New perovskite materials of the La(2-x)Sr(x)CoTiO6 series

Substitution of La(3+) by Sr(2+) in the double perovskite La(2)CoTiO(6) yields materials of the La(2-x)Sr(x)CoTiO(6) series showing a significant amount of trivalent cobalt ions when prepared at ambient atmosphere. The as-prepared compounds can be reduced in severe conditions retaining the perovskite structure while inducing the formation of a large amount of oxygen vacancies. The limit of aliovalent substitution in this series was found to extend up to x = 1. For substitution of La(3+) up to 15% cobalt and titanium are ordered, though the order is progressively lost as x increases; for x≥ 0.30 no ordering is observed as evidenced by magnetic measurements. The ability of these materials to present either cobalt ions in a mixed oxidation state or large amounts of anion vacancies depending on the atmosphere makes them interesting to be further investigated regarding their electrical and electrochemical properties, and hence, their usefulness in some electrochemical devices.     

New half sandwich-type Ru(II) coordination compounds characterized by the fac-Ru(dmso-S)3 fragment: influence of the face-capping group on the chemical behavior and in vitro anticancer activity

The Ru(II) complex fac-[RuCl(dmso-S)(3)(dmso-O)(2)][PF(6)] (P2) was found to be an excellent precursor for the facile preparation in high yield of half sandwich-type compounds of the general formula fac-[RuCl(dmso-S)(3)(N)(2)][PF(6)] (e.g. (N)(2) = 1,2-diaminoethane (en, 4), trans-1,2-diaminocyclohexane (dach, 5), or 2 NH(3) (6)). Neutral half sandwich-type compounds of the general formula fac-[RuCl(dmso-S)(3)(N-O)] where N-O is an anionic chelating ligand (e.g. N-O = picolinate (pic, 7)) are best prepared from the universal Ru(II)-dmso precursor cis-[RuCl(2)(dmso)(4)] (P1). These complexes, that were fully characterized in solution and in the solid state, are structurally similar to the anticancer organometallic compounds [Ru(η(6)-arene)(chel)Cl][PF(6)](n) but, in place of a face-capping arene, have the fac-Ru(dmso-S)(3) fragment. In contrast to what observed for the corresponding arene compounds, that rapidly hydrolyze the Cl ligand upon dissolution in water, compounds 4-6 are very stable and inert in aqueous solution. Probably their inertness is the reason why they showed no significant cytotoxicity against the MDA-MB-231 cancer cell line.     

Lanthanide complexes as imaging agents anchored on nano-sized particles of boehmite

The synthesis of boehmite nanoparticles modified with lanthanides (Eu, Tb and Gd) is described. Their synthesis, characterization and in vitro assays with HeLa cells were performed. The nuclear magnetic relaxation dispersion (NMRD) profiles of the two chelating moieties were studied. Imaging data from laser scanning confocal fluorescence microscopy and flow cytometry revealed that the nanoscaffolds were taken up by the cells, distributed throughout the cytoplasm and showed no toxicity. This platform could represent an alternative to silica-based inert matrices as imaging vehicles.     

Effective cell uptake of nanoassemblies of a fluorescent amphiphilic cyclodextrin and an anionic porphyrin

An emitting nanoassembly composed of a novel amphiphilic cyclodextrin functionalised with a covalently appended fluorophore and an anionic porphyrin internalizes effectively in tumor cells, allowing simultaneously the detection of carrier and photosensitiser.     

Preparation and optical properties of novel bioactive photonic crystals obtained from core-shell poly(styrene/α-<Emphasis Type="Italic">tert</Emphasis>-butoxy-ω-vinylbenzyl-polyglycidol) microspheres

Optical properties of polymer microspheres with polystyrene cores and polyglycidol-enriched shells poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol) (P(S/PGL) particles with number average diameters D _n determined by scanning electron microscopy equal 237 and 271 nm), were studied before and after immobilization of ovalbumin. The particles were synthesized by emulsifier-free emulsion copolymerization of styrene and polyglycidol macromonomer (poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol)) initiated with potassium persulfate. Molar fraction of polyglycidol units in the interfacial layer of the microspheres determined by XPS was equal 42.6 and 34.0%, for the particles with D _n equal 137 and 271 nm, respectively. Colloidal crystals from the aforementioned particles were prepared by deposition of particle suspensions on the glass slides and subsequent evaporation of water. It was found that optical properties of colloidal crystals from the P(S/PGL) microspheres strongly depend on modification of their interfacial layer by covalent immobilization of ovalbumin. The coating of particles with ovalbumin resulted in decreasing their refractive index from 1.58 to 1.52.     

Determination of major, minor and trace elements in rock samples by laser ablation inductively coupled plasma mass spectrometry: Progress in the utilization of borate glasses as targets

The present work is a continuation of a research study performed at our laboratory aiming at the multielement analysis of rock samples (basalts and shale) by inductively coupled plasma mass spectrometry in combination with laser ablation using borate glasses as analytical targets. Argon, nitrogen-argon mixtures and helium were evaluated as cell gases, the latter confirming its better performance. Different operational parameters of the laser, such as gas flow, energy, focus, scanning speed and sampling frequency were optimized. External calibration was made with standards prepared by fusion of geological reference materials (basalts 688 and BCR-2, obsidian SRM 278, and shale SGR-1) of different mass fractions in the meta-tetra borate matrix. Coefficients of determination (R²) were > 0.99 for 30 elements from o total of 40 determined. Method validation was then performed using additional certified reference materials (BHVO-2, BIR-1, SCo-1) produced as borate targets in a similar way. Accuracies were better than 10% for most of the elements studied and analytical precisions, calculated from the residual standard deviations of calibration curves were, typically, between 6% and 10%. Additionally, the semiquantitative TotalQuant® technique was applied, which gave, within the expected uncertainty for this calibration technique, concordant results when compared to the quantitative external calibration procedure. Both methods were then used for the analysis of marine shale samples, which are of great geological interest in petroleum prospecting.     

High performance liquid chromatography hyphenated to inductively coupled plasma mass spectrometry for V and Ni quantification as tetrapyrroles

A method was developed for the determination of V and Ni as tetrapyrroles by High Performance Liquid Chromatography hyphenated to Inductively Coupled Plasma Mass Spectrometry (HPLC-ICP-MS) using reversed phase and elution gradient. Chlorinated solvents and tetrahydrofuran were investigated as regard to separation time and ICP-MS detection efficiencies. The final elution gradient program started from pure methanol to a mixture of 20:80 (v/v) chloroform:methanol. External quantification of V and Ni with inorganic standards by flow injection ICP-MS, used online with HPLC, resulted in 95% of recoveries. The Limits of Detection for V during methanol elution and for Ni during the 20% chloroform gradient elution were evaluated by their minimum detectable concentrations, which were, respectively, 5 μg L^− 1 and 8 μg L^− 1. The methodology was applied to polar and resin fractions separated from a Brazilian crude oil and a sediment extract from an oil-polluted area in the Guanabara Bay, Rio de Janeiro, Brazil. Vanadium as tetrapyrroles represented the totality of V content in the polar fraction, whereas Ni was in different polar forms in the resin and sediment extract.     

Eudragit-coated albumin nanospheres carrying inclusion complexes for oral administration of indomethacin

Oral administration of indomethacin (IN) as well as drugs with low aqueous solubility usually results in poor absorption and bioavailability. The aim of this study was to prepare enteric-coated bovine serum albumin (BSA) nanospheres carrying cyclodextrin complex for IN delivery. Inclusion complex composed of IN and ??-cyclodextrin (CD) was prepared by spray-drying. Indomethacin alone and its inclusion complex were incorporated into albumin nanospheres using a coacervation method followed by thermal cross-linking. Then nanosphere suspensions were spray-dried. The inclusion complex and the nanospheres were characterized by FT-IR spectroscopy and DSC analysis. Phase-solubility diagrams and stability constants were determined at pH 2.0 and 7.4 and at different temperatures (10, 25 and 37 °C). Swelling ability of nanospheres were evaluated as well as the in vitro release behaviour at pH 2.0 and 7.4. The nanospheres were coated with Eudragit^® L-100 (EudL) or S-100 (EudS) using spray-drying to give protection in the stomach. The results showed that IN solubility can be increased by complexation with ??-CD or protein/drug interaction with albumin nanospheres. The inclusion complex loaded into BSA nanospheres provided a zero order drug release kinetic. The coating process with EudL and EudS allowed to obtain a negligible release at acidic pH without limiting drug availability at pH 7.4.     

Controlling E. coli adhesion on high-k dielectric bioceramics films using poly(amino acid) multilayers

The influence of high-k dielectric bioceramics with poly(amino acid) multilayer coatings on the adhesion behavior of Escherichia coli (E. coli) was studied by evaluating the density of bacteria coverage on the surfaces of these materials. A biofilm forming K-12 strain (PHL628), a wild-type strain (JM109), and an engineered strain (XL1-Blue) of E. coli were examined for their adherence to zirconium oxide (ZrO(2)) and tantalum oxide (Ta(2)O(5)) surfaces functionalized with single and multiple layers of poly(amino acid) polyelectrolytes made by the layer-by-layer (LBL) deposition. Two poly(amino acids), poly(l-arginine) (PARG) and poly(l-aspartic acid) (PASP), were chosen for the functionalization schemes. All three strains were found to grow and preferentially adhere to bare bioceramic film surfaces over bare glass slides. The bioceramic and glass surfaces functionalized with positively charged poly(amino acid) top layers were observed to enhance the adhesion of these bacteria by up to 4-fold in terms of bacteria surface coverage. Minimal bacteria coverage was detected on surfaces functionalized with negatively charged poly(amino acid) top layers. The effect of different poly(amino acid) coatings to promote or minimize bacterial adhesion was observed to be drastically enhanced with the bioceramic substrates than with glass. Such observed enhancements were postulated to be attributed to the formation of higher density of poly(amino acids) coatings enabled by the high dielectric strength (k) of these bioceramics. The multilayer poly(amino acid) functionalization scheme was successfully applied to utilize this finding for micropatterning E. coli on bioceramic thin films.     

Polyelectrolyte multilayers as a platform for luminescent nanocrystal patterned assemblies

The fabrication of uniform and patterned nanocrystal (NC) assemblies has been investigated by exploiting the possibility of carefully tailoring colloidal NC surface chemistry and the ability of polyelectrolyte (PE) to functionalize substrates through an electrostatic layer-by-layer (LbL) strategy. Appropriate deposition conditions, substrate functionalization, and post-preparative treatments were selected to tailor the substrate surface chemistry to effectively direct the homogeneous electrostatic-induced assembly of NCs. Water-dispersible luminescent NCs, namely, (CdSe)ZnS and CdS, were differently functionalized by (1) ligand-exchange reaction, (2) growth of a hydrophilic silica shell, and (3) formation of a hydrophilic inclusion complex, thus providing functional NCs stable in a defined pH range. The electrostatically charged functional NCs represent a comprehensive selection of examples of surface-functionalized NCs, which enables the systematic investigation of experimental parameters in NC assembly processes carried out by combining LbL procedures with microcontact printing and also exploiting NC emission, relevant for potential applications, as a prompt and effective probe for evaluating assembly quality. Thus, an ample showcase of combinations has been investigated, and the spectroscopic and morphological features of the resulting NC-based structures have been discussed.