Novel aromatic polyamides bearing pendent diphenylamino or carbazolyl groups

Two new diamines, 2,4‐diaminotriphenylamine ( 3 ) and N‐(2,4‐diaminophenyl)carbazole ( 4 ), were synthesized via the cesium fluoride‐mediated aromatic substitution reactions of 1‐fluoro‐2,4‐dinitrobenzene with diphenylamine and carbazole, followed by palladium‐catalyzed hydrazine reduction. Amorphous and soluble aramids having pendent diphenylamino and carbazolyl groups were prepared by the phosphorylation polycondensation of aromatic dicarboxylic acids with diamines 3 and 4 , respectively. The aramids derived from diamine 3 had sufficiently high molecular weights to permit the casting of flexible and tough films. They exhibited excellent mechanical properties and moderately high softening temperatures in the 221–298 °C range. However, the reactions of diamine 4 with aromatic diacids gave relatively lower molecular weights products that could not afford flexible films. For a comparative purpose, the parent aramids derived from m‐phenylenediamine and aromatic diacids were also prepared and characterized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3302–3313, 2004     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

光辅助超高真空CVD系统制备SiGe异质结双极晶体管研究

介绍了采用紫外光化学汽相淀积(UVCVD)、超高真空化学汽相淀积(UHVCVD)和超低压化学汽相淀积(ULPCVD)技术研制的化学汽相淀积(CVD)工艺系统,简称U³CVD系统.应用该系统,在450℃低温和10^-7Pa超高真空环境下研制出了硅锗(SiGe)材料和硅锗异质结双极晶体管(SiGe HBT)材料.实验表明,该系统制备的SiGe HBT材料性能良好.     

热等离子体裂解天然气制备C2烃

采用氮气热等离子体来裂解天然气制备乙炔乙烯,着重研究了天然气转化率和乙炔、乙烯收率随氮气流量和天然气流量的变化.结果表明,天然气流量与氮气流量之比为11时,可得到较好的结果.当等离子体功率为15kW、天然气流量为3Nm3*h-1、氮气流量为3Nm3*h-1时得到最好的结果.这时天然气转化率为57%,乙炔、乙烯的收率分别为34%和9%;乙炔在反应气中的体积浓度为7.5%,与部分氧化法相似;扣除不参加反应的氮气,乙炔在气相产品中的体积浓度为13.2%,与热力学平衡计算结果基本符合.     

串列加速器头部电极改进方案

通过改变头部电极的局部形状来改善头部电场, 运用Poisson程序计算几种可能形状下表面电场的分布, 并以此给出最佳的改进方案.     

上海光源储存环磁聚焦结构设计

上海光源是一台正在建设中的低发射度第三代同步辐射光源. 经过优化后, 储存环有两种直线节长度, 周长432m,在能量3.5GeV下束流发射度为3.9nm.rad, 直线节处的β函数和色散函数有足够的调节范围. 跟踪研究表明, 即使带上磁铁高阶场误差, 储存环仍有足够大的动力学孔径和能量接受度.     

N-Widths and Average Widths of Besov Classes in Sobolev Spaces

In this paper, we consider the n-widths and average widths of Besov classes in the usual Sobolev spaces. The weak asymptotic results concerning the Kolmogorov n-widths, the linear n-widths, the Gel＇fand n-widths, in the Sobolev spaces on T^d, and the infinite-dimensional widths and the average widths in the Sobolev spaces on Ra are obtained, respectively.