Comparison of USAXS information with RMSA prediction for the effect of added salt on colloidal crystal structure

Charged colloidal particles form so‐called colloidal crystals in dispersions because of electrostatic interparticle interactions between them. We performed a systematic and quantitative investigation of the effect of salt on the interparticle distance in colloidal crystals with the ultra‐small‐angle X‐ray scattering (USAXS) technique. We accumulated a great deal of significant information about the mechanism of the colloidal crystal formation by USAXS. We found that the interparticle distance in colloidal crystals shows a maximum as a function of the added salt concentration. The maximum position of the interparticle distance was located around κa = 1.3 (κ⁻¹ is the Debye length, and a is the particle radius). The behavior of the decrease of the interparticle distance with the increase of the added salt concentration at κa > 1.3 could be explained not quantitatively but qualitatively with the effective hard‐sphere theory. Thus, it was suggested that the dependence of the interparticle distance on the salt concentration at κa > 1.3 was reasonable according to the classical theories, such as the Derjaguin–Landau–Verwey–Overbeek (DLVO) theory. In this article, we advance this theoretical approach with the classical theory, that is, with the assumption of the only repulsive force for the interparticle interaction, to elucidate the origin of the curious behavior of the interparticle distance. We estimated the structure factor by the rescaled mean spherical approximation (RMSA) with a Yukawa‐type interparticle interaction potential. A comparison between the prediction of the RMSA data and USAXS experimental data was performed. In this analysis, the charge renormalization procedure was applied. Although the origin of the behavior of the interparticle distance at κa < 1.3 is still a mystery, we concluded that the behavior at κa > 1.3 could be interpreted as a result from the DLVO manner. The effective surface charge number was on the order of several percentages of the analytical surface charge number. This experimental fact certainly proves the validly of our USAXS observation quantitatively and also predicts the existence of novel factors for κa ≤ 1.3, the real origin of colloidal crystal formation, which have never been taken into account previously. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 78–90, 2001     

Synthesis of anionic amphiphilic carbosilane block copolymer: Poly(1,1‐diethylsilacyclobutane‐block‐methacrylic acid)

An amphiphilic block copolymer of silacyclobutane and methacrylic acid (MAA) was synthesized via a living anionic polymerization of 1,1‐diethylsilacylcobutane (EtSB). Sequential addition of 1,1‐diphenylethylene and t‐butyl methacrylate (tBMA) to living poly(EtSB) in the presence of lithium chloride gave poly(EtSB‐block‐tBMA) with narrow molecular weight distributions. The t‐butyl ester groups in the obtained polymer were readily hydrolyzed via heating in 1,4‐dioxane in the presence of concentrated aqueous hydrochloric acid. The block copolymer with a short MAA segment was soluble in chloroform and insoluble in methanol and basic water, whereas the block copolymer with a long MAA segment was soluble in methanol and basic water and insoluble in chloroform. The block polymer (EtSB/tBMA = 45/60) formed a monolayer film on the water surface; this was confirmed by surface pressure measurement. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 86–92, 2001     

Evanescent Wave Light Scattering A Fusion of the Evanescent Wave and Light Scattering Techniques to the Study of Colloids and Polymers Near the Interface

The evanescent wave light scattering technique, which is produced by a fusion of the evanescent wave technique and light scattering technique, is a very powerful and useful tool for investigation of colloidal particles and polymers near the surface and interfaces. We have developed two kinds of evanescent wave light scattering apparatuses. One is the evanescent wave dynamic light scattering (EVDLS) technique and the other is the evanescent wave light scattering microscope (EVLSM). By EVDLS, the diffusion behavior of a colloidal particle near the interface can be extracted quantitatively as a function of the distance from the interface. The diffusion coefficient was smaller than those for particles in bulk, reflecting electrostatic and hydrodynamic interactions. By EVLSM, the interaction potential profile between a colloidal particle and the surface in dispersion can be evaluated directly. EVLSM will play an important role in colloidal interaction studies, especially at a low ionic strength. It is also pointed out that a particle dynamics study is also possible by the EVLSM technique. A new field will be developed in colloid science and polymer science by application of the evanescent wave light scattering technique, i. e. a fusion of the evanescent light and a light scattering techniques.     

Photo-tunable Stationary Phases for Semi-micro HPLC

To develop photo-tunable chromatography, several azobenzene derivatives were immobilized or modified on silica gels or incorporated into polymers. The supports prepared were used as stationary phases in semi-micro HPLC, and the photo-dependence of their retention evaluated. On these stationary phases, the retention measured with 2-propanol in hexane was increased by UV irradiation; in contrast, the retention was decreased when methanol was used as mobile phase. It was assumed that the polarity of the stationary phase increases when the molecular structure of the azobenzene moieties changes from the trans to the cis form. On irradiation of the column with visible light after UV irradiation and with methanol as mobile phase, the change of retention proved to be reversible. However, this reverse change was less dramatic than the initial change. Such retention behavior is attributable to photo-isomerization of the azobenzene moieties. These findings will be exploited in our development of new photo-tunable stationary phases and new photo-controlled separation systems.     

Optical-limiting property of cyclic phenylacetylene oligomer synthesized under high pressure

The optical-limiting property of a new cyclic phenylacetylene oligomer was investigated. Toluene solutions of the oligomer contained within a quartz cell were irradiated with the pulse from frequency doubled Nd: Yag laser at 532 nm. At low input fluence, the transmittance of the toluene solution was constant and agreed well with that obtained by spectrophotometer. At high input fluence, the transmittance of the solution above a concentration of 5 wt % decreased with input fluence. The oligomer had an optical limiting property. As the concentration of the oligomer increased from 5 to 20 wt %, the threshold for optical limiting decreased. The threshold was independent of the molecular weight. The optical limiting property was analyzed by the following equation obtained according to the reverse saturable absorption mechanism; log(I₀/I) = K(I₀ - I) + A_g, where I₀ is the input fluence, I is the output fluence, K is a parameter depending on the absorption cross section and the relaxation time, and A_g is the absorbance of the ground state. © 1996 John Wiley & Sons, Inc.     

Variation in the Isospecific Active Sites of Internal Donor‐Free MgCl2‐Supported Ziegler Catalysts: Effect of External Electron Donors

The stopped‐flow polymerization of propylene was carried out using an internal donor‐free MgCl₂‐supported Ziegler catalyst in the absence or presence of external electron donors. The variation in the isospecific active sites was investigated based on the isotacticity distribution of the poly(propylene) analyzed by the TREF method. Highly isospecific active sites derived from the highest isotactic fraction (elution temperature by TREF: >112 °C) exist in the electron donor‐free catalyst system. The addition of external electron donors converted parts of the aspecific into isospecific active sites, but showed no effects on the highest isospecific active sites. The external electron donor sterically affects a coordination vacancy of each aspecific titanium species and, consequently, transfers it into an isospecific active site of high, but not highest isospecificity.     

Kinetic evaluation of various isospecific active sites on MgCl2-supported Ziegler catalysts

The formation, variation and conversion of isospecific active sites were investigated, based on the isotacticity distribution of the polypropenes analyzed by the temperature rising elution fractionation (TREF) method. Stopped-flow polymerization of propene was carried out with a MgCl₂-supported Ziegler catalyst in the absence or presence of an internal or external electron donor so that the effects and roles of the electron donors could be clarified. The results showed that various kinds of active sites with different isospecificities, including the highest isospecific active sites responsible for producing the highest isotactic fraction (elution temperature: > 112°C) existed, even in the electron donor-free catalyst system. The isospecificity of the active sites in the donor-free catalyst might have originated from a surface monolayer multinuclear titanium species, namely an “island” of titanium species. The addition of the external electron donor converted a part of the aspecific and/or low isospecific active sites into the second highest isospecific active sites, but showed no effect on the formation of the highest isospecific active sites, whereas the addition of an internal donor played an important role in creating the highest isospecific active sites as well as suppressing the formation of the aspecific active sites.