Electroactive conducting polymers for corrosion control

There is an intensive effort underway to develop new corrosion control coatings for structural metals. In part, this effort has been motivated by the desire to replace chromium(VI)-containing coatings currently used for corrosion control of iron and aluminum alloys. Cr(VI) has been shown to be hazardous to the environmental and to human health, and its use in many countries will be sharply curtailed in the coming years. Electroactive conducting polymers (ECPs) represent a class of interesting materials currently being explored for use in corrosion control coating systems, possibly as a replacement for Cr(VI)-based coatings. The electroactivity and the electronic conductivity (or semiconductivity) of ECPs set them apart from traditional organic coatings. As with chromate, interesting and potentially beneficial interactions of ECPs with active metal alloys such as steel and aluminum are anticipated, with concomitant alteration of their corrosion behavior. A review of this active research area will be presented in two parts. Here in Part 1, a general introduction to the topic of corrosion control by ECPs will be presented, including an overview of corrosion and its control by traditional methods, an introduction to ECPs and their properties, and a discussion of the processing issues surrounding the use of ECPs as coatings. Part 1 also includes a review of the literature on the use of ECPs as coatings (or components of coatings) on non-ferrous active metals, principally aluminum and aluminum alloys, although some work on zinc, copper, silver, titanium and silicon will also be described. In Part 2 of this review (to be published in the next issue of this journal), the rather extensive literature on the use of ECPs for the corrosion control of ferrous alloys (steels) will be reviewed. Electronic Publication     

Multicriteria decision making under uncertainty

Formalization for problems of multicriteria decision making under uncertainty is constructed in terms of guaranteed and weak estimates. A relevant definition of the vector maximinimax value is given. Parameterization and approximation of maximum, minimax, and maximinimax values based on the inverse logical convolution are suggested. An application for multicommodity networks is considered. Received: December 13, 2000 / Accepted: August 21, 2001?Published online May 8, 2002     

A STUDY OF VARIOUS BARRIERS IN ENCLOSED SOUND FIELD BY USING THE COMPUTER PROGRAM—SOFIS

In the study of the behaviors of barriers in an enclosed field, one should take into account such phenomena as sound energy reflection, absorption, scattering and diffraction. Therefore, the study is much more difficult than that in free field. In this paper, sound barriers are classified into four kinds according to their size, number and shape. Each kind of barriers is modelled by a corresponding method based on a computer program—SOFIS. The program combines the ray-tracing technique and statistical method. The impulse response and some acoustical parameters such as sound pressure level at different positions can be calculated by the program, no matter there are a certain kind of barriers in the field or the field is empty. The ray-tracing program and the algorithms for various barriers are validated by the comparison between measurement and prediction of the reverberation room and the anechoic room of the Northwestern Polytechnic University.     

Molecular mobility in hydrogels based on poly(acrylic acid) and macrodiisocyanates

Partially water-swellable polymer networks were synthesized on the basis of poly(acrylic acid) and various macrodiisocyanates. Hydrophilic and hydrophobic local regions were revealed in swollen networks (hydrogels) by means of the spin probe technique. The local mobility in hydrophobic regions depends on the macrodiisocyanate structure; however, it is substantially lower than that in hydrophilic regions for all gels. It was assumed that the presence of hydrophobic and hydrophilic regions and the difference in their local dynamics must have a substantial effect on the pharmacokinetics of release of drugs immobilized in these hydrogels.     

Application of rainbow schlieren deflectometry to measure temperature and oxygen concentration in a laminar gas-jet diffusion flame

The quantitative rainbow schlieren deflectometry (RSD) technique was applied to measure temperature and oxygen concentration in an axisymmetric hydrogen gas-jet diffusion flame burning in quiescent air at fuel jet exit Reynolds number of 70. Schlieren measurements were compared with conventional measurements using a thermocouple and a gas-sampling probe. Good agreement between the two measurement techniques was achieved on the fuel-lean side of the flame.     

Flow regime identification in a two-phase flow using wavelet transform

This study addresses the problem of the automatic flow regime identification in two-phase flows in pipes. A novel wavelet transform-based approach is proposed and validated using time series of differential pressure fluctuations. The experimental data on the differential pressure measured in a vertically installed Venturi meter for air-water flow were analyzed and found to be appropriate for flow regime identification. The wavelet spectrum of the measured signal is shown to characterize the flow patterns completely, and the vector of the wavelet variances is proposed as the characteristic vector for use in an on-line flow regime identification system.     

A Recursive Algorithm for Order Cycle-time that Minimizes Logistics Cost

A firm's logistics cost, including shipping and inventory-carrying, is a substantial percentage of its sales. Nevertheless, typical inventory-control methods ignore or insufficiently represent the shipping cost. This paper describes a recursive algorithm that determines the reorder cycle-time that minimizes total logistics cost. It allows for a realistic accounting of shipping cost, which is modelled here as a function of shipping distance and weight. The algorithm uses a relaxation procedure to identify a suitable initial approximation to the optimal order cycle-time and then, through a series of recursive steps, moves to the optimal result. We demonstrate the algorithm with a single item, with a group of items that share a common order cycle, and with multi-items when item demands are random variables. Experience with this algorithm indicates that it converges to the optimal result in a very few steps.     

CsI(Tl)晶体中反冲Cs和I核Quenching?Factor的测量

许多实验对用CsI(Tl)闪烁晶体作为探测器来寻找和探测暗物质的可行性进行了研究.本工作利用8MeV单能中子轰击CsI(Tl)晶体探测器来研究Cs核和I核的QuenchingFactor.在数据处理中,运用脉冲形状甄别(PSD)方法来分辨反冲核信号和本底信号.实验结果表明,在7keV到132keV的能区中,Quench ingFactor随着反冲核能量的减少而增加.在探测暗物质的实验中,这一性质对于CsI(Tl)晶体探测器获得较低的能量阈值是很有利的.     

Formation of hydrogenated amorphous carbon films from polymer pyrolysis

Free-standing and supported hydrogenated amorphous carbon films (a:C–H) were prepared upon pyrolysis of the polymer formed by ethanolamine (EA) and citric acid (CA), under an ambient atmosphere at 300 °C. EA facilitates the formation of the macroscopic films, while CA is essential for obtaining the a:C–H microstructure, which comprises a mixture of sp² and sp³ carbon. Received: 29 May 2001 / Accepted: 17 August 2001 / Published online: 20 December 2001     

Structures and stability of Al<Subscript><Emphasis Type="Bold">7</Emphasis></Subscript>C and Al<Subscript><Emphasis Type="Bold">7</Emphasis></Subscript>N clusters

We report results of the atomic and electronic structures of Al₇C cluster using ab initio molecular dynamics with ultrasoft pseudopotentials and generalized gradient approximation. The lowest energy structure is found to be the one in which carbon atom occupies an interstitial position in Al₇ cluster. The electronic structure shows that the recent observation [Chem. Phys. Lett. 316, 31 (2000)] of magic behavior of Al₇C^- cluster is due to a large highest occupied and lowest unoccupied molecular orbital (HOMO-LUMO) gap which makes Al₇C^- chemically inert. These results have further led us to the finding of a new neutral magic cluster Al₇N which has the same number of valence electrons as in Al₇C^- and a large HOMO-LUMO gap of 1.99 eV. Further, calculations have been carried out on (Al₇N)₂ to study interaction between magic clusters. Received 28 July 2001