Square wave adsorptive stripping voltammetric determination of famotidine in urine

Electrochemical studies of famotidine were carried out using voltammetric techniques: cyclic voltammetry, linear sweep and square wave adsorptive stripping voltammetry. The dependence of the current on pH, buffer concentration, nature of the buffer, and scan rate was investigated. The best results for the determination of famotidine were obtained in MOPS buffer solution at pH 6.7. This electroanalytical procedure enabled to determine famotidine in the concentration range 1 × 10⁻⁹–4 × 10⁻⁸ mol L⁻¹ by linear sweep adsorptive stripping voltammetry (LS AdSV) and 5 × 10⁻¹⁰–6 × 10⁻⁸ mol L⁻¹ by square wave adsorptive stripping voltammetry (SW AdSV). Repeatability, precision and accuracy of the developed methods were checked. The detection and quantification limits were found to be 1.8 × 10⁻¹⁰ and 6.2 × 10⁻¹⁰ mol L⁻¹ for LS AdSV and 4.9 × 10⁻¹¹ and 1.6 × 10⁻¹⁰ mol L⁻¹ for SW AdSV, respectively. The method was applied for the determination of famotidine in urine.     

[Hg2(μ‐bpe)(μ‐OAc)2(μ‐SCN)2]n,a New Two‐Dimensional Coordination Polymer Involving Three Simultaneously Bridging Ligands: 1,2‐Bis(4‐pyridyle)ethene,Acetate, and Thiocyanate

A new mercury(II) complex of 1,2‐bis(4‐pyridyle)ethene (bpe) with anionic acetate and thiocyanate ligands has been synthesized and characterized by elemental analysis, IR, ¹H NMR and ¹³C NMR spectroscopy. The single crystal X‐ray analysis shows that the complex is a two‐dimensional polymer with simultaneously bridging 1,2‐bis(4‐pyridyle)ethane, acetate and thiocyanate ligands and basic repeating dimeric [Hg₂(μ‐bpe)(μ‐OAc)₂(μ‐SCN)₂] units. The two‐dimensional system forms a three‐dimensional network by packing via π‐π stacking interactions.     

Thermal decompositions of some divalent transition metal complexes of triethanolamine

The thermal behaviours of the Ti(II), Mn(II), Fe(II), Ni(II), Cu(II) and Zn(II) complexes of triethanolamine were studied by means of thermogravimetry, differential thermogravimetry, differential thermal analysis infrared spectrophotometry and elemental analysis. The sequence of thermal stability of the metal complexes, determined by using the initial decomposition temperature, was found to be Ti(II)?Mn(II)>Fe(II)>Ni(II)>Zn(II)>Cu(II). Some of the kinetic parameters, such as the activation energy and order of reaction for the initial decomposition reaction, were calculated and the relationship between the thermal stability and the chemical structure of the complexes is discussed.     

Synthesis,spectral, thermal and structural characterization of {[Cu(H2O)3][Cu(MAL)2] · 2H2O}∞ and [Cu(MAL)(TEA)] · H2O (MAL = malonate and TEA = triethanolamine)

A polymeric malonato-bridged copper(II) complex, {[Cu(H₂O)₃][Cu(MAL)₂]· 2H₂O}, and a mononuclear malonato-copper(II) complex with triethanolamine, [Cu(MAL)(TEA)]·H₂O, have been prepared and characterized by elemental analyses, i.r., u.v.–vis, magnetic measurements and single crystal X-ray diffraction. The polymeric complex consists of one-dimensional chains containing the MAL bridged [Cu(H₂O)₃]²⁺ and [Cu(MAL)₂]^2– ions and each MAL ligand simultaneously exhibits chelating bidentate (at one copper atom) and bridging (at the adjacent copper atom) coordination modes. The intrachain Cu1...Cu2 separation is 4.963 Å and the polymeric complex exhibits antiferromagnetic behaviour. In the mononuclear complex, the copper(II) ion is octahedrally coordinated by one bidentate MAL and one tetradentate neutral TEA ligands. The i.r. spectra and thermal decompositions of both complexes are described.     

Anomalous NMR behavior of meso compounds with remote stereogenic centers on addition of chiral shift reagent or chiral solvating agent

A problem has arisen in using chiral shift reagents (CSR) and chiral solvating agents (CSA) to determine meso and racemic forms of diastereoisomers in which the stereogenic centers of the molecules are separated by achiral spacers. It is found that NMR signals of both meso and racemic forms of diastereoisomers may exhibit doubling on addition of CSR/CSA, which means that unequivocal assignments cannot be made without characterizing the effects for separate meso and racemic forms; this is particularly important for additions of CSR/CSA at relatively low concentrations, which always result in the splitting of some NMR signals of diastereoisomers. The phenomenon is demonstrated in the (31)P NMR spectra of meso and racemic forms of three spermine-bridged gem-disubstituted cyclotriphosphazatrienes, 1a-c, and compared with analogous achiral molecules, the per-substituted spermine-bridged cyclotriphosphazatrienes 2a-d. As expected, only one set of (31)P NMR signals was observed for the achiral compounds 2a-d, even on addition of CSA. Two sets of (31)P NMR ABX multiplets corresponding to meso and racemic diastereoisomers were observed for compounds 1a-c; on addition of CSA, the signals of at least one of the multiplets for each compound separated into more than the expected groups of three lines with an intensity distribution of 2:1:1. To understand this phenomenon, the meso and racemic forms of 1a and 1b and the meso form of 1c have been separated and characterized by X-ray crystallography. On addition of CSA to the racemic forms of 1a and 1b, the (31)P NMR spectrum shows the expected doubling of signals, but, unexpectedly, the same is observed for each of the meso forms of 1a-c. Analogous results using both CSA and CSR have been obtained for the meso and racemic forms of the diastereoisomeric piperazine-bridged macrocyclic-phosphazene compound, 3, whereas no effect was observed for the two meso forms of the doubly bridged macrocyclic-phosphazene compound 4. The phenomenon of doubling of the (31)P NMR signals of the meso form of singly bridged cyclotriphosphazatrienes, 1a-c and 3, is explained by consideration of the equilibrium in solution of independent complexation of a chiral ligand with molecules that have two chiral cyclophosphazene moieties separated by an achiral spacer group. The results show that the stereogenicity of such diastereoisomeric molecules in solution cannot be characterized unequivocally by NMR measurements on addition of either CSR or CSA.     

Sensitive Flow-Injection Electrochemical Determination of Hydrogen Peroxide at a Palladium Nanoparticle-Modified Pencil Graphite Electrode

A novel flow-injection amperometric method was proposed for the sensitive and enzymeless determination of hydrogen peroxide based on its electrocatalytic reduction at a palladium nanoparticle-modified pretreated pencil graphite electrode in a laboratory-constructed electrochemical flow cell. Cyclic voltammograms of the unmodified and modified electrodes were recorded in pH 7.0 phosphate buffer containing 0.10 M KCl at a scan rate of 50?mV s^?1 for the investigation of electrocatalytic reduction of hydrogen peroxide at the palladium nanoparticle-modified pretreated pencil graphite electrode. Cyclic voltammograms of the pretreated pencil graphite electrode revealed an irreversible oxidation peak and a weak reduction peak of hydrogen peroxide at +1100?mV and –450?mV vs. an Ag/AgCl/KCl saturated reference electrode. However, the reduction of hydrogen peroxide was observed at –100?mV with an increase in current in the cyclic voltammograms of the palladium nanoparticle-modified pretreated pencil graphite electrode compared to the unmodified electrode. These results indicate that the palladium nanoparticle-modified pretreated pencil graphite electrode exhibits efficient electrocatalytic activity for the reduction of hydrogen peroxide. A linear concentration range was obtained between .01 and 10.0?mM hydrogen peroxide with a detection limit of 3.0 µM from flow injection amperometric current–time curves recorded in pH 7.0 phosphate buffer at –100?mV and a 2.0?mL min^?1 flow rate. The novelty of this work relies on its use of a laboratory-constructed flow cell constructed for the pencil graphite electrode using these inexpensive, disposable, and electrochemically reactive modified electrodes for the amperometric determination of hydrogen peroxide in a flow injection analysis system.     

Monoclinic and triclinic concomitant polymorphs of di‐μ‐pyridazine‐1κ2N:2κ2N′‐bis­[(saccharinato)silver(I)]

Crystallization of the title compound, di‐μ‐pyridazine‐1κ²N:2κ²N′‐bis­[(2,3‐dihydro‐3‐oxobenzisosulfonazolato‐κN)silver(I)], [Ag₂(C₇H₄NO₃S)₂(C₄H₄N₂)₂], from acetonitrile yields both monoclinic, (I), and triclinic, (II), polymorphs. In both forms, the silver(I) ions have a slightly distorted trigonal AgN₃ coordination geometry and are doubly bridged by two neutral pyridazine (pydz) ligands, generating a centrosymmetric dimeric structure. The saccharinate (sac) ligands are N‐coordinated. The dihedral angles between the sac and pydz rings are 8.43 (7) and 7.94 (8)° in (I) and (II), respectively, suggesting that the dimeric mol­ecule is nearly flat. The bond geometry is similar in both polymorphs. In (I), the dimers inter­act with each other via aromatic π_sac–π_pydz stacking inter­actions, forming two‐dimensional layers, which are further crosslinked by weak C—H⋯O inter­actions. Compound (II) exhibits similar C—H⋯O and π–π inter­actions, but additional C—H⋯π and π⋯Ag inter­actions help to stabilize the packing of the dimers.     

Raman Spectroscopy Investigation of Nano Hydroxyapatite Doped with Yttrium and Fluoride Ions

In this study, nano hydroxyapatite doped with yttrium (2.5, 5, and 7.5 mol%) and fluoride (2.5 mol%) ions were synthesized by precipitation method and sintered at 900°C, 1100°C, and 1300°C. Raman spectroscopy was applied to track the structural modifications in pure and doped hydroxyapatites. The results showed that the main characteristic band of pure hydroxyapatite at 963 cm^?1 was not affected significantly by ion doping but exhibited higher intensity with increasing sintering temperature. Due to fluoride substitution, the 1048 and 1034 cm^?1 bands of pure hydroxyapatites appeared with a wavenumber shift in the spectra of ion-doped hydroxyapatites. The 333 cm^?1 band of pure hydroxyapatite disappeared and an additional calcium–fluor bond at 322 cm^?1 was observable in ion-doped hydroxyapatites. Two fluorescence bands at 770 and 697 cm^?1, which were also observed in the spectra of pure hydroxyapatites, shifted to higher wavenumbers in the spectra of ion-doped hydroxyapatites. This was considered to result from the perturbation in the hexagonal structure of hydroxyapatite due to yttrium and fluoride codoping.     

Nanocomposites based on crosslinked polyacrylic latex/silver nanoparticles for waterborne high‐performance antibacterial coatings

Functional polymer/AgNPs nanocomposites have been prepared. Silver nanoparticles (NPs) were synthesized to which polyacrylamide, PAAm, was covalently bound. PAAm was synthesized via a RAFT reaction and carried thiol and carboxylic acid end groups. Thiol was used to bind the polymer to the metal surface and carboxyl for further reactions. The AgNPs were used in a post‐crosslinking reaction with a separately synthesized poly(butyl acrylate‐co‐methyl methacrylate)/polyglycidyl methacrylate core/shell latex bearing epoxy functional groups. Dynamic mechanical analysis showed that the functional AgNPs effectively crosslinked the latex polymer, and that the final product had excellent mechanical strength. Antibacterial tests revealed that the nanocomposite films had strong antibacterial activity against all types of the bacteria and the immobilization of silver NPs by crosslinking retarded the release of silver in comparison to the uncrosslinked ones. With the presented method, it is possible to obtain ductile antibacterial nanocomposites to be used as waterborne functional coatings. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1435–1447     

Synthesis of Chiral Calix[4]arene Derivative and Evaluation of its Recognition Properties

The article describes the synthesis and extraction properties of a new chiral calix[4]arene Schiff base ligand 5, which has been synthesized from 5,17-diformyl-25,27-bis-(4-nitrobenzyloxy)-26,28-dihidroxycalix[4]arene (4) by treatment with (S)-(-)-1-phenylethylamine. In this synthesis, it was thought to explore the role of chiral, as well as Schiff base sites in the recognition of targeted species ions (such as dichromate anions) as well as neutral/chiral molecules. At low pH, the ligand 5 is more effective for transferring the dichromate anions from an aqueous into a dichloromethane layer; may be due to the protonation of nitrogen atoms.

The extraction properties of ligand 5 towards the some selected α -amino acid methylesters are also reported. However, the ligand 5 did not display any selectivity towards the selected α-amino acid methylesters.