Fractionation of metals and metalloids by chemical bonding from particles accumulated by electrostatic precipitation in an Argentine thermal power plant

A study was undertaken to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in fly ashes collected in the electrostatic precipitator of a thermal power plant in San Nicolás (Argentina). Five samples were collected during one week of operation. For the fractionation, the scheme applied consisted in extracting the elements in four fractions namely (i) soluble and exchangeable elements; (ii) carbonates, oxides and reducible elements; (iii) bound to sulfidic metals; and (iv) residual elements. Metals and metalloids at μg g^− 1 level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). For validation, a standard reference material (SRM 1633 coal fly ash) from NIST was subjected to the same chemical sequential extraction procedure that the samples. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the major minerals present in the matrix. Total analyte concentration (in μg g^− 1) varied from 10.6 for Pb to 17,622 for Al. Minimum and maximum concentrations (in μg g^− 1) found in individual samples in the four fractions were: Al, 92.7–9668; As, < 0.3–143; Cr, 2.0–10.4; Cu, < 0.2–35.6; Fe, < 0.3–4992; Mn, < 0.1–128; Ni, < 0.3–139; Pb, < 0.5–9.1; Ti, < 0.3–2243; V, 17.0–112.9; and Zn, < 0.1–68.2. The leachability of the 11 elements under study proved to be different. Low percentages of Al (1%), V (7%) and Cr (8%) were detected in the most bioavailable fraction. Arsenic was found to be most abundant in the non-silicate phase, represented by the second and third fractions, while Cr, Fe, Ni, Pb and Zn were mostly associated to the residual fraction.     

CH...O and CH...F links form the cage structure of dioxane-trifluoromethane

The molecular beam Fourier transform microwave spectrum of 1,4-dioxane-trifluoromethane has been assigned and measured. The two subunits form a cage stabilized by one C-H...O and two C-H...F weak hydrogen bonds. The C-H...O link involves the axial lone pair of one of the two equivalent ring oxygens, while the two C-H...F bridges connect trifluoromethane to the two axial hydrogens in positions 3 and 5. The dissociation energy has been estimated from the D(J) centrifugal distortion parameter to be approximately 6.8 kJ/mol.     

On some incidence structures

In this paper,suggested by André's papers ([2), [3]), we construct geometrical structures (X,?,//}) where X is a finite set of points, ? is a set of lines, and // is an equivalence relation on ?. These constructions are made starting with a finite and not empty set X and a permutation group G which is 2-transitive on X and such that the stabilizer of two distinct points of X is different from the identical subgroup. We look for conditions such that the structure (X, ?) is a (3,q)-Steiner system. We remember that a (3,q)-Steiner system is a pair (X,B), where X is a set of elements (called points), B is a system of subsets of X (called blocks), such that:

1. every block contains q points exactly;
2. given three distinct points x,y,z of X, there is exactly one subset of X belonging to B and containing x,y,z.

At the end we construct such a system with the help of a nearskewfield (according to Zassenhaus [7], [8]).     

Metal-induced assembling/disassembling of fluorescent naphthalenediimide derivatives signalled by excimer emission

The new quadridentate bischelating ligands 2 and 3 display in solution the typical absorption and emission properties expected for naphthalenediimide derivatives. Spectrophotometric studies show that systems 2 and 3 interact with Zn(II), Cd(II) and Cu(I) in CHCl3 or MeCN according to an apparent 1:1 stoichiometry. Molecular modelling, ESI-MS and 1H NMR experiments indicate that the complex species formed in the presence of stoichiometric amounts of metal ion are nonhelical [2 + 2] adducts. The metal-induced self-assembling process is signalled by an intense excimer-type emission caused by the intramolecular interaction of two naphthalenediimide subunits that face each other in the [2 + 2] adduct, as shown by molecular modelling studies. In the presence of excess metal ion, a disassembling process takes place, leading to a dinuclear complex with a 2:1 metal/ligand stoichiometry, in which the intramolecular excimer is no longer allowed to form because the interaction between the naphthalenediimide subunits has been lost. Thus, the overall metal-induced assembling/disassembling process is signalled by the appearance and disappearance of the excimer band in the emission spectrum.     

In situ tissue pathology from spatially encoded mass spectrometry classifiers visualized in real time through augmented reality

Integration between a hand-held mass spectrometry desorption probe based on picosecond infrared laser technology (PIRL-MS) and an optical surgical tracking system demonstrates in situ tissue pathology from point-sampled mass spectrometry data. Spatially encoded pathology classifications are displayed at the site of laser sampling as color-coded pixels in an augmented reality video feed of the surgical field of view. This is enabled by two-way communication between surgical navigation and mass spectrometry data analysis platforms through a custom-built interface. Performance of the system was evaluated using murine models of human cancers sampled in situ in the presence of body fluids with a technical pixel error of 1.0 ± 0.2 mm, suggesting a 84% or 92% (excluding one outlier) cancer type classification rate across different molecular models that distinguish cell-lines of each class of breast, brain, head and neck murine models. Further, through end-point immunohistochemical staining for DNA damage, cell death and neuronal viability, spatially encoded PIRL-MS sampling is shown to produce classifiable mass spectral data from living murine brain tissue, with levels of neuronal damage that are comparable to those induced by a surgical scalpel. This highlights the potential of spatially encoded PIRL-MS analysis for in vivo use during neurosurgical applications of cancer type determination or point-sampling in vivo tissue during tumor bed examination to assess cancer removal. The interface developed herein for the analysis and the display of spatially encoded PIRL-MS data can be adapted to other hand-held mass spectrometry analysis probes currently available.

Integration between a hand-held mass spectrometry desorption probe based on picosecond infrared laser technology (PIRL-MS) and an optical surgical tracking system demonstrates in situ tissue pathology from point-sampled mass spectrometry data.     

Coordination of 2,2'-bipyridyl and 1,10-phenanthroline to yttrium and lanthanum complexes based on a scorpionate ligand

Reaction of yttrium and lanthanum trichloride with 1 equiv of sodium or potassium hydrotris(3,5-dimethylpyrazolyl)borate and 1 equiv of 2,2'-bipyridine gives good yields of the complexes [MCl(2)(Tp(Me2))(C(10)H(8)N(2))] (M = Y (1), La (2)). The analogous compounds with 1,10-phenanthroline, [MCl(2)(Tp(Me2))(C(12)H(8)N(2))] (M = Y (3), La (4)), have been obtained by a similar procedure. The solid-state structures of 2-4 were determined by single-crystal X-ray diffraction and revealed that the compounds are all seven-coordinate with capped octahedral geometry. In contrast, reaction of yttrium trichloride with 1 equiv of sodium hydrotris(3,5-dimethylpyrazolyl)borate in the presence of 1 equiv of neocuproine affords [YCl(3)(Tp(Me2))][Na(neoc)(3))] (5). Compounds 1 and 2 provide an entry for the synthesis of complexes containing the bipyridyl ligand in a radical anionic form or in a dianionic form. Reaction of 1 and 2 with an excess of sodium amalgam gives [Y(Tp(Me2))(bipy)(THF)(2)] (6) and [La(Tp(Me2))(2)(bipy)] (7), respectively. The structures of both compounds have been determined by X-ray crystallography. Compound 7 can be oxidized with iodine to give [La(Tp(Me2))(2)(bipy)]I (8).     

The rat liver mitochondrial proteins

Subcellular fractionation increases the probability of detection of low-abundance proteins. We prepared a fraction highly enriched in mitochondrial proteins from rat liver. The proteins were analyzed by two-dimensional (2-D) electrophoresis using broad-and narrow-range immobilized pH gradient strips, and identified by matrix assisted laser desorption/ionization-mass spectrometry (MALDI-MS). 192 different gene products were detected, of which approximately 70% were enzymes with a broad spectrum of catalytic activities. Most of the identified proteins were detected in other rat protein samples as well, which were analyzed in our laboratory. Eight gene products were detected for the first time. These were represented by one spot each, whereas most of the frequently detected proteins were represented by multiple spots. In average, approximately 10-15 spots corresponded to one gene product.     

Pentanuclear Ba(II) complex of a macrocyclic ligand

We report here the first pentanuclear Ba(II) complex of a new tri-aza, tri-oxa macrocycle with two carboxymethyl "arms" pending from two N atoms, H2L2. The crystal structure corresponds to the formula [Ba5(H0.375L2)4(ClO4)(CH3CH2OH)(H2O)2](ClO4)2.5 x 9.5H2O and reveals the presence of four molecules of the ligand surrounding five Ba(II) ions, giving rise to an unusual structure with the metal ions inside a spherical organic cavity.     

Structural characterization techniques for the analysis of semiconductor strained heterostructures

A combined method for structural characterization of strained epitaxial heterostructures involving different techniques such as Rutherford backscattering spectrometry (RBS), multiple crystal X-ray diffractometry (MCD) and transmission electron microscopy (TEM) is presented. In order to obtain a complete characterization of the analysed structure, three different quantities are measured independently: the epilayer thickness, the density of misfit dislocations which may appear at the interface, and the significant components of the strain tensor, mainly the tetragonal distortion, affecting the epilayer lattice. In this way the thermodynamic state and the mechanisms of plastic deformation of the structures can be fully investigated. In this contribution we present and discuss the experimental results concerning a set of InP/GaAs samples having different layer thicknesses ranging from 5 to 500 nm. The thickness of the samples has been determined by RBS. Measurements of in-plane strain and tetragonal distortion have been performed by MCD and RBS-channelling respectively, finally TEM has been used for determining the defects densities and distribution.