Small Scale Models Subjected to Buried Blast Loading Part I: Floorboard Accelerations and Related Passenger Injury Metrics with Protective Hulls

Small scale models representing key vehicle structural elements, including both floorboards and bottom-mounted, downward V-shape hulls in various configurations, have been manufactured and subjected to a range of buried blast loading conditions. By varying surface stand-off distance and depth of burial for several hull and structure configurations, the input-scaled response of aluminum full-scale vehicle floorboards has been quantified using high speed stereo-vision. Specifically, the maximum vertical acceleration on the floorboard and the corresponding Head Injury Criterion (HIC₁₅) are quantified as metrics to assess the severity of the blast event. Results show standard V-shaped hulls provide essential blast mitigation, with reductions in floorboard measurements up to 47X in maximum acceleration and HIC₁₅. Though variations in protective hull geometry provide modest reductions in the severity of a floorboard blast event, results also show that personnel on typical floorboard structures during blast loading events will incur unacceptable shock loading conditions, resulting in either serious or fatal injury. A more appropriate design scenario would be to consider situations that employ frame-mounted passenger seating to reduce the potential for injury. A second set of experiments will be presented in Part II that focuses on frame motions and accelerations when steel frames and steel structures are employed with various frame connections and coatings for frame blast mitigation.     

重度子痫前期产妇剖宫产布比卡因蛛网膜下腔阻滞麻醉适合剂量的临床研究

目的 探讨重度子痫前期产妇剖宫产重比重布比卡因蛛网膜下腔阻滞麻醉（腰麻）的适合剂量。方法 选取200例重度子痫前期产妇,ASAⅠ级或Ⅱ级,按随机数字表法分为4组,每组各50 例,相应各组鞘内注入布比卡因剂量分别为10、8、6 及4mg,并混合2.5μg 舒芬太尼。选择L3~4行腰硬联合穿刺,注药10min 后记录麻醉平面。根据结果进行Probit 回归分析,计算布比卡因腰麻的ED50和ED95。观察各组利多卡因及去氧肾上腺素的用量、肌松效果及患者麻醉满意度,观察各组术中并发症以及新生儿的Apgar 评分和脐动脉pH。结果 重度子痫前期患者腰麻剖宫产布比卡因ED50 和ED95分别为：6.51（95%CI：5.81～7.01）和8.68（95%CI：7.96～10.26）。4 组患者10min 后麻醉平面的差异均有统计学意义（均P＜0.05）。4mg 组利多卡因用量高于其他3组,差异有统计学意义（P＜0.05）。8mg 组、10mg 组去氧肾上腺素的用量高于其他两组,差异均有统计学意义（均P＜0.05）。低血压的发生率8mg 组、10mg 组高于其他两组,差异均有统计学意义（均P＜0.05）。４ 组间其他不良反应恶心、呕吐、寒战以及心动过缓发生率的差异无统计学意义（P＞0.05）。4 组胎儿娩出后1、5min Apgar 评分及脐动脉血气分析的结果差异均无统计学意义（均P＞0.05）。结论 重度子痫前期产妇剖宫产鞘内注入6mg 布比卡因混合2.5μg舒芬太尼,必要时辅以硬膜外麻醉,麻醉效果确切,血流动力学稳定,适合该类患者手术麻醉。     

The Reaction Activity of Aromatic Carbonyl Compounds with Diphenylphosphine Oxide Studied by 31P NMR

Abstract

A series of α-hydroxyphosphine oxides were prepared by the reactions of diphenylphosphine oxide and aromatic carbonyl compounds and characterized by ¹H NMR, ¹³C NMR, ³¹P NMR, FT-IR, ESI-MS, and HR-MS spectra. The reaction rates and experimental conditions of aromatic aldehydes and aromatic ketones were obviously different due to the activity of their carbonyls. The different substituents of the aromatic aldehydes affected the reaction rate too, and the quantitative reactivity of their substituent conformed to the Hammett equation. The results were confirmed by ³¹P NMR spectroscopy.     

Synthesis and Characterization of Nitrogen Heterocyclic Derivatives Containing Sulfur–Ether and Schiff Base

Abstract

A series of new nitrogen heterocyclic compounds containing sulfur–ether (8a–8f) and Schiff-base (9a–9q) functionalities were synthesized by the reaction of the pharmaceutical lead compound containing both benzimidazole and 1,2,4-triazole rings. The compounds were characterized by ¹H NMR, ¹³C NMR, FT-IR, HR-MS, and ESI-MS.     

多孔软硬磁Ni0.5Zn0.5Fe2O4/SrFe12O19复合纤维制备及吸波性能

通过静电纺丝技术制备了多孔软硬磁Ni_0.5Zn_0.5Fe₂O₄/SrFe₁₂O₁₉复合纤维,利用综合热重分析仪（TG-DSC）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线能谱仪（EDS）和矢量网络分析仪（VNA）等对复合纤维的晶体结构、微观形貌和电磁性能进行了表征,研究了不同软硬磁质量比对纤维结构和性能的影响。结果表明：900℃下制备的复合纤维具有立体多孔结构,软硬磁质量比为1∶3时,复合纤维的比表面积达到55 m²·g^-1。吸波性能测试结果显示,当吸波剂涂层厚度为3.5 mm时,复合纤维在10.6 GHz处反射损失（R_L）值达到-31.9 dB,在2~18 GHz频率范围内,R_L值小于-10 dB的吸收带宽达到10.5 GHz,覆盖了整个X波段（8.2~12.4 GHz）和Ku波段（12.4~18 GHz）,显示出优异的宽波段吸收性能。     

三种基于2，4，6-三(3-吡啶基)-1，3，5-苯配体的Ni(Ⅱ)基配位聚合物的合成、结构及催化性能

通过调变溶剂热的反应条件,我们合成了3种Ni (Ⅱ)基的配位聚合物(CPs)[Ni (CH₃-BDC)(3-TBT)(H₂O)₂]·EtOH·2H₂O (CP1)、[Ni₃(CH₃-BDC)₃(3-TBT)₂(H₂O)₅]·2DMF·2H₂O (CP2)和[Ni₃(CH₃-BDC)₃(3-TBT)₂(H₂O)₆]·2DMF·4H₂O (CP3),其中CH₃-H₂BDC=5-methylisophthalic acid,3-TBT=2,4,6-tris (3-pyridyl)-1,3,5-benzene。X射线单晶衍射分析表明,3个CPs都是由相似的Ni₂(CH₃-BDC)₂的双核单元构建的,并分别呈现出从零维(0D)、2D到3D结构的网络骨架。反应条件的微小调变,导致了不同结构的配位聚合物。同时,催化实验表明,3在无溶剂的温和反应条件下,CP3对苄醇及其衍生物与苯胺的氧化-偶联反应表现出极好的催化活性和循环稳定性。     

CP@NiAl-LDH复合材料的制备及其超级电容器性能

通过采用简易温和的水热条件制备导电聚合物@镍铝层状双金属氧化物复合材料（CP@NiAl-LDH）,构建电子/离子的高速传输纳米通道,利用SEM和XRD对复合材料结构形貌进行表征。电化学性能测试结果表明,导电聚合物为复合材料提供一定的赝电容,促进电荷的快速转移,使CP@NiAl-LDH的电容性能得以显著提升。PPy@LDH具有最好的电容性能,在1 A·g^-1的电流密度下,其比容量高达3 010.3 F·g^-1,当电流密度升高到20 A·g^-1时,其比电容保持率为73.1%,表现出优异的倍率性能;同时,在10 A·g^-1的电流密度下10 000次充放电循环后仍具有88.8%的比容量保持率,具有优异的循环稳定性。这主要归功于NiAl-LDH与导电聚合物之间的协同增强效应。     

半夹芯16电子碳硼烷化合物Me4CpCoS2C2B10H10与二茂铁炔酮的反应性

邻位碳硼烷分别与正丁基锂、硫粉和Me₄CpCo(CO)I₂反应合成得到半夹芯16电子碳硼烷化合物Me₄CpCoS₂C₂B₁₀H₁₀ (1).1与二茂铁炔酮在二氯甲烷中反应得到产物{(Me₄CpCoS₂C₂B₁₀H₁₀)[FcC(O)CHCCHCC(O)Fc]} (2)(Fc=二茂铁基).2是一个1:2的加成产物,2个二茂铁炔酮分子以头-尾的方式加成到分子1中的1个Co-S键上.1和2分别用红外、核磁、元素分析、质谱和单晶X-射线衍射等表征方法进行了结构表征.     

以3-硝基邻苯二甲酸根构建的环状双核Zn（Ⅱ）, Cd（Ⅱ）配合物的合成及晶体结构

以3-硝基邻苯二甲酸和咪唑及2,2’-联吡啶为配体构筑了2种配合物[Zn₂（npa）₂（Im）₄]（1）和[Cd₂（npa）₂（2,2’-bipy）₂（H₂O）₂]·2H₂O（2）（npa^2-=3-硝基邻苯二甲酸根,Im=咪唑,2,2’-bipy=2,2’-联吡啶）。用元素分析、红外光谱对其进行了表征,并用单晶X-射线衍射测定了配合物的晶体结构;测定了配合物1和2的热稳定性。2个配合物均为双核分子,具有M₂C₈O₄十四元大环结构。配合物1的双核单元通过分子间氢键形成3D网络结构,配合物2的双核单元通过分子间氢键和π-π堆积形成2D层状结构。     

Mo-V-Nb多组元氧化物催化乳酸氧化脱氢反应制备丙酮酸

丙酮酸是一种重要的有机合成和药物合成中间体,本文采用成本低廉的乳酸为原料,以Mo-V-Nb多组元氧化物为催化剂,在较低的反应温度下催化氧化脱氢合成了具有高附加值的丙酮酸。应用X射线衍射（XRD）和扫描电子显微镜（SEM）表征了Mo-V-Nb多组元氧化物的物相组成和微观结构,采用气相色谱质谱联用（GC-MS）分析了反应产物,研究了乳酸氧化脱氢可能的反应路径,并深入探讨了关键反应参数反应温度、氧气分压和质量空速对催化选择性和乳酸转化率的影响。