Simultaneous Determination and Drug Dissolution Testing of Combined Amlodipine Tablet Formulations Using RP-LC

In the proposed work, the simultaneous analysis of amlodipine–rosuvastatin and amlodipine–atorvastatin in their dosage forms was achieved. Simultaneous dissolution profiles of the amlodipine–rosuvastatin and amlodipine–atorvastatin tablets are realized using Apparatus II with a simple, accurate and precise RP-LC method. The mobile phase consisting of 0.2 % H₃PO₄ and pH 5:methanol:acetonitrile (46:27:27) was used. The samples of 10 µL were injected onto a Zorbax SB C18 (100 mm, 4.6 mm, 3.5 µm particle size) column with 1.2 µL min⁻¹ flow rate. The samples were detected at 236 nm. By plotting peak area ratios vs. concentration, the linearity for amlodipine–rosuvastatin and amlodipine–atorvastatin was determined. With the developed RP-LC method, AML, ROS and ATOR were detected within the range of 0.25–10, 0.5–10 and 0.25–25 µg mL⁻¹, respectively. LOD and LOQ values were also calculated as 0.028, 0.058, 0.021 and 0.095 µg mL⁻¹, 0.195 µg mL⁻¹, 0.070 µg mL⁻¹ for AML, ROS and ATOR, respectively. System suitability tests parameters, such as capacity factor, selectivity to previous peak, selectivity to next peak, resolution to previous peak, resolution to next peak, tailing factor, theoretical number of plates, were performed and found coherent with the ICH guideline parameters. The proposed method has been extensively validated in terms of recovery, and recovery results were between 99 and 101 %. For proving the precision, between-day and within-day repeatability results of the method were proposed. The method can be used for the simultaneous determination of amlodipine–rosuvastatin and amlodipine–atorvastatin.

     

Design of a flotation cell equipped with ultrasound transducers to enhance coal flotation

Ultrasonic treatment is widely used for surface cleaning during physical, chemical and physico-chemical processes in mineral processing. Several research papers and a few industrial applications about the subject suggest that the mechanism behind the positive effect of ultrasound for mineral processing and especially flotation is due to formation of cavitation by ultrasonic energy. Within this study, coal floatability is investigated by use of a specially designed flotation cell equipped with ultrasound transducers with different power, frequency and geometry. The results indicate that ultrasonic treatment during coal flotation positively affects the quality and quantity of the properties of floated coals while using of lesser amounts of reagent than a conventional flotation system.     

Phenoxazine polymers: synthesis and structure

Phenoxazine polymers were obtained for the first time under conditions of chemical oxidative polymerization in aqueous alcohols and in an interphase process. The interphase process gave products with the higher molecular weight. Dependencies of the yields and degree of polymerization of phenoxazine from polymerization method, concentration of reactants, their ratio, reaction temperature and time, as well as chemical structures of the obtained polymers depending on the synthesis conditions, were studied. The polyphenoxazine chain growth is accomplished by the C-C-addition at the para-position of the phenyl rings with respect to nitrogen. Even when an excess of oxidant was used, the polyphenoxazine structure has only phenyleneamine units. The polymers obtained are amorphous and thermally stable.     

Grating coupler integrated photodiodes for plasmon resonance based sensing

In this work, we demonstrate an integrated sensor combining a grating-coupled plasmon resonance surface with a planar photodiode. Plasmon enhanced transmission is employed as a sensitive refractive index (RI) sensing mechanism. Enhanced transmission of light is monitored via the integrated photodiode by tuning the angle of incidence of a collimated beam near the sharp plasmon resonance condition. Slight changes of the effective refractive index (RI) shift the resonance angle, resulting in a change in the photocurrent. Owing to the planar sensing mechanism, the design permits a high areal density of sensing spots. In the design, absence of holes that facilitate resonant transmission of light, allows an easy-to-implement fabrication procedure and relative insensitivity to fabrication errors. Theoretical and experimental results agree well. An equivalent long-term RI noise of 6.3 × 10(-6) RIU/√Hz is obtained by using an 8 mW He-Ne laser, compared to a shot-noise limited theoretical sensitivity of 5.61 × 10(-9) RIU/√Hz. The device features full benefits of grating-coupled plasmon resonance, such as enhancement of sensitivity for non-zero azimuthal angle of incidence. Further sensitivity enhancement using balanced detection and optimal plasmon coupling conditions are discussed.     

Theoretical and Experimental Heat and Mass Transfer Analysis for a Falling Film Outside a Grooved Tube

The heat and mass transfer from a grooved tube is investigated experimentally for a falling-film flow. The experiments are conducted on a helical trapezoidal grooved tube at three temperatures of the feeding water: 30°C, 35°C, and 40°C. The Reynolds number (Re) of the air ranges between 1,500 and 3,500. Nusselt number (Nu) is expressed as a function of the Prandtl number (Pr), Re for air (Re_a), Re for water (Re_w); Sherwood number (Sh) is expressed as a function of the Schmidt number (Sc), Re_a, and Re_w, and the correlation coefficients are determined.     

Flow around a cylinder surrounded by a permeable cylinder in shallow water

The change in flow characteristics downstream of a circular cylinder (inner cylinder) surrounded by an outer permeable cylinder was investigated in shallow water using particle image velocimetry technique. The diameter of the inner cylinder and the water height were kept constant during the experiments as d?=?50?mm and h _w ?=?25?mm, respectively. The depth-averaged free-stream velocity was also kept constant as U?=?170?mm/s which corresponded to a Reynolds number of Re_d?=?8,500 based on the inner cylinder diameter. In order to examine the effect of diameter and porosity of the outer cylinder on flow characteristics of the inner cylinder, five different outer cylinder diameters (D?=?60, 70, 80, 90 and 100?mm) and four different porosities (???=?0.4, 0.5, 0.6 and 0.7) were used. It was shown that both porosity and outer cylinder diameter had a substantial effect on the flow characteristics downstream of the circular cylinder. Turbulent statistics clearly demonstrated that in comparison with the bare cylinder (natural case), turbulent kinetic energy and Reynolds stresses decreased remarkably when an outer cylinder was placed around the inner cylinder. Thereby, the interaction of shear layers of the inner cylinder has been successfully prevented by the presence of outer cylinder. It was suggested by referring to the results that the outer cylinder having 1.6????D/d????2.0 and 0.4????D/d????0.6 should be preferred to have a better flow control in the near wake since the peak magnitude of turbulent kinetic energy was considerably low in comparison with the natural case and it was nearly constant for these mentioned porosities ??, and outer cylinder to inner cylinder diameter ratios D/d.     

Exact Solutions for Fractional Differential-Difference Equations by (G′/G)-Expansion Method with Modified Riemann-Liouville Derivative

In this paper, the ($G′/G$)-expansion method is suggested to establish new exact solutions for fractional differential-difference equations in the sense of modified Riemann–Liouville derivative. The fractional complex transform is proposed to convert a fractional partial differential difference equation into its differential difference equation of integer order. With the aid of symbolic computation, we choose nonlinear lattice equations to illustrate the validity and advantages of the algorithm. It is shown that the proposed algorithm is effective and can be used for many other nonlinear lattice equations in mathematical physics and applied mathematics.     

Size tunable three-dimensional annular laser trap based on axicons

A three-dimensional (3D) ring-shaped laser trap has been built using axicons. The diameter of this laser trap ranges from 70 to 140 mum and is adjusted by simply changing the position of one axicon in the optical path. Parallel 3D trapping of 5 mum silica microspheres and 3D confinement of cells along the ring are demonstrated. In this system the special optical properties of axicons are used to create a continuous annular trap with high power efficiency and a constant numerical aperture. This new approach, without any mechanical scanning, offers significant potential for applications in cell motility analysis and biotropism studies.     

Finite-Size Scaling Analysis of a Three-Dimensional Blume--Capel Model in the Presence of External Magnetic Field

The Blume-Capel model in the presence of external magnetic field H has been simulated using a cellular automaton algorithm improved from the Creutz cellular automaton in three-dimension lattice. The field critical exponent 5 is estimated using the power law relations and the finite size scaling functions for the magnetization and the susceptibility in the range -0.1≤ h = H/J ≤0. The estimated value of the field critical exponent 5 is in good agreement with the universal value （δ = 5） in three dimensions. The simulations are carried out on a simple cubic lattice under periodic boundary conditions.     

The effect of B2O3 addition to the microstructure and magnetic properties of Ni0.4Zn0.6Fe2O4 ferrite

The effects of 0.01 and 0.1 mol B₂O₃ addition to the microstructure and magnetic properties of a Ni–Zn ferrite composition expressed by a molecular formula of Ni_0.4Zn_0.6Fe₂O₄ were investigated. The toroid-shaped samples prepared by pressing the milled raw materials used in the preparation of the composition were sintered in the range of 1000–1300 °C. The addition of 0.01 mol B₂O₃ increased the grain growth and densification giving rise to reduced intergranular and intragranular porosity due to liquid-phase sintering. The sintered toroid sample at 1300 °C gave the optimum magnetic properties of B_r=170 mT, H_c=0.025 kA/m and a high initial permeability value of μ_i=4000. The increment of the B₂O₃ content to 0.1 mol resulted in a pronounced grain growth and also gave rise to large porosity due to the evaporation of B₂O₃ at higher sintering temperatures. Hence, it resulted in an air-gap effect in the hysteresis curves of these samples.