Copolyimides containing alicyclic and fluorinated groups: Characterization of the film microstructure

The microstructures of a series of copolyimide films were characterized with different experimental methods such as density measurements, X‐ray diffraction, ultraviolet‐visible spectrophotometry, positron annihilation spectroscopy, and dynamic mechanical analysis. The experimental data were linked to the chemical structures of the polymers and especially the alicyclic and fluorinated monomers. Some analysis responses were directly dependent on the fluorine atoms and, therefore, did not provide clear information about the microstructures. The chain organization in the amorphous films appeared to be significantly dependent on the effect of the casting solvent. The influence of the alicyclic group content was quite significant for a nonsubstituted diamine but was strongly attenuated with a fluorinated diamine. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2998–3010, 2003     

MixingC rmaps of the interval without maximal measure

We construct aC ^rtransformation of the interval (or the torus) which is topologically mixing but has no invariant measure of maximal entropy. Whereas the assumption ofC ^∞ ensures existence of maximal measures for an interval map, it shows we cannot weaken the smoothness assumption. We also compute the local entropy of the example.     

Action de l'acide fluorhydrique sur les azirines : synthèse d'α-fluorocétones et de difluoroamines - étude de l'orientation de la réaction

Addition of Olah's reagent in benzene or methylene chloride to azirines leads to the formation of difluoroamines or α-fluoroketones. This reaction has been applied to the synthesis of 17 α-fluoropregnenolone. The formation of fluoroketone proceeds via a cationic intermediate. Yield is improved when using a more nucleophilic fluorinating reagent obtained by addition of triethylamine to Olah's reagent.     

Photochemical reactivity of trifluoromethyl aromatic amines: the example of 3,5-diamino-trifluoromethyl-benzene (3,5-DABTF)

This work presents the application of an on-line photoreactor to the detection of 3,5-diamino-trifluoromethyl-benzene (3,5-DABTF) in aqueous solutions. When irradiated at 310 nm, this compound is defluorinated to 3,5-diaminobenzoic acid by a nucleophilic substitution of the fluoride by water. Concomitantly, defluorination intermediates polymerize through amide bonds to give dark-colored compounds. We take advantage of the photocatalyzed defluorination and the subsequent decrease in pH to develop an original and specific photoreactor. Continuous recording of pH and temperature in the outlet of the reactor by a dual electrode gives us an opportunity to optimize the system. In the photoreactor, 3,5-DABTF is immediately and totally transformed as attested by the rapid drop of the flowing solution pH from 6.2 to 3.2 and the chromatographic analysis of the outgoing solutions. The detection remains effective from 1 to 1000 parts per million.     

Theoretical description of the electronic structure of the alkali hydride cation NaH+

A theoretical determination of the electronic structure of NaH+ is presented. Potential energy curves and dipole moments have been computed for 48(2)Lambda(+) electronic states (i.e., correlated adiabatically up to Na(6s) + H+) through a model-potential-type method over a wide range of R. Equilibrium distances, transition energies, depths of wells, and/or heights of humps predicted at short and large interatomic separations are reported and compared with available experimental and theoretical values. Variations of the static dipole polarizabilities versus internuclear distance have been determined for the two lowest states.     

Orienting the Demixion of a Diblock‐copolymer Using 193 nm Interferometric Lithography for the Controlled Deposition of Nanoparticles

DUV interferometric lithography and diblock copolymer self‐organization have successfully been combined to provide a simple and highly collective nanopatterning technique enabling the organization of nanoparticles over several orders of magnitude, from nanometre to millimetre. The nanostructural changes at the surface of the polymer film after thermal annealing have been monitored by AFM and the process parameters optimized for obtaining a long‐range organization of the lamellar domains. In particular, the impact of the annealing conditions and geometric parameters of the substrate patterns have been investigated. The nanopatterns resulting from the lamellar demixion of (PS‐b‐MMA) were used for a controlled deposition of nanoparticles. The affinity of the hydrophobic particles for the PS block was demonstrated, opening new doors towards the preparation of high‐density arrays of nanoparticles with potential applications in data storage.

     

Complexation of dimethylmagnesium with alpha-diimines; structural and EPR characterisation of single electron and alkyl transfer products

Treatment of dimethylmagnesium with the alpha-diimine ligands Ar'N=C(R)C(R)=NAr' [R = naphth-1,8-diyl (1), H (2), CH3 (3); Ar' = 2,6-diisopropylphenyl] in diethyl ether provides the neutral methyl-bridged dimeric complexes [(alpha-diimine-.)Mg+(mu-CH3)]2 via single electron transfer (SET) to the coordinated diimine and elimination of a methyl radical. These biradical species have been characterised by EPR spectroscopy and, for the ligand , X-ray crystallography. In the presence of THF the reaction of ligand proceeds to the diamagnetic [(ene-1,2-diamide)Mg(THF)3] complex in which the diimine ligand has been doubly reduced to an ene-diamide by two successive SET processes. Comparison of the structural data for the free ligand with that obtained for the alpha-diimine radical anion and ene-diamide complexes shows the expected increases in C-N, and decreases in C-C, bond lengths within the N-C-C-N unit consistent with the progressive reduction of the ligand. In the case of ligand , reaction at low temperature provides the complex [Mg(mu2-Me){Ar'NC(Me)2C(Me)NAr'}]2 in which methyl transfer to a ligand imine carbon atom has occurred. This species has also been structurally characterised. This contrasts with the formation of the radical species at room temperature, and indicates the involvement of an intermediate in which the radical products of the SET process are held in close proximity by the solvent cage. Two competing processes of methyl radical escape and methyl transfer to the ligand account for the formation of the observed products at different temperatures.     

Maximal regularity for the Lamé system in certain classes of non-smooth domains

The aim of this article is twofold. On the one hand, we study the well-posedness of the Lamé system ${-\mu\Delta-\mu'\nabla{\rm div} }The aim of this article is twofold. On the one hand, we study the well-posedness of the Lamé system -mD-m￠?div{-\mu\Delta-\mu'\nabla{\rm div} } in L ^q (Ω), where Ω is an open subset of \mathbbRⁿ{{\mathbb{R}}^n} satisfying mild regularity assumptions and the Lamé moduli μ, μ′ are such that μ > 0 and μ + μ′ > 0. On the other hand, we prove the analyticity of the semigroup generated by the Lamé operator as well as the maximal regularity property for the time-dependent Lamé system equipped with a homogeneous Dirichlet boundary condition based on off-diagonal estimates.     

Green ultrasound-assisted extraction of carotenoids based on the bio-refinery concept using sunflower oil as an alternative solvent

A green, inexpensive and easy-to-use method for carotenoids extraction from fresh carrots assisted by ultrasound was designed in this work. Sunflower oil was applied as a substitute to organic solvents in this green ultrasound-assisted extraction (UAE): a process which is in line with green extraction and bio-refinery concepts. The processing procedure of this original UAE was first compared with conventional solvent extraction (CSE) using hexane as solvent. Moreover, the UAE optimal conditions for the subsequent comparison were optimized using response surface methodology (RSM) and ultra performance liquid chromatography – diode array detector – mass spectroscopy (UPLC–DAD–MS). The results showed that the UAE using sunflower as solvent has obtained its highest β-carotene yield (334.75 mg/l) in 20 min only, while CSE using hexane as solvent obtained a similar yield (321.35 mg/l) in 60 min. The green UAE performed under optimal extraction conditions (carrot to oil ratio of 2:10, ultrasonic intensity of 22.5 W cm^?2, temperature of 40 °C and sonication time of 20 min) gave the best yield of β-carotene.