Reaction of 2-methoxy-3H-azepine with NBS: efficient synthesis of 2-substituted 2H-azepines

[reaction: see text] The reaction of 2-methoxy-3H-azepines, in the presence or absence of a nucleophile, with N-bromosuccinimide (NBS) gave a regioselective 1,4-adduct from which the corresponding 2H-azepine derivatives were formed via base-promoted hydrogen bromide elimination, generally in moderate to quantitative yield. Competitive formation of 4-bromo-2-methoxy-3H-azepine by electrophilic substitutuion or 3H-azepin-2-yl 2H-azepin-2-yl ether by transetherification was minimized at lower reaction temperatures. Quantitative substitution of 2-(2',4',6'-trichlorophenoxy)-2H-azepine derivatives, formed in moderate yield from the respective 3H-azepine and NBS in the presence of 2,4,6-trichlorophenol (TCP), by various nucleophiles gave the corresponding 2-substituted 2H-azepine. Among these nucleophiles were alkanethiol and alkylamine that are not tolerated in the reaction of 3H-azepine and NBS.     

Preparation of octadecyl modified column gels using heat-treated silicas and their retention behaviour in high-performance liquid chromatography

Summary The effect of silanol groups on three types of octadecylmodified column gels using heat-treated silicas by calcination has been studied by high-performance liquid chromatography. After heat-treating at 180°C, 500°C and 950°C, the silicas treated with octadecyldimethylchlorosilane were used for the measurement of physical and chemical analysis. From elemental carbon analysis data, the reactive silanol group concentrations, _OH(s), were determined to be 2.0 in the 180°C treated silica, 2.1 in the 500°C treated silica and 1.6 in the 950°C treated silica, respectively (original silica: mean pore diameter 116 Å, specific surface area 298 m²/g, pore volume 1.22 ml/g, particle size 5.0 m). The separation factors, , of pyridine versus phenol were measured to be 0.79 on 180°C treated silica, 0.91 on 500°C treated silica and 1.98 on 950°C treated silica, using acetonitrile-water mixtures as the eluent. And then, on the basis of the physico-chemical and chromatographic data, the three types of octadecyl modified column gels using heat-treated silicas by calcination have been compared.     

Stereocontrol in radical polymerization

The stereospecific radical polymerization of vinyl esters, methacrylates, and alpha-substituted acrylates was studied. Fluoroalcohols, as a solvent, have remarkable effects on the stereoregularity of the radical polymerizations of vinyl acetate, vinyl pivalate, and vinyl benzoate, affording polymers rich in syndiotacticity, heterotacticity, and isotacticity, respectively. This method was successfully applied to the polymerization of methacrylates to give syndiotactic polymers. The steric repulsion between the entering monomer and the chain-end monomeric unit bound by the solvent through hydrogen bonding is important for the stereochemical control in these systems. Lewis acid catalysts, such as lanthanide trifluoromethanesulfonates and zinc salts, were also effective for the stereocontrol during the radical polymerization of methyl methacrylate, to reduce the syndiotacticity and alpha-(alkoxymethyl)acrylates to synthesize isotactic and syndiotactic polymers. Radical polymerization of the methacrylates bearing a bulky ester group, such as the triphenylmethyl methacrylate derivatives, gave highly isotactic polymers, as in the case of anionic polymerization. In addition, the control of one-handed helical conformation was attained in the radical polymerization of 1-phenyldibenzosuberyl methacrylate using chiral neomenthanethiol or cobalt(II) complexes as an additive.     

Preparation of dry powder inhalation with lactose carrier particles surface-coated using a Wurster fluidized bed

An attempt was made to produce carrier particles for dry powder inhalation with lactose carrier particles surface-coated using a Wurster fluidized bed. The lactose carrier particles were coated with lactose aqueous solution containing hydroxypropyl methyl cellulose (HPMC) as a binder using a Wurster coating apparatus. Drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers under various particle surface conditions. These powder mixtures were aerosolized by a Jethaler((R)), and the in vitro deposition properties of salbutamol sulfate were evaluated by a twin impinger. The in vitro inhalation properties of the powder mixture prepared using the coated lactose carrier differed significantly compared with those of the powder mixture prepared using the uncoated lactose carrier, indicating improvements in in vitro inhalation properties of sulbutamol sulfate. In vitro inhalation properties increased with the surface coating time. This surface coating system would thus be valuable for increasing the in vitro inhalation properties of dry powder inhalation with lactose carrier particles.     

Evaluation of flow properties of dry powder inhalation of salbutamol sulfate with lactose carrier

The effects of the flow and packing properties of a drug/carrier powder mixture on emission of drug adhering to the carrier from capsules and inhalation devices were investigated. Model powder mixtures were designed consisting of lactose carriers with different particle shapes were prepared by surface treatment and micronized salbutamol sulfate. These powder mixtures were aerosolized by a Spinhaler, and in vitro deposition properties of salbutamol sulfate were evaluated by a twin impinger. The flow properties of the mixed powders were evaluated by the Carr's flowability index (FI) and Hausner's ratio (HR). The packing properties of the mixed powders were determined employing the tapping method. Compared with the powder mixed with the untreated lactose carrier, the FI, HR, and the constant K in Kawakita's equation of the powder mixture prepared using the surface-treated lactose carrier were significantly different, showing that the flow and packing properties of the drug/carrier powder mixture were improved. Using this surface-treated system, the handling of the powder mixture when packing into capsules is improved, which is desirable for handling dry powder inhalants. The fraction (%) of drug emitted from capsules and devices (EM) and the FI of the powder mixture were correlated. As the flow properties improved, the outflow of the powder mixture from capsules and devices became easier, and emission of drug adhering on the carrier from capsules and devices improved. Improvement of the inhalation process, such as the drug particles emitted from the inhalation system, is valuable for increasing inhalation properties of dry powder inhalation.     

Emulsifier-free emulsion polymerization of tetrafluoroethylene by radiation. I. Effects of reaction conditions on the polymerization rate and polymer molecular weight

The radiation-induced emulsifier-free emulsion polymerization of tetrafluoroethylene was carried out at an initial pressure of 2–25 kg/cm², temperature of 30–110°C, and under a dose rate of 0.57 × 10⁴?3.0 × 10⁴ rad/hr. The rate of polymerization was shown to be proportional to 1.0 and 1.3 powers of the dose rate and initial pressure, respectively, and is maximal at about 70°C. The molecular weight of polytetrafluoroethylene (PTFE) lies in the range of 10⁵?10⁶, increases with reaction time in the early stage of polymerization, and is maximal at 70°C but is almost independent of the dose rate. An interesting discovery is that PTFE, a hydrophobic polymer, forms as a stable latex in the absence of emulsifier. When PTFE latex coagulates during polymerization under certain conditions, the polymerization rate decreases, probably because polymerization proceeds mainly on the polymer particle surface. The observed rate acceleration and successive increase in polymer molecular weight may be due to slow termination of propagating radicals in the rigid PTFE particles.     

Quinolone analogues 6 [1‐5]. Synthesis of 3‐halogeno‐1‐methylpyridazino[3,4‐b]quinoxalin‐4(1H)‐ones

The reaction of the quinoxaline N‐oxides 7a,b with diethyl ethoxymethylenemalonate gave the 1‐methylpyridazino[3,4‐b]quinoxaline‐4,4‐dicarboxylates 8a,b , whose reaction with N‐bromosuccinimide or N‐chlorosuccinimide afforded the 3‐halogeno‐1‐methylpyridazino[3,4‐b]quinoxaline‐4,4‐dicarboxylates 9a‐d. The reaction of compounds 9a‐d with hydrazine hydrate resulted in hydrolysis and decarboxylation to provide the 3‐halogeno‐1‐methylpyridazino[3,4‐b]quinoxaline‐4‐carboxylates 10a‐d , whose reaction with nitrous acid effected oxidation to furnish the 3‐halogeno‐4‐hydroxy‐1‐methylpyridazino[3,4‐b]quinoxaline‐4‐carboxylates 11a‐d , respectively. The reaction of compounds 11a‐d with hydrazine hydrate afforded the 3‐halogeno‐1‐methylpyridazino[3,4‐b]quinoxalin‐4‐ols 12a‐d , whose oxidation provided the 3‐halogeno‐1‐methylpyridazino[3,4‐b]quinoxalin‐4(1H)‐ones 6a‐d , respectively. Compounds 6a‐d had antifungal activities in vitro.     

Synthesis of Optically Active Vasicinone Based on Intramolecular Aza-Wittig Reaction and Asymmetric Oxidation(1)

Both optical isomers of a quinazoline alkaloid, vasicinone, were synthesized by two different methods. The first method used (3S)-3-hydroxy-gamma-lactam as a chiral synthon, which was, after O-TBDMS protection, o-azidobenzoylated followed by treatment with tri-n-butylphosphine to afford (S)-(-)-vasicinone via the tandem Staudinger/intramolecualr aza-Wittig reaction. The second method utilized asymmetric oxygenation of deoxyvasicinone with (1S)-(+)- or (1R)-(-)-(10-camphorsulfonyl)oxaziridine (the Davis reagent), respectively. The aza-enolate anion of deoxyvasicinone was treated with (S)-(+)-reagent to afford (R)-(+)-vasicinone in 71% ee, while the reaction with (R)-(-)-reagent gave (S)-(-)-vasicinone in 62% ee. The optical purity was analyzed by HPLC on specially modified cellulose as a stationary phase. These results provided a facile method to prepare both optical isomers of vasicinone and confirmed the recently reversed stereochemistry of natural (-)-vasicinone.     

Synthesis of pyrimidino[4,5-b][1,5]benzodiazepin-2-ones and pyrimidino[1,6-a]benzimidazol-1-ones from 4-ethoxycarbonylamino-1H-1,5-benzodiazpine-3-carbonitrile via 4-(2-aminoanilino)pyrimidin-2(1H)-one-5-carbonitriles

Reactions of 4-ethoxycarbonylamino-1H-1,5-benzodiazepine-3-carbonitrile (2) with aliphatic primary amines gave 1-substituted 4-(2-aminoanilino)pyrimidin-2(1H)-one-5-carbonitriles 3. Analogous reactions of 2 with aromatic primary amines afforded 2-(2′-anilino-1′-cyanovinyl)benzimidazoles 5 and 6. Upon treatment with triethylamine, 3 underwent intramolecular cyclization to give 3-substituted 5-aminopyrimidino[4,5-b]-[1,5]benzodiazepin-2(3H,11H)-ones 8 . Heating of 3 with p-toluenesulfonic acid in ethanol gave 2-substituted pyrimidino[1,6-a]benzimidazol-1(2H)one-4-carbonitriles 9 . Reactions of 2 with hydrazines were also described. Mechanistic pathways are proposed to account for the products.     

Synthesis of isoxazolo[2,3-a]quinoxalines and pyrrolo[1,2-a]quinoxalines by 1,3-dipolar cycloaddition reaction

The isoxazolo[2,3-a]quinoxalines 11a,b and pyrrolo[1,2-a]quinoxalines 12a,b were selectively synthesized from the 2-substituted 6-chloroquinoxaline 4-oxides 10a,b . The pyrrolo[1,2-a]quinoxalines 12a,b were clarified to be produced by the ring transformation of the isoxazolo[2,3-a]quinoxalines 11a,b . The pyrrolo[1,2-a]quinoxalines 14a,b were obtained from both 2,6-dichloroquinoxaline 4-oxide 9 and compounds 12a,b .