Temperature-dependent photoluminescence of GaN grown on β-Si3N4/Si (1 1 1) by plasma-assisted MBE

Photoluminescence (PL) of high quality GaN epitaxial layer grown on β-Si₃N₄/Si (1 1 1) substrate using nitridation-annealing-nitridation method by plasma-assisted molecular beam epitaxy (PA-MBE) was investigated in the range of 5-300 K. Crystallinity of GaN epilayers was evaluated by high resolution X-ray diffraction (HRXRD) and surface morphology by Atomic Force Microscopy (AFM) and high resolution scanning electron microscopy (HRSEM). The temperature-dependent photoluminescence spectra showed an anomalous behaviour with an ‘S-like’ shape of free exciton (FX) emission peaks. Distant shallow donor-acceptor pair (DAP) line peak at approximately 3.285 eV was also observed at 5 K, followed by LO replica sidebands separated by 91 meV. The activation energy of the free exciton for GaN epilayers was also evaluated to be ∼27.8±0.7 meV from the temperature-dependent PL studies. Low carrier concentrations were observed ∼4.5±2×10¹⁷ cm⁻³ by measurements and it indicates the silicon nitride layer, which not only acts as a growth buffer layer, but also effectively prevents Si diffusion from the substrate to GaN epilayers. The absence of yellow band emission at around 2.2 eV signifies the high quality of film. The tensile stress in GaN film calculated by the thermal stress model agrees very well with that derived from Raman spectroscopy.     

Comparison of cation adsorption by isostructural rutile and cassiterite

Macroscopic net proton charging curves for powdered rutile and cassiterite specimens with the (110) crystal face predominant, as a function of pH in RbCl and NaCl solutions, trace SrCl(2) in NaCl, and trace ZnCl(2) in NaCl and Na Triflate solutions, are compared to corresponding molecular-level information obtained from static DFT optimizations and classical MD simulations, as well as synchrotron X-ray methods. The similarities and differences in the macroscopic charging behavior of rutile and cassiterite largely reflect the cation binding modes observed at the molecular level. Cation adsorption is primarily inner-sphere on both isostructural (110) surfaces, despite predictions that outer-sphere binding should predominate on low bulk dielectric constant oxides such as cassiterite (ε(bulk) ≈ 11). Inner-sphere adsorption is also significant for Rb(+) and Na(+) on neutral surfaces, whereas Cl(-) binding is predominately outer-sphere. As negative surface charge increases, relatively more Rb(+), Na(+), and especially Sr(2+) are bound in highly desolvated tetradentate fashion on the rutile (110) surface, largely accounting for enhanced negative charge development relative to cassiterite. Charging curves in the presence of Zn(2+) are very steep but similar for both oxides, reflective of Zn(2+) hydrolysis (and accompanying proton release) during the adsorption process, and the similar binding modes for ZnOH(+) on both surfaces. These results suggest that differences in cation adsorption between high and low bulk dielectric constant oxides are more subtly related to the relative degree of cation desolvation accompanying inner-sphere binding (i.e., more tetradentate binding on rutile), rather than distinct inner- and outer-sphere adsorption modes. Cation desolvation may be favored at the rutile (110) surface in part because inner-sphere water molecules are bound further from and less tightly than on the cassiterite (110) surface. Hence, their removal upon inner-sphere cation binding is relatively more favorable.     

An efficient protocol for high-frequency direct multiple shoot regeneration from internodes of peppermint (Mentha x piperita)

A simple, repeatable and efficient protocol for direct multiple shoot regeneration from internodal explants has been defined in peppermint (Mentha x piperita var. Indus). In vitro regenerated shoots of peppermint were excised into 4 to 8 mm long internodes and cultured on Murashige and Skoog's medium supplemented with different cytokinins. In the hormonal assay, 3.0 mg L(-1) zeatin or 6-isopentenyl adenine independently supplemented to half strength MS medium exhibited multiple shoot regeneration, while thiaduzorn (0.1-3.0 mg L(-1)) showed no morphogenetic effect. A maximum of 85% in vitro cultured explants showed multiple shoot formation with an average of 7 shoots per explant on MS medium supplemented with zeatin. Multiple shoots were initiated within three weeks of cultivation. Internodes with regenerated multiple shoots were transferred to half- strength MS medium without supplementing with any plant growth hormone for shoot elongation and rhizogenesis. Rooted plants acclimatized and grew to maturity under glasshouse conditions. The plantlets developed were phenotypically identical to the parent plant and exhibited 96% survival.     

High-performance liquid chromatography method development and validation for simultaneous determination of five model compounds, antipyrine, metoprolol, ketoprofen, furosemide and phenol red, as a tool for the standardization of rat in situ intestinal permeability studies using timed wavelength detection

A simple, precise, accurate and rugged reversed-phase high-performance liquid chromatography (HPLC) method has been developed and validated for the simultaneous determination of five permeability model compounds, viz. antipyrine, metoprolol, ketoprofen, furosemide and phenol red. The method was intended to standardize rat in situ single-pass intestinal perfusion studies to assess the intestinal permeability of drugs in the market as well as new chemical entities. Optimum resolution was achieved by gradient elution on a Symmetry Shield C-18 analytical column with the mobile phase consisting of a mixture of aqueous potassium dihydrogen orthophosphate (pH 5.5; 0.01 m) and methanol at a flow rate of 1.5 mL/min. The retention times of antipyrine, metoprolol, ketoprofen, phenol red and furosemide were about 9, 12, 13, 16 and 17 min, respectively. Data acquisition was carried out using a photo diode array detector in the wavelength range 210-600 nm. Extraction of chromatograms was carried out by timed wavelength. Data obtained in all studies indicated that the method was suitable for the intended purpose. The validated method was found to be linear and precise in the working range. Suitability of storage under various conditions and freeze/thaw impact at cold temperature were established to ensure complete sample recovery without any stability issues. Recovery very close to the spiked amounts indicated that the method was highly accurate and suitable for use on routine basis.     

Multiscale modelling strategies and experimental insights for the solvation of cellulose and hemicellulose in ionic liquids

ABSTRACT

The present study investigates the dissolution behaviour of cellulose and hemicellulose in potential ionic liquids (ILs) using both the quantum chemical and experimental validation. For converging upon the recommended IL, 1428 ILs consisting of 42 cations and 34 anions were studied with the conductor like screening model for real solvents (COSMO-RS) model. Based on the infinite dilution activity coefficient of the components in IL, the selected anions and cations were visualised by observing their interactions with cellulose and hemicellulose using interaction energies, natural bonding orbital analysis and molecular dynamics simulations. The dissolution order of cellulose and hemicellulose in ILs was primarily determined by the evaluation of hydrogen bonds between the oxygen atom of anion and hydroxyl proton of cellulose/hemicellulose. From this discernible fact, the anion of the IL was observed to play a leading role in the solvation process as compared to the cation. Eventually, acetate [OAc]^– anion and 1-ethyl-3-methylimidazolium [EMIM]⁺ cation were found to be good candidates for the dissolution of cellulose and hemicellulose. This was further confirmed by the measurement of solid-liquid equilibria with cellulose and hemicellulose. The regenerated cellulose powder was then characterised by Fourier transform spectroscopy(FTIR), X-ray diffraction (XRD) and Thermal gravimetric analysis (TGA).     

LC-ESI-MS analysis of taxoids from the bark of Taxus wallichiana

LC-ESI-MS analysis was carried out for taxoid profiling of partially purified methanol extracts of the stem bark of Taxus wallichiana growing in different regions of the Himalayas (Kashmir, Himachal Pradesh, UP hills, Sikkim and Arunachal Pradesh). Cone voltage fragmentation of the protonated, ammonium or sodium cationized molecular species resulted in diagnostic fragment ions. Thus, information about the number and nature of substituents and the taxane skeleton (whether it is normal or rearranged) was readily available from the LC-ESI-MS spectra. The rearranged 11(15-->1)-abeo-taxanes showed a characteristic elimination of the hydroxyisopropyl along with an acetoxy group. The identification of the taxoids was achieved by comparison of the ESI mass spectra with those of the authentic taxoids available to us or by interpreting the ESI mass spectra. The results were also corroborated by MS/MS analysis of the partially purified extract injected directly into the ESI source. Paclitaxel, its analogues and their xylosides are present in samples from all the regions. An interesting observation is the detection of a large number of basic taxoids having nitrogen-containing side chains.     

Electrochromism in Hf-doped WO3

Journal of Solid State Electrochemistry - In the present work, we analyzed the electrochromic behavior of tungsten oxide (WO3) and effect of hafnium (Hf) doping on its performance. The...