Millimeter wave beams diffracted from reflecting gratings

According to the angular-spectrum method, a radiation beam of an antenna horn in the Fresnal region is decomposed into the plane waves with the fast Fourier transform algorithm and the waves diffracted from a reflection grating are superposed as a diffracted beam. Compared with the reflected beam from the same size mirror, the radiation half width of the diffracted beam from a grating is narrower and its lateral shape is shift. These performances have been experimentally verified at Ka-band by: (1). The relative diffraction efficiencies in the first order with two triangular gratings which is put along propagating direction of a beam produced by a conical lens-horn. (2). H-plane lateral width with power—3dB lapsed of the focus beam from a grating and a mirror in a grating spectrometer for millimeter waves (25–100 GHz).     

在BBO中产生217.3-2 21.4nm高功率和频输出

用Q-YAG激光的三次谐波(355nm)与调谐的Rh·6G染料激光在β-BaB2O4(BBO)晶体中和频,获得217.3～221.4nm连续调谐输出,和频输出的最大能量为250μJ,转换效率为11%.我们还讨论了获取最大和频输出能量的一些实验条件.     

The Drazin inverses of products and differences of orthogonal projections

In this note, the Drazin inverses of products and differences of orthogonal projections on a Hilbert space are established.     

Investigation on crosslinking behaviors of NBR/PVC filled with anhydrous copper sulfate particles by dynamic mechanical analysis

Crosslinking behaviors of acrylonitrile butadiene rubber (NBR)/poly (vinyl chloride) (PVC) alloy, filled with anhydrous copper sulfate (CuSO₄) particles, were investigated for the first time by dynamic mechanical analysis (DMA) under hetero and isothermal modes, respectively. In the heterothermal testing, (NBR/PVC)/CuSO₄ compound showed two marked increases in the storage modulus (E′), corresponding to coordination crosslinking of NBR-CuSO₄ and self-crosslinking of NBR and PVC respectively. During the isothermal testing, a dramatic increase in E′ was found at the initial stage while that of original NBR/PVC alloy was not detected. The marked increase in E′ of (NBR/PVC)/CuSO₄ compound was mainly due to the crosslinking induced by coordination between  CN and Cu²⁺. The increasing extent of E′ increased with the rise of CuSO₄ content, suggesting the formation of a greater number of crosslinks. Moreover, the activation energy (E_a) of crosslinking process was about 139 kJ/mol. In this work, fourier transform infrared spectrum (FT-IR) and equilibrium swelling method were also performed for the characterization of the compound. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 41–51, 2007     

Effect of Notoginsenoside-Rg_1 on the Expression of Several Proteins in the Striatum of Rat Models with Parkinson′s Disease

Introduction Parkinson′sdisease(PD),alsocalledshaking palsy,isaneurodegenerativedisorderandfrequently occursinthepeopleabovetheageof65[1].PDisa relativelycommonneurodegenerativedisorder,which hasclinicalsymptomsincludingbradykinesia,rest tremor,rigidity,…     

Acute Triangulations of Flat Mobius Strips

In this paper we investigate the acute triangulations of flat Mobius strips. We find out that we can always triangulate a flat Mobius strip with at most nine acute triangles, and sometimes (but not always) that many triangles are really needed.     

相互作用对玻色气体热力学性质及稳定性的影响

根据由赝势法得到的非理想玻色气体的自由能和状态方程，研究了相互作用对凝聚温度的影响.从热力学角度揭示了存在引力作用时定压热容量、等温压缩系数、定压膨胀系数的反常热力学特性.研究了引力作用下玻色气体系统的不稳定性，给出了不稳定性的温度判据和粒子数密度判据. 关键词： 相互作用 玻色气体 热力学性质 不稳定性判据     

环形光纤声发射传感器的相位调制特性研究

提出了一种基于光纤Sagnac干涉仪的环形传感器，用于固体表面传播的超声波的检测.这种传感器的特点是能够精确地检测由固体表面传播的超声波产生的微弱振动.当超声波信号通过光纤传感器的两个臂到达探测器时，干涉仪的输出光强度受到了超声信号的调制.通过检测干涉仪的输出光强度并利用Fourier变换，测得了超声信号的振幅和频率.而且对传感系统的位相调制特性进行了仿真，并对实验结果进行了分析，结果表明该系统可用于固体表面传播的超声波频率特征的识别.     

Photoinduced Transformation between Charge Carrier and Spin Carrier in Polymers

By dynamical simulations, we show a transforming process between neutral soliton （spin carrier） and charged soliton （charge carrier） in polymers via photo-excitation, taking a polaron as the transitional bridge. It is photoinduced transformation between spin carrier and charge carrier. In this way, we demonstrate an access for polymers to be applied to spintronics.