Synthesis,crystal structures and magnetic properties of transition metal dicyanamide complexes coordinated with pyridyl nitronyl nitroxides

Two novel complexes Ni(NITpPy)₂[N(CN)₂]₂ · 2H₂O (I) and Zn(NITpPy)₂[N(CN)₂]₂ · 2H₂O (II) (NITpPy = 2-(p-pyridyl)-4,4,5,5- tetramethylimidazoline-1-oxyl-3-oxide) were synthesized and characterized by infrared spectra, elemental analyses, and UV-Vis techniques. The crystal structures of both complexes have been determined by X-ray diffraction analysis. Both complexes are of centrosymmetric distorted octahedral co-ordination geometry in which metal ions are bound to two dicyanamide anions, two water molecules, and two radicals through the nitrogen atom of pyridine rings and show one-dimensional chain structure via hydrogen bonds. The magnetic properties of complexes I and II were investigated in the temperature range 5–300 K and discussed in detail. The two compounds exhibit weak intermolecular antiferromagnetic interaction. In complex II, the diamagnetic metal zinc just plays the role of a bridge. The article was submitted by the authors in English.     

甲壳素-壳聚糖对皂土悬浮液的絮凝

研究了三种摩尔质量大体相同而脱乙酰度分别为93%、78%和62%的甲壳素-壳聚糖在pH=3～6范围内对皂土悬浮液的絮凝性质, 并与非离子型絮凝剂聚丙烯酰胺作了比较, 证明含自由氨基的甲壳素-壳聚糖在酸性溶液中形成阳离子聚电解质后. 对带负电的皂土悬浮颗粒有很好的絮凝能力. 通过对上述三种聚合物的絮凝能力、在皂土颗粒表面的吸附量等测定, 认为絮凝中桥连机制起了主导作用, 但聚合物所带正电荷则有利于被皂土颗粒所吸附, 电中和还降低了颗粒间的静电排斥, 这都对桥连絮凝起了促进作用. 聚丙烯酰胺分子在水中不带电, 故当介质pH升高使皂土颗粒双电层变厚时, 絮凝能力迅速下降.     

Efficient dehalogenation of polyhalomethanes and production of strong acids in aqueous environments: water-catalyzed O--H-insertion and HI-elimination reactions of isodiiodomethane (CH2I-I) with water

A combined experimental and theoretical study of the ultraviolet photolysis of CH2I2 in water is reported. Ultraviolet photolysis of low concentrations of CH2I2 in water was experimentally observed to lead to almost complete conversion into CH2(OH)2 and 2HI products. Picosecond time-resolved resonance Raman spectroscopy experiments in mixed water/acetonitrile solvents (25%-75% water) showed that appreciable amounts of isodiiodomethane (CH2I-I) were formed within several picoseconds and the decay of the CH2I-I species became substantially shorter with increasing water concentration, suggesting that CH2I-I may be reacting with water. Ab initio calculations demonstrate the CH2I-I species is able to react readily with water via a water-catalyzed O--H-insertion and HI-elimination reaction followed by its CH2I(OH) product undergoing a further water-catalyzed HI-elimination reaction to make a H2C=O product. These HI-elimination reactions produce the two HI leaving groups observed experimentally and the H2C=O product further reacts with water to produce the other final CH2(OH)2 product observed in the photochemistry experiments. These results suggest that CH2I-I is the species that reacts with water to produce the CH2(OH)2 and 2HI products seen in the photochemistry experiments. The present study demonstrates that ultraviolet photolysis of CH2I2 at low concentration leads to efficient dehalogenation and release of multiple strong acid (HI) leaving groups. Some possible ramifications for the decomposition of polyhalomethanes and halomethanols in aqueous environments as well as the photochemistry of polyhalomethanes in the natural environment are briefly discussed.     

Calycilactone A, a novel hexacyclic alkaloid from Daphniphyllum calycillum

A novel Daphniphyllum alkaloid with a rearranged fused-hexacyclic ring system, calycilactone A, was isolated from the leaves of Daphniphyllum calycillum (Daphniphyllaceae), and the structure and relative stereochemistry of the new compound were elucidated on the basis of spectroscopic data.     

EFFECT OF MOLECULAR WEIGHT OF PDMS ON MORPHOLOGY AND MECHANICAL PROPERTIES OF PP/PDMS BLENDS

 A series of polydimethylsiloxane (PDMS) with varied molecular weights (Mw = 3  106, 1  106 and 0.5  106) were melt blended with PP to investigate the effect of PDMS molecular weight (MW) on the morphology and mechanical properties of PP/PDMS blends. Scanning electron microscopic (SEM) examination showed that the size of PDMS domains was dependent on the MW of PDMS. It was found that the lower the value of PDMS MW, the better dispersion of the PDMS domains in the PP matrix. Tensile and Izod impact tests revealed that the addition of PDMS with lower MW would lead to a more significant increase in impact strength of the blends compared with the blends with higher MW ones, while the influence of the molecular weight on tensile strengths of the blends was relatively small in the MW range studied. Differential scanning calorimetry (DSC) results also showed that the crystallization temperature of PP was increased with decreasing PDMS MW, indicating a better nucleation capability of lower MW of PDMS. Melting flow rate (MFR) measurements indicated that the processibility of PP could be enhanced by adding PDMS, and again the lower MW PDMS resulted in better data. Our work demonstrates that not only the processibility but also the mechanical properties of PP could be enhanced to a more significant degree by using low MW PDMS than the higher ones.     

Sensitive Determination of DNA by Resonance Light Scattering with Pentamethoxyl Red

A novel sensitive method for the determination of nucleic acid (DNA) using the resonance light scattering (RLS) spectra of pentamethoxyl red has been developed. It is based on the effects on the resonance light scattering of Pentamethoxyl Red. The effective factors and the optimum conditions were studied, and the enhanced intensity of RLS is in proportion to the concentration of nucleic acids in the range of 0–2.54 µg mL⁻¹ for ct-DNA, 0–4.54 µg mL⁻¹ for hs-DNA. The limits of detection are 1.1 and 2.1 ng mL⁻¹, respectively. Most foreign substances do not interfere in the determination, and the method has good selectivity and high sensitivity. It has been applied to the determination of DNA in synthetic samples and in real samples with satisfactory results.     

Agonist–PPARγ interactions: Molecular modeling study with docking approach

Docking simulation of 18 agonists with the ligand binding pocket (LBP) of PPARγ has been performed. The binding conformations and binding affinities of these agonists were obtained by use of the flexible docking protocol FlexX. Test compound calculations indicated that FlexX can reproduce the binding conformation of the crystal structure (root mean square deviation = 1.43 Å); moreover, the predicted binding affinities correlate well with the activities of these agonists. The interaction model and pharmacophore of PPARγ agonists were derived and the difference in biologic activities of these agonists can be well explained. The PPARγ agonists must have both polar head and the hydrophobic tail, which form hydrogen bonds and hydrophobic contacts with hydrophilic and hydrophobic regions of the LBP of PPARγ, respectively. In addition, a suitable linker is also necessary. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 93: 405–410, 2003     

The detection of formaldehyde in textiles using interdigitated microelectrode array diffusion layer titration with electrogenerated hypobromite

An interdigitated microelectrode array (IDA) was applied to the determination of formaldehyde released from textiles produced in industry. The proposed method is based on formaldehyde reaction with hypobromite which is formed in weakly basic media by control current electrooxidation of bromide on the generator segment of the IDA array. The unreacted hypobromite diffuses through the gap between individually polarisable IDA segments and it is amperometrically detected on the collector segment of the IDA. The efficiency of this nonconvective transfer process in the absence of formaldehyde was substantially higher (78%) in comparison with that when using the rotating ring disc electrode. The influence of the added formaldehyde on the transfer process can be utilised to develop a simple and sensitive analytical procedure for formaldehyde detection with a detection limit of 4×10⁻⁶ mol dm⁻³.     

巡游电子系化合物La0.8Ce0.2(Fe1-xCox)11.4Si1.6的磁热效应

对制备的化合物La0.8Ce0.2(Fe1-xCox)11.4Si1.6(x=0.02,0.04,0.06)的相组成、巡游电子变磁转变(IEMT)特性和磁热效应(MCE)进行了研究。粉末X射线衍射结果表明,经1373 K真空退火处理7 d后,化合物La0.8Ce0.2(Fe1-xCox)11.4Si1.6(x=0.02,0.04,0.06)均为单相立方NaZn13型晶体结构。随着Co含量由x=0.02增加到x=0.06,样品的居里温度TC由207 K上升到277 K。在0~1.5 T磁场变化下,x=0.02,0.04,0.06时样品的最大磁熵变|ΔSM(T)|分别为40.17,12.60和7.65 J.kg-1.K-1,可见该化合物有巨大的磁熵变,而且随Co含量的增加最大磁熵变迅速减小。该化合物的巨大磁熵变来源于TC处的一级相变,以及在TC以上由磁场诱导IEMT,但由于Co原子对Fe原子的替代能够抑制变磁转变的发生,因此该系化合物最大磁熵变随Co含量的增加迅速减小。     

4,4′-(多苯基三联苯)双(有机硅烷)的合成

前文曾经报道利用四苯基环戊二烯酮为双烯体,乙烯基或烯丙基三乙氧基硅烷及其硅氧烷为亲双烯体通过Diels-Alder反应合成的多苯基芳基有机硅化合物作为硅橡胶的热