Local order around rare earth ions during the devitrification of oxyfluoride glasses

Erbium L(3)-edge extended x-ray absorption fine structure (EXAFS) measurements were performed on rare earth doped fluorosilicate and fluoroborate glasses and glass ceramics. The well known nucleating effects of erbium ions for the crystallization of cubic lead fluoride (based on x-ray diffraction measurements) and the fact that the rare earth ions are present in the crystalline phase (as indicated by Er(3+) emission spectra) seem in contradiction with the present EXAFS analysis, which indicates a lack of medium range structural ordering around the Er(3+) ions and suggests that the lead fluoride crystallization does not occur in the nearest neighbor distance of the rare earth ion. Molecular dynamics simulations of the devitrification process of a lead fluoride glass doped with Er(3+) ions were performed, and results indicate that Er(3+) ions lower the devitrification temperature of PbF(2), in good agreement with the experimental results. The genuine role of Er(3+) ions in the devitrification process of PbF(2) has been investigated. Although Er(3+) ions could indeed act as seeds for crystallization, as experiments suggest, molecular dynamics simulation results corroborate the experimental EXAFS observation that the devitrification does not occur at its nearest neighbor distance.     

Homoleptic 2-mercapto benzothiazolate uranium and lanthanide complexes

Treatment of [Ln(BH 4) 3(THF) 3] (Ln = Ce, Nd) with 3 and 4 mol equiv of KSBT in tetrahydrofuran (THF) led to the formation of [Ln(SBT) 3(THF)] and [K(THF)Ln(SBT) 4], respectively. The uranium(IV) compound [U(SBT) 4(THF) 2] was obtained from U(BH 4) 4 and was reversibly reduced by sodium amalgam into the corresponding anionic uranium(III) complex. The crystal structures of [Ln(SBT) 3(THF) 2] (Ln = Ce, Nd), [K(15-crown-5) 2][Nd(SBT) 4], [U(SBT) 4(THF)], and [K(15-crown-5) 2][U(SBT) 4(py)] show the bidentate coordination mode and the thionate character of the SBT ligand.     

Sequence effects on the forced translocation of heteropolymers through a small channel

By using a recently developed Monte Carlo algorithm and an exact numerical method, we calculate the translocation probability and the average translocation time for charged heterogeneous polymers driven through a nanopore by an external electric field. The heteropolymer chains are composed of two types of monomers (A and B) which differ only in terms of their electric charge. We present an exhaustive study of chains composed of eight monomers by calculating the average translocation time associated with the 256 possible arrangements for various ratios of the monomer charges (lambda(A)lambda(B)) and electric field intensities E. We find that each sequence leads to a unique value of the translocation probability and time. We also show that the distribution of translocation times is strongly dependent on the two forces felt by the monomers ( approximately lambda(A)E and approximately lambda(B)E). Finally, we present results that highlight the effect of having repetitive patterns by studying the translocation times of various block copolymer structures for a very long chain composed of N=2(18) monomers (all with the same number of A and B monomers).     

Detection of pathogenic Staphylococcus aureus bacteria by gold based immunosensors

We describe the elaboration of ultra-sensitive immunosensors, to detect the bacterial pathogen Staphylococcus aureus. We utilized commercially available polyclonal anti-S. aureus antibody as receptor. Immunosensors were elaborated by building a self-assembled monolayer (SAM) of thiolamine onto planar gold-coated sensor chips. Then, Protein A was covalently linked to the thiolated SAM using glutaraldehyde as cross-linking agent. After a blocking step by Bovine Serum Albumin (BSA), the antibody was immobilized by affinity to Protein A. This step-by-step construction was monitored by Polarization Modulation Reflection Absorption Infrared Spectroscopy (PM-RAIRS) and Quartz Crystal Microbalance with Dissipation (QCM-D). In a first stage, the parameters of immunosensor elaboration were optimized using a model rabbit IgG. The accessibility of receptors and the homogeneity of their distribution were checked by PM-RAIRS, QCM-D, and by immuno-gold scanning electron microscopy. Then, the specific rabbit anti-S. aureus antibody was immobilized and the resulting sensing layer was applied to the detection of the pathogen target. Independent detection of bacteria immobilized on the sensors by fluorescent imaging allowed validation of the specificity of recognition toward the pathogen as well as a quantitative response of the sensor. Using PM-RAIRS as transducing technique allowed us to enhance sensitivity and reach a very competitive detection level (10⁵ CFU mL^?1).     

β-N-Heterocyclic Cyclobutane Carboximides: Synthesis through a Tandem Base-Catalyzed Amidation/aza-Michael Addition Protocol and Facile Transformations

A stereoselective one-pot double derivatization of cyclobutene-1-carboxylic acid via a mild organic base catalyzed amidation/aza-Michael addition of benzo[d]oxazol-2(3H)-ones has been developed. This unprecedented tandem reaction provides access to novel β-N-heterocyclic cyclobutane carboximide derivatives with a trans geometry. The carboximide moiety reacts smoothly with nucleophiles, allowing access to diverse derivatives of trans-β-N-heterocyclic cyclobutanecarboxylic acid, including peptidomimetic structures.     

Single Lithium‐Ion Conducting Polymer Electrolytes Based on a Super‐Delocalized Polyanion

A novel single lithium‐ion (Li‐ion) conducting polymer electrolyte is presented that is composed of the lithium salt of a polyanion, poly[(4‐styrenesulfonyl)(trifluoromethyl(S‐trifluoromethylsulfonylimino)sulfonyl)imide] (PSsTFSI^?), and high‐molecular‐weight poly(ethylene oxide) (PEO). The neat LiPSsTFSI ionomer displays a low glass‐transition temperature (44.3 °C; that is, strongly plasticizing effect). The complex of LiPSsTFSI/PEO exhibits a high Li‐ion transference number (t_Li⁺=0.91) and is thermally stable up to 300 °C. Meanwhile, it exhibits a Li‐ion conductivity as high as 1.35×10^?4 S cm^?1 at 90 °C, which is comparable to that for the classic ambipolar LiTFSI/PEO SPEs at the same temperature. These outstanding properties of the LiPSsTFSI/PEO blended polymer electrolyte would make it promising as solid polymer electrolytes for Li batteries.     

High‐Pressure Raman and Calorimetry Studies of Vanadium(III) Alkyl Hydrides for Kubas‐Type Hydrogen Storage

Reversible hydrogen storage under ambient conditions has been identified as a major bottleneck in enabling a future hydrogen economy. Herein, we report an amorphous vanadium(III) alkyl hydride gel that binds hydrogen through the Kubas interaction. The material possesses a gravimetric adsorption capacity of 5.42 wt % H₂ at 120 bar and 298 K reversibly at saturation with no loss of capacity after ten cycles. This corresponds to a volumetric capacity of 75.4 kgH₂ m^?3. Raman experiments at 100 bar confirm that Kubas binding is involved in the adsorption mechanism. The material possesses an enthalpy of H₂ adsorption of +0.52 kJ mol^?1 H₂, as measured directly by calorimetry, and this is practical for use in a vehicles without a complex heat management system.     

Remarkable polyhedra related to set functions,games and capacities

Set functions are widely used in many domains of operations research (cooperative game theory, decision under risk and uncertainty, combinatorial optimization) under different names (TU-game, capacity, nonadditive measure, pseudo-Boolean function, etc.). Remarkable families of set functions form polyhedra, e.g., the polytope of capacities, the polytope of p-additive capacities, the cone of supermodular games, etc. Also, the core of a set function, defined as the set of additive set functions dominating that set function, is a polyhedron which is of fundamental importance in game theory, decision-making and combinatorial optimization. This survey paper gives an overview of these notions and studies all these polyhedra.     

Synthesis and Characterization of GaIII,YIII, and LuIII Complexes with Etifenin and Analogues

Complexes of etifenin ( 1a ), disofenin ( 1b ), and mebrofenin ( 1c ) with Ga^III, Y^III, and Lu^III were synthesized and characterized by NMR spectroscopy and UV/Vis spectroscopy. Stability and protonation constants of the complexes of 1a were determined by potentiometry and distribution diagrams were calculated. It was shown that the Y^III and Lu^III species are most stable as bis chelates at higher pH, whereas the Ga^III complex degrades at pH < 4.5.