萜类化合物13C NMR化学位移的定量构谱相关研究

利用原子电性作用矢量(Atomic electro-negativity interaction vector,AEIV)和原子杂化状态指数(Atomic hybridization state index,AHSI)对萜类化合物中的C原子进行结构表征并与其核磁共振碳谱(13C NMR)建立了优良的定量构谱相关(QSSR)模型.其中29个单萜类化合物中的290个C原子建模的计算值经留一法(Leave-one-out,LOO)交互校验(Cross-validation,CV)预测值的复相关系数(R)分别为0.9900和0.9867,进一步使用倍半萜、二萜、三萜化合物分子中65个C原子的13C NMR化学位移值来检测该模型的稳定性,模型预测值和观测值间复相关系数(R)为0.9777,取得了令人满意的结果.     

磷钼酸铵-孔雀绿-PVA分光光度法测定钽粉中磷

提出了以磷钼酸铵-孔雀绿-PVA三元络合物体系测定金属钽粉中磷的方法,该体系表观摩尔吸光系数ε=8.19×104L.mol-1.cm-1,加标回收率为:99.3%~105%,方法的RSD为:5.9%。有效地解决了目前高纯钽粉中磷的分析难题,方法已应用于实际产品的分析中。     

SO_4~(2-)/TiO_2固体超强酸新制备方法及其对形成邻苯二甲酸二丁酯的催化活性

建立了用钛白粉制备固体超强酸SO42-/TiO2的新方法.考察了超强酸SO42-/TiO2的制备条件对催化邻苯二甲酸酐和正丁醇酯化反应的催化活性的影响.实验表明,以合成的超强酸为催化剂,在160℃反应4h,邻苯二甲酸二丁酯的产率大于99%.     

Synthesis,Structure and Photoluminescence of Co-crystal of Bis[2-(benz(oxa/imida)zol-2-yl)phenolato-κ2N,O]zinc(Ⅱ) Being Site Occupancy Disorder with a Heteroatom Ratio of NH to O (0.408/0.592)

The zinc(Ⅱ) complex with Hpbx (Hpbx = 2-(benzoxazol-2-yl)phenol) and Hpbm (Hpbm=2-(benzimidazol-2-yl)phenol),namely[Zn(pbm)2]1.633[Zn(bpx)2]2.367·DMF·2H2O1,has been synthesized and characterized by X-ray crystallography,FTIR and elemental analysis.The coordination structures are statistically disordered and can be regarded as a co-crystal of [Zn(pbm)2]and [Zn(pbx)2] with the ratio of ca.0.408/0.592.Solvate water and DMF molecules are also present in the lattice.Crystal data for 1:monoclinic,space group P21/c,Mr= 2049.02,Z = 2,α = 9,7571(6),b = 25.6415(16),c = 19.8675(10)(A),β = 111.342(2)°,V = 4629.7(5) (A)3,Dc = 1.470 g/cm3,μ =1.100 mm-1,F(000) = 2104,R = 0.0575 and wR = 0.1282 for 5528 observed reflections (I＞ 2σ(I)).The photoluminescent spectra for this compound have also been studied.     

介孔铁铝/蒙脱土复合材料：解离柱撑制备、结构及催化羟基化性能

利用极稀悬浮液中蒙脱土的解离作用并结合柱化技术过程，制备了介孔结构的铝铁/蒙脱土复合材料(Fe-Al/mmt)；并采用粉末X射线衍射、氮等温吸脱附、傅立叶红外光谱、紫外可见光漫反射光谱及苯酚催化羟基化反应表征了其结构和性能。结果显示，铁铝聚合前驱液中铁/铝比影响复合材料中蒙脱土的解离程度，且仅当低铁/铝比时(即Fe/(Fe+Al)物质的量的比介于0.05～0.3)，嵌入解离的蒙脱土片层间的混合铁铝物种呈现能耐温350 ℃的热稳定性；氮等温吸脱附分析反映出这种解离的蒙脱土堆积结构呈现介孔特征，孔径分布窄，介于2.0～2.3 nm；红外分析表明材料表面具有L酸和B酸位，并且L酸位量与嵌入解离的蒙脱土结构中的混合铁铝物种相关；由于结构中混合铁铝物种的存在及相应的Si-O → Fe、Al-O → Fe间的电子跃迁，Fe-Al/mmt材料在紫外区呈现宽泛的能量吸收特征。这些结果说明，由于混合铁铝物种嵌入于解离的蒙脱土片层堆积结构中，形成了“卡片屋”式介孔结构。实验条件下，Fe/(Fe+Al)物质的量的比为0.3的Fe-Al/mmt呈现较佳的催化羟基化性能，苯酚转化率为36.7%，二酚产物选择性32.3%；并且初步表明铝掺杂后，通过铁铝比和表面酸性的调整，材料的部分选择氧化性能可以得到改善。     

ICP-AES法同时测定TiNi形状记忆合金中杂质Co、Cu、Cr、Fe、Nb

研究建立了ICP—AES同时测定TiNi形状记忆合金中Co、Cu、Cr、Fe、Nb5元素的方法。进行了必要的条件试验，选择了分析线及其他仪器工作参数；考察了方法检出限、H2SO4酸度及基体钛、镍对测定的影响、工作曲线线性。进行了准确度和精密度试验，各元素的加标回收率为Co98．4％。99．6％、Cu98．0％～103％、Cr98.9％～99．6％、Fe94．6％～95．8％、Nb99．8％。102％。5种元素的相对标准偏差范围为4．2％-10％。     

牛血清白蛋白与甲基橙结合反应的研究

用分光光度法研究了牛血清白蛋白与甲基登在酸性溶液中的结合反应，认为两者通过非共价键结合，研究了溶液吸光 度与组分浓度的关系，对Ｓｃａｔｃｈａｒｄ模型用于自理蛋白质染色反应时存在的总是作了讨论，提出了表观结合常数的概念，推导了求算表观结合常数和最大结合数的线性回归公式。     

用X-射线衍射法测定聚对苯二甲酸乙二醇酯/聚对苯二甲酸丁二醇酯共混体系的结晶度

Based on Hermans and Weidinger postulate that the crystalline fraction is proportional to crystalline intensity Ic and that the amorphous fraction is proportional to amorphous intensity Ia, it is. Suggseteet that for PBT/PET blends we assume that the intensity at 18. 2° is completely originated from amorphous scattering. The separation between the peaks at 17. 2° and 20. 8° is 3. 6°m, which is regarded as large enough to justify this assumption. Thus , it is possible to draw an acceptable demaraction line between the crystalline and amorphous scattering. The degree of crystallinity Xc is given by X_c-I_c/(I_c+KI_a),coefficient K is available by the values of Ic plotted against the values of Ia.For PBT/PET blends,we obtain that K is 0.95 and that correlation coefficient is 0.92 According to the method revieved above,we investi-gated the crystallinity of PBT/PET blends prepared by different ways.     

多组分体系同时定性定量测定的逐步回归分析法

阐述了逐步回归分析法用于多组分体系同时定性定量分析的原理、实验及数据处理方法。分析了硝基酚类人工样、未知样及合成样。该法可用于仅知可能含有的组分范围的样品分析。     

Formation and Structure of [Al_(13)(μ_3-OH)_6(μ_2-OH)_6(μ_2-OH)_(12)(H_2O)_(24)]Cl_(15)·13H_2O

1 INTRODUCTION At present, the polyaluminium compounds are mainly studied by single-crystal X-ray diffraction method to obtain the components, structures and exis- tence forms of aluminium in hydrolysis system, and then hydrolysis courses and mechanisms of each hydrolytic polyaluminium cation could be further dis- closed[1～5]. Generally, the single crystals suitable for X-ray diffraction are obtained from the crystallization of polyaluminium cations into sulfates or selenates. Following …