Letter: Influence of experimental conditions on electrospray ionization mass spectrometry of ferrocenylalkylazoles

Influence of experimental conditions on electrospray/ionization (ESI) mass spectra of ferrocene derivatives FcCHRAz (Fc = eta5-C5H5-Fe-eta5- C5H4; R = H, Az = benzimidazole; R = Ph, Az = 2-methylimidazole) has been investigated. The spectra of all the compounds revealed [M]+*, product of its fragmentation [FcCHR]+ as well as products of ion/molecular interactions (protonated molecule [MH]+, binuclear ion [(FcCHR)2 Az]+, dimeric ion [M2]+* and its protonated form [M2H]+). Relative abundances of these ions appreciably (more than one order) depend on experimental conditions: analyte concentration, temperature of heated capillary, spray voltage, flow rate of mobile phase and polarity of solvents. Established correlations allow the selection of optimum experimental conditions for registration of ESI mass spectra, as required by the application. If an unknown compound is to be identified, it is necessary to operate by using polar solvents, small concentration, low temperature of heated capillary, high spray voltage and flow rates. There are high-intensity binuclear and protonated dimeric ions in mass spectra under other conditions. It can give rise to wrong interpretation of the structure of investigated compound. At the same time, for study of ion-molecular processes by ESI-MS it is necessary to use concentrated samples in non-polar solvents. In this case the dependence of reaction products yields on temperature and flow rate of mobile phase must be investigated.     

Degenerations of binary Lie and nilpotent Malcev algebras

We describe degenerations of four-dimensional binary Lie algebras, and five- and six-dimensional nilpotent Malcev algebras over ?. In particular, we describe all irreducible components of these varieties.     

Raman spectroscopic studies of terthiophenes for molecular electronics

The effect of thiol and selenol functionalization on the vibrational spectra and photochemical stability of terthiophene based molecular wires was investigated using surface-enhanced Raman scattering (SERS). The molecules were found to exhibit markedly different properties at the silver surface of the SERS substrate, despite having almost identical Raman spectra in solution and in the solid state. In contrast to terthiophene (3T), the bisthiolterthiophene (T3) and biselenol-terthiophene (Se3) molecules were stable against photoinduced structural changes when adsorbed to the metal surface at low concentrations. This indicates that the strong bonds to the silver surface, via S or Se terminal atoms, leads to a rapid decay of photoexcited states. Comparison with ab initio calculations shows that both T3 and Se3 bind with only one of the functional groups to the Ag surface.     

Direct probing of sorbent-solvent interactions for amylose tris(3,5-dimethylphenylcarbamate) using infrared spectroscopy, X-ray diffraction, solid-state NMR, and DFT modeling

The sorbent-solvent interactions for amylose tris(3, 5-dimethylphenylcarbamate) (ADMPC) with five commonly used solvents, hexane, methanol, ethanol, 2-propanol (IPA), and acetonitrile (ACN), are studied using attenuated total reflection infrared spectroscopy (ATR-IR) of thin sorbent films, X-ray diffraction (XRD) of thin films, (13)C cross polarization/magic angle spinning (CP/MAS) and MAS solid state NMR of polymer-coated silica beads (commercially termed "Chiralpak AD"), and DFT modeling. The ADMPC-polymer-coated silica beads are used commercially for analytical and preparative scale separations of chiral enantiomers. The polymer forms helical rods with intra- and inter-rod hydrogen bonds (H-bonds). There are various nm-sized cavities formed between the polymer side-chains and rods. The changes in the H-bonding states of the C=O and NH groups of the polymer upon absorption of each of the five solvents at 25 degrees C are determined with ATR-IR. The IR wavenumbers, the H-bonding interaction energies, and the H-bonding distances of the polymer side-chains with each of the solvent molecules are predicted using the DFT/B3LYP/6-311+g(d,p) level of theory. The changes in the polymer crystallinity upon absorption of each solvent are characterized with XRD. The changes in the polymer crystallinity and the H-bonding states of C=O groups are also probed with (13)C CP/MAS solid-state NMR. The changes in the polymer side-chain mobility are detected using (13)C MAS solid-state NMR. The H-bonding states of the polymer change upon absorption of each polar solvent and usually result in an increase in the polymer crystallinity and the side-chain mobility. The polymer rods are reorganized upon solvent absorption, and the distance between the rods increases with the increase in the solvent molecular size. These results have implications for understanding the role of the solvent in modifying the structure and behavior of the polymer sorbents.     

Eigenwaves in waveguides with dielectric inclusions: completeness

We formulate the definition of eigenwaves and associated waves in a nonhomogeneously filled waveguide using the system of eigenvectors and associated vectors of a pencil and prove its double completeness with a finite defect or without a defect. Then, we prove the completeness of the system of transversal components of eigenwaves and associated waves as well as the ‘mnimality’ of this system and show that this system is generally not a Schauder basis. This work is a continuation of the paper Eigenwaves in waveguides with dielectric inclusions: spectrum. Appl. Anal. 2013. doi:10.1080/00036811.2013.778980 by Y. Smirnov and Y. Shestopalov. Therefore, we omit the problem statements and all necessary basic definitions given in the previous paper.     

Updating the Chemiluminescence Oxygen‐Aftereffect Method for Determining the Rate Constant of the Peroxy‐Radical Self‐Reaction: Oxidation of Cyclohexene

Updating the facile chemiluminescence oxygen‐aftereffect method, most suitable for determining the rate constant (k_t) of the peroxy‐radical self‐reaction (main chemiluminescence channel), pertained to considering the sensitivity of such a method toward a disturbing influence of the peroxy radicals of the initiator of the chain oxidation process. Such a disturbance may derive from the side chemiluminescent reaction, which involves peroxy radicals of both hydrocarbon and initiator. To examine the applicability and limitations of the chemiluminescence method under present scrutiny, cyclohexene was used as the model oxidizable hydrocarbon substrate. Computer simulations of the reaction and chemiluminescence kinetics have demonstrated the validity of the considered methodology at the value of the rate constant of the propagation of the overall chain process by peroxy radicals of the initiator higher than 1 m ^?1 s^?1. Despite that the chemiluminescence time profile and the stationary level of the total chemiluminescence intensity depend on the kinetics of the side chemiluminescence channel and on the ratio of the excited‐state generation yields in the mentioned reaction channel and in the main chemiluminescence process, the value of k_t assessed by the oxygen‐aftereffect method has been found independent of variation of these characteristics.     

SERS intensity optimization by controlling the size and shape of faceted gold nanoparticles

In this work, we experimentally investigated the surface‐enhanced Raman spectroscopy (SERS) activity of faceted gold nanoparticles, which have been theoretically predicted to yield giant enhancements. Glycine was used to determine the SERS activity as a function of pH and ionic strength and to estimate the corresponding enhancement factor (EF). By optimizing the synthesis conditions of the flat prismatic nanoparticles, it was possible to control their size and shape. We demonstrate that the maximum SERS intensity increases with the edge length of the triangle, reaching a maximum EF of ∼10¹³ for 1.9 µm triangles (the largest tested). The corresponding glycine detection limit was as low as 10⁻¹² M , close to the single‐molecule threshold. Copyright © 2007 John Wiley & Sons, Ltd.     

Unprecedented Diastereoselective Arylogous Michael Addition of Unactivated Phthalides

The first highly enantioselective arylogous Michael reaction (AMR) of 3-unsubstituted phthalides has been described. This phase-transfer methodology, which uses catalytic amounts of KOH/18-crown-6 catalyst in mesitylene in the presence of N,O-bis(trimethylsilyl)acetamide (BSA), gives access to a broad range of 3-monosubstituted phthalides with high levels of syn diastereoselectivity and good yields, starting from 3-unsubstituted derivatives and diverse α,β-unsaturated carbonyl compounds. The reaction also applies to unactivated 3-alkyl phthalides to afford 3,3-dialkyl derivatives. A plausible mechanism has been suggested. DFT analysis of possible transition states gives a rationale of the high syn diastereoselectivity observed and its correlation with the solvent's dielectric constant.