量,对其进一步应用具有重要意义.     

Separation work analysis of cohesive law and consistently coupled cohesive law

An appropriate coupled cohesive law for predicting the mixed mode failure is established by combining normal separation and tangential separation of surfaces in the cohesive zone model(CZM) and the cohesive element method.The Xu-Needleman exponential cohesive law with the fully shear failure mechanism is one of the most popular models.Based on the proposed consistently coupled rule/principle,the Xu-Needleman law with the fully shear failure mechanism is proved to be a non-consistently coupled cohesive la...     

过模介质O-波导的传播特性

本文详细分析了过模介质O-波导的全部模式,提出一种简单准确的模式分类法,导出了各本征模分离的特征方程,避免了直接求解复杂的特征方程。讨论了按场分布划分的三类正规模:表面模、界面模和泄漏模以及它们的传播特性,给出了相应的近似解。几个极限结果与文献十分吻合。研究表明,适当选择过模介质O-波导的材料参数和波导尺寸,它的传播特性很容易控制。     

光合色素分子吸附膜的非线性增强效应

吸附在光学表面上的细菌叶绿素和藻兰素生物分子膜.在基波(λ=1.06μm)激光作用下,观察到谐波效应.文中对藻兰素只产生三次谐波而不产生二次谐波做了分析.     

关于丢番图方程(ax~m±1)/(ax±1)=y~n与(ax~m±1)/(ax±1)=y~n+1

本文证明了方程(1.4)没有x是一个n次完全幂的整数解(a,x,y,m,n),从而推广了乐茂华的结论:方程(1.1)没有x是一个n次完全幂的整数解(x,y,m,n),并有条件的得到了方程(1.5)的全部解.     

微波法快速合成环金属铂配合物磷光发光材料

采用微波合成法合成了一系列新的含不同β-二酮的环金属铂配合物.在微波反应条件下,反应时间从32h减少到30min左右.同时,对环金属铂配合物的吸收和发射光谱、热稳定性,磷光寿命的影响进行了讨论.     

大气环境质量评价的灰色模型

大气环境是一个包含未知信息的灰色系统，根据其灰色性．运用灰色系统理论可以克服目前一些环境质量评价方法（综合指数法、概率统计法、模糊综合评判法）的局限性，使评价结果更为科学和客观。     

Simulation of Helium Behaviour in Titanium Crystals Using Molecular Dynamics

The behaviour of helium in Ti crystals at 300 K has been investigated by means of the molecular dynamics. The study is focused on the influences of He-Ti interaction on the aggregation of helium atoms in the substrate. When a Born-Mayer potential is used to describe the He-Ti interaction, the He atoms are unable to cluster with each other due to the weak bridge barrier that cannot trap the helium atoms, Whereas using a He-Ti potential that is constructed by fitting the ab initio pairwise He-Ti potential, the clustering of He atoms can be observed. The results indicate that suitable He-Ti potential plays an important role in the formation of He clusters in metals. Moreover, it is noted that the shape of the formed He cluster is irregular, and the produced defect prefers to congregating on one side of the He cluster rather than spreading symmetrically around it.     

Doping in the Mixed Layer to Achieve High Brightness and Efficiency Organic Light Emitting Devices

Doping in the mixed layer was introduced to fabricate high brightness and high efficiency organic light emitting devices.In these devices,a copper phthalocyanine(CuPc) film acts as the buffer layer,a naphthylphenybiphenyl amine (NPB) film as the hole transport layer and a tris(8-hydroxyquinolinolate) aluminium (Alq3) film as the electron transport layer.The luminescent layer consists of the mixture of NPB,Alq3( to be called the mixed layer),and an emitting dopant 5,6,11,12-petraphenylnaphthacene (rubrene),where the concentration of NPB declined and the concentration of Alq3 was increased gradually in the deposition process.Adopting this doping mixed layer,the device exhibits the maximum emission of 49300cd/m^2 at 35V and the maximum efficiency of 7.96cd/A at 10.5V,which have been improved by two times in comparison with conventional doped devices.We attribute this improvement to the effective confinement of carriers in the mixed layer,which leads to the increase of the recombination efficiency of carriers.