From Lead Iodide to a Radical Form Lead‐Iodide Superlattice: High Conductance Gain and Broader Band for Photoconductive Response

Superlattice materials offer new opportunities to modify optical and electrical properties of recently emerging 2D materials. The insertion of tetraethylbenzidine (EtDAB) into interlamination of the established 2D PbI₂ semiconductor through a mild solution method yielded the first lead iodide superlattice, EtDAB?4PbI₂ (EtDAB=tetraethylbenzidine), with radical and non‐radical forms. The non‐radical form has a non‐ionic structure that differs from the common ionic structures for inorganic–organic hybrid lead halides. The radical form shows five orders of magnitude greater conductance and broader photoconductive response range (UV/Vis → UV/Vis‐IR), than pure PbI₂ and the non‐radical form of the superlattice.     

Dioxomolybdenum(VI) complex covalently attached to amino‐modified graphene oxide: heterogeneous catalyst for the epoxidation of alkenes

Transition metal salen complex MoO₂–salen was successfully tethered onto amino‐functionalized graphene oxide (designated as MoO₂–salen–GO), which was tested in the epoxidation of various alkenes using tert‐butylhydroperoxide or H₂O₂ as oxidant. Characterization results showed that dioxomolybdenum(VI) complex was successfully grafted onto the amino‐functionalized graphene oxide and the structure of the graphene oxide was well preserved after several stepwise synthesis procedures. Catalytic tests showed that heterogeneous catalyst MoO₂–salen–GO was more active than its homogeneous analogue MoO₂–salen in the epoxidation of cyclooctene due to site isolation. In addition, the MoO₂–salen–GO catalyst could be reused three times without significant loss of activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Foldable Detergents for Membrane Protein Study: Importance of Detergent Core Flexibility in Protein Stabilization

Membrane proteins are of biological and pharmaceutical significance. However, their structural study is extremely challenging mainly due to the fact that only a small number of chemical tools are suitable for stabilizing membrane proteins in solution. Detergents are widely used in membrane protein study, but conventional detergents are generally poor at stabilizing challenging membrane proteins such as G protein-coupled receptors and protein complexes. In the current study, we prepared tandem triazine-based maltosides (TZMs) with two amphiphilic triazine units connected by different diamine linkers, hydrazine (TZM−Hs) and 1,2-ethylenediamine (TZM−Es). These TZMs were consistently superior to a gold standard detergent (DDM) in terms of stabilizing a few membrane proteins. In addition, the TZM−Es containing a long linker showed more general protein stabilization efficacy with multiple membrane proteins than the TZM−Hs containing a short linker. This result indicates that introduction of the flexible1,2-ethylenediamine linker between two rigid triazine rings enables the TZM−Es to fold into favourable conformations in order to promote membrane protein stability. The novel concept of detergent foldability introduced in the current study has potential in rational detergent design and membrane protein applications.     

Enhanced electrochemical properties of a novel polyvinyl formal membrane supporting gel polymer electrolyte by Al2O3 modification

Polyvinyl formal (PVFM)‐based dense polymer membranes with nano‐Al₂O₃ doping are prepared via phase inversion method. The membranes and also their performances as gel polymer electrolytes (GPEs) for lithium ion battery are studied by field emission scanning electron microscope, X‐ray diffraction, differential scanning calorimetry, mechanical strength test, electrolyte uptake test, electrochemical impedance spectroscopy, cyclic voltammetry, and charge–discharge test. The polymer membrane with 3 wt % nano‐Al₂O₃ doping shows the improved mechanical strength of 12.16 MPa and electrolyte uptake of 431.25% compared with 10.47 MPa and 310.59% of the undoped sample, respectively. The membrane absorbs and swells liquid electrolyte to form stable GPE with ionic conductivity of 4.92 × 10^?4 S cm^?1 at room temperature, which is higher than 1.77 × 10^?4 S cm^?1 of GPE from the undoped membrane. Moreover, the Al₂O₃‐modified membrane supporting GPE exhibits wide electrochemical stability window of 1.2–4.8 V (vs. Li/Li⁺) and good compatibility with LiFePO₄ electrode, which implies Al₂O₃‐modified PVFM‐based GPE to be a promising candidate for lithium ion batteries. © 2014 Wiley Periodicals, Inc. J. Polym. Sci. Part B: Polym. Phys. 2014 , 52, 572–577     

Three-dimensional mode shapes of a tire using experimental modal analysis

Experimental modal analysis of a tire was carried out. Mode shapes in the radial, tangential and lateral directions of the tire under radial and tangential excitation, respectively, were obtained for the first time. The consistency of tire experimental modal frequencies in three directions was observed after careful design and adjustment of the test method. This indicates the accuracy of the experiments. The phenomena discovered in this experimental study, such as the mode shapes of the rim and the complex modes of the tire, are discussed in detail. The modal parameters acquired from experimental modal analysis of the tire can be used for the modeling of tire dynamics.     

Synthesis and properties of cross‐linkable high molecular weight fluorinated copolyimides

A series of novel high molecular weight fluorinated co‐polyimides (Co‐PIs) containing styryl side chain based on 1,3‐bis(2‐trifluoromethyl‐4‐aminophenoxy)‐5‐(2,3,4,5‐tetrafluorophenoxy)benzene (6FTFPB) were successfully synthesized. The weight‐average molecular weights (M_ws) and polydispersities of the co‐polyimides were in the range 8.93–10.81 × 10⁴ and 1.33–1.82, respectively. The co‐polyimide film showed excellent solubility in organic solvents, high tensile properties (tensile strength exceeded 91 MPa), excellent optical transparency (cutoff wavelength at 332–339 nm and light transparencies above 89% at a wavelength of 550 nm), and high thermal stability (5% thermal weight‐loss temperature up to 510 °C). The casting and spinning films could be cross‐linked by thermal curing. The cured films show better combination property (including excellent resistance to solvents) than that of co‐polyimides. For instance, the glass transition temperature of Co‐PI‐1 (the molar weight ratio of 6FTFPB was 30%) increased from 217 to 271 °C, the tensile strength enhanced from 94 to 96 MPa, the 5% thermal weight‐loss temperature improved from 514 to 525 °C. Moreover, after cured, Co‐PI‐1 film also has a coefficient of thermal expansion (CTE) value of 60.3 ppm °C^?1, low root mean square surface roughness (R_q) at 4.130 nm and low dielectric constant of 2.60. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 349–359     

担载材料对TiO2薄膜光催化活性的影响

ＴＩＯ２薄膜催化剂光催化治理大气和水污染，具有实际应用的前景，受到科学界的高度重视“－‘’．实验结果发现，担载材料对膜的催化活性有很大影响”’，如采用玻璃、不锈钢。石英作为ＴＩＯ。膜的载体时，由于界面离子扩散作用的不同，使得膜的光催化活性有很大的差异...     

Insight into the deamination mechanism of 6-cyclopropylamino guanosine analogs for anti-HIV drug design

Deamination is a crucial step in the transformation of 6-cyclopropylamino guanosine prodrug to its active form. A convenient method using capillary electrophoresis (CE) without sample labeling was developed to analyze the deamination of a series of D-/L-6-cyclopropylamino guanosine analogs by mouse liver homogenate, mouse liver microsome, and adenosine deaminase (ADA). A two-step process involving a 6-amino guanosine intermediate formed by oxidative N-dealkylation was demonstrated in the metabolism of 6-cyclopropylamino guanosine to 6-hydroxy guanosine. The results indicated that the transformation rates of different prodrugs to the active form varied greatly, which were closely correlated with the configuration of nucleosides and the structure of glycosyl groups. Most importantly, D-form analogs were metabolized much faster than their L-counterparts, thus clearly pointed out that compared to guanine, modification of glycosyl part might be a better choice for the development of L-guanosine analogs for the treatment of HIV.