A study on the applications of the acoustic design sensitivity analysis of vibrating bodies

The determination of the sensitivity of the acoustical characteristics of vibrating systems with respect to the variation of the design parameters predicting these characteristics is a necessary and important step of the acoustic design and optimization process. Acoustic design sensitivity analysis includes the computation and evaluation of the sensitivity information required for this procedure. In this study, a boundary element code performing the sensitivity analysis of the acoustic pressure by using the matrix sensitivities with respect to different design variables has been developed. The effect of the precision of boundary element discretization on the acoustic pressure sensitivity is examined via this code. The formulation is applied to a multi-source system and the dimension sensitivity analysis of near field pressures of two-dilating-spherical source is performed. The last application is devoted to a real sound source: a washing machine sitting on the floor. Sensitivity of the field pressures to the machine’s dimensions (size), surface velocity and frequency is examined on the bases of the boundary element model of the machine and half-space condition. The impacts of these variables are compared; and a limiting speed for the machine responding both the acoustical and operational requirements is determined.     

Simultaneous determination of cloramphenicol, salicylic acid and resorcinol by capillary zone electrophoresis and its application to pharmaceutical dosage forms

This study demonstrates the separation of active ingredients in acne formulations (salicylic acid, cloramphenicol and resorcinol in presence of azulene) by capillary zone electrophoresis. Factors affecting their separations were the buffer pH and concentration, applied voltage, sample preparation, and presence of additives. Optimun results were obtained with a 50 mM sodium tetraborate-50 mM sodium phosphate, pH 9.0. The carrier electrolyte gave baseline separation with good resolution, short migration times (<6 min), great reproducibility and accuracy. Calibration plots were linear over at least three orders of magnitude of analyte concentrations, the lower limits of detection being within the range 0.39-1.25 μg ml⁻¹. The procedure was fast and reliable and commercial pharmaceuticals could be analysed without prior sample clean-up procedure.     

On existence and asymptotic stability of solutions of a nonlinear integral equation

We prove an existence theorem for a nonlinear integral equation being a Volterra counterpart of an integral equation arising in the traffic theory. The method used in the proof allows us to obtain additional characterization in terms of asymptotic stability of solutions of an equation in question.     

Permeability,permselectivity, and penetrant‐induced plasticization in fluorinated polyimides studied by positron lifetime measurements

The ortho‐positronium (o‐Ps) lifetime τ₃ and its intensity I₃ in various fluorinated polyimides were determined by the positron annihilation technique and were studied with the spin–lattice relaxation time T₁ and the propylene permeability, solubility, diffusivity, and permselectivity for propylene/propane in them. τ₃, I₃, and the distribution of τ₃ changed when the bulky moieties in the polyimides were changed. The polyimides, having both large τ₃ and I₃ values, exhibited a short T₁ and a high permeability with a low permselectivity. The propylene permeability and diffusivity were exponentially correlated with the product of I₃ and the average free‐volume hole size estimated from τ₃. In highly plasticized states induced by the sorption of propylene, the permeability increased with the propylene pressure in excellent agreement with the change in the free‐volume hole properties probed by o‐Ps. The large and broad distribution of the free‐volume holes and increased local chain mobility for the 2,2‐bis(3,4‐decarboxyphenyl) hexafluoropropane dianhydride‐based polyimides are thought to be important physical properties for promoting penetrant‐induced plasticization. These results suggest that o‐Ps is a powerful probe of not only the free‐volume holes but also the corresponding permeation mechanism and penetrant‐induced plasticization phenomenon. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 308–318, 2003     

Comparison of Several Calibration Procedures for Glass Electrodes in Proton Concentration

Several reported procedures for calibrating glass electrodes in proton concentration are compared. Some recommendations for non-experts are also given. The examined procedures can be classified into two broad categories, namely: those based on direct potential difference measurements of solutions of known proton concentration and those that use one or several pH standards to calibrate the electrode and subsequently measure the pH of solutions containing known proton concentrations. With a single buffer, the two types of procedures lead to equivalent results. However, if two pH buffers are used, the slope of the calibration graph in proton concentration will differ from the real electrode slope to an extent proportional to the difference between the liquid junction potentials of the two buffers. Therefore, any other method is preferable under these circumstances.     

Invariant Subspaces for Semigroups of Algebraic Operators

T. Laffey showed (Linear and Multilinear Algebra6(1978), 269–305) that a semigroup of matrices is triangularizable if the ranks of all the commutators of elements of the semigroup are at most 1. Our main theorem is an extension of Hthis result to semigroups of algebraic operators on a Banach space. We also obtain a related theorem for a pair {A, B} of arbitrary bounded operators satisfying rank (AB−BA)=1 and several related conditions. In addition, it is shown that a semigroup of algebraically unipotent operators of bounded degree is triangularizable.     

A facile non-oxidative method for synthesizing 1,3-disubstituted pyrroles from pyrrolidine and aldehydes

Reactions of pyrrolidine with 2 equiv of aldehydes without any catalyst in a pressurized vessel at 140–200 °C yielded 1,3-disubstituted pyrroles. -Branched aldehydes gave fairly good yields of the corresponding products by this method, which provides a facile non-oxidative procedure for synthesizing 1,3-dialkylpyrroles from inexpensive pyrrolidine and aldehydes.     

WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.