Preparation and characterization of Cu (II) supported on poly(8‐hydroxyquinoline‐p‐styrene sulphonate) and its application as catalyst for the synthesis of hexahydroquinolines

Cu ( II ) supported on poly(8‐hydroxyquinoline‐p‐styrenesulfonate) (Cu ( II )@PHQSS) was prepared and fully characterized by the different techniques including fourier transform infrared spectroscopy (FT‐IR), ¹H NMR, ¹³C NMR, thermal gravimetric analysis (TGA), differential thermal gravimetric (DTG), differential thermal analysis (DTA), scanning electron microscope (SEM) and energy dispersive X‐ray analysis (EDS). Afterward, the Cu ( II )@PHQSS as nanostructured catalyst was used as catalyst for the synthesis of hexahydroquinolines.     

Redox behavior of juglone in buffered aq.: Ethanol media

The present work reports the redox mechanism of 5-hydroxynaphthalene-1,4-dione (HND), commonly known as juglone, in buffered aqueous media having 50% of ethanol. HND followed different mechanistic routes depending upon the pH of the media and more than one pK_a were evaluated from the changes in the slope of the E_p vs. pH plot. The change of pH from acidic to neutral conditions was found to switch the mechanism from CEC to EE mechanism. Pulse techniques were utilized to determine the number of electrons involved in the oxidation and/or the reduction step and to ensure the nature of the redox process. Based upon the obtained results, an electrode reaction mechanism was proposed. Computational studies of HND supported the experimental results. UV-Visible spectroscopy was also employed for the detailed characterization of the compound in a wide range of pH and for the determination of its pK_a.     

Effect of bovine serum albumin on the surface properties of ionic liquid-type Gemini surfactant

The effect of bovine serum albumin on the surface properties of IL-type gemini surfactant ([C₁₀-4-C₁₀im]Br₂), have been investigated by surface tension method. The critical micelle concentration (CMC) as a function of BSA concentrations at various temperatures was investigated. The CMC of [C₁₀-4-C₁₀im]Br₂ increases with increasing the concentration of BSA as well as the temperature of the system. The interfacial parameters viz; maximum surface excess concentration (Γ_max), the minimum area per molecule (A_min), and surface pressure at CMC (Π_cmc) were calculated. In addition, thermodynamic parameters of adsorption and micellization were evaluated by using surface tension data. The results indicated that the binding of [C₁₀-4-C₁₀im]Br₂ to BSA is spontaneous and exothermic in nature. The process is entropy driven and hydrophobic interactions are the major driving forces.     

A Review on Effects of Lubricant Formulations on Tribological Performance and Boundary Lubrication Mechanisms of Non-Doped DLC/DLC Contacts

Tribological efficiency of industrial applications involving boundary lubrication regime can be improved to an appreciable extent by the deposition of hard coatings on interacting surfaces. Among such coatings, diamond-like carbon (DLC) coatings are considered to be one of the most suitable ones for the said role. DLC coatings possess a unique combination of physical, chemical, and material properties due to which they can help in minimizing friction-induced energy and material losses even under starved lubrication conditions. Since commercial lubricants are optimized for steel surfaces, therefore, a lot of experimental investigations were carried out to analyze the tribological compatibility of these lubricants with various DLC coatings. However, there is still a lack of understanding about how DLC coatings interact with conventional lubricant additives. Some researchers reported tribologically beneficial interactions between DLC coatings and formulated lubricants while others observed no such behavior. To address these inconsistencies, there is a need to rearrange the published data in a more apprehensible and organized manner with a special emphasis on the mechanisms responsible for a particular tribological behavior. In this way, it can be determined whether synergistic or antagonistic correlation exists between a particular DLC-lubricant combination and research on DLC coatings can be continued in a logical way. In this article, most widely investigated non-doped DLC coatings (ta-C, a-C:H, a-C, and ta-C:H) are tribologically analyzed. Average values of friction and wear coefficients are calculated for various DLC-lubricant combinations using already published data and compared to quantify the effectiveness of a particular lubricant additive in enhancing tribological characteristics of symmetrical non-doped DLC contacts. Moreover, tribological performance parameters of non-doped DLC coatings are compared with those of doped-DLC coatings to understand differences in their tribological behavior in combination with additives.     

Old Reagent,New Results: Aromatization of Hantzsch 1,4-Dihydropyridines with Supported Bismuth Nitrate under Microwave Irradiation in Solventless System

Hantzsch 1,4-dihydropyriines were rapidly and efficiently oxidized using bismuth nitrate supported onto silica gel under microwave irradiation.     

Synthesis,physicochemical characterization and biological activity of nano complexes of iron(III) of 3(2'‐hydroxyphenyl)‐5‐(4′‐substituted phenyl) pyrazolines and aspartic acid

Mixed ligand complexes of Iron(III) with aspartic acid and 3(2′‐hydroxy phenyl)‐5‐(4′‐substituted phenyl) pyrazolines of type [Fe(C₄O₄NH₆)₂(C₁₅H₁₂N₂OX)] and [Fe(C₄O₄NH₆)(C₁₅H₁₂N₂OX)₂], where (C₄O₄NH₆) = aspartate, (C₁₅H₁₂N₂OX) = deprotonated 3(2′‐hydroxyphenyl)‐5‐(4′‐substituted phenyl) pyrazolines (X = H, CH₃, OCH₃, Cl), have been synthesized. These newly synthesized derivatives have been physicochemically characterized by elemental analysis (C, H, N, Cl and Fe), magnetic moment data, thermogravimetric analysis, molar conductance, cyclic voltammetry, spectral analysis (UV–visible, IR, far IR and fast atom bombardment mass spectrometry). Scanning electron microscopy, transmission electron microscopy and X‐ray powder diffraction studies have been carried out for powdered samples, which show nanometric particles of these derivatives. Antibacterial and antifungal potential of free pyrazoline and some iron(III) complexes have been evaluated. Copyright © 2012 John Wiley & Sons, Ltd.