Polyaromatic Profluorescent Nitroxide Probes with Enhanced Photostability

Novel profluorescent mono‐ and bis‐isoindoline nitroxides linked to napthalimide and perylene diimide structural cores are described. These nitroxide‐fluorophore probes display strongly suppressed fluorescence in comparison to their corresponding non‐radical diamagnetic methoxyamine derivatives. The perylene‐based probe possessing two isoindoline systems tethered through ethynyl linkages was shown to be the most photostable in solution, demonstrating significantly enhanced longevity over the 9,10‐bis(phenylethynyl)anthracene fluorophore used in previous profluorescent nitroxide probes.     

Evidence for a near-resonant charge transfer mechanism for double-stranded peptide nucleic acid

We present evidence for a near-resonant mechanism of charge transfer in short peptide nucleic acid (PNA) duplexes obtained through electrochemical, STM break junction (STM-BJ), and computational studies. A seven base pair (7-bp) PNA duplex with the sequence (TA)(3)-(XY)-(TA)(3) was studied, in which XY is a complementary nucleobase pair. The experiments showed that the heterogeneous charge transfer rate constant (k(0)) and the single-molecule conductance (σ) correlate with the oxidation potential of the purine base in the XY base pair. The electrochemical measurements showed that the enhancement of k(0) is independent, within experimental error, of which of the two PNA strands contains the purine base of the XY base pair. 7-bp PNA duplexes with one or two GC base pairs had similar measured k(0) and conductance values. While a simple superexchange model, previously used to rationalize charge transfer in single stranded PNA (Paul et al. J. Am. Chem. Soc. 2009, 131, 6498-6507), describes some of the experimental observations, the model does not explain the absence of an enhancement in the experimental k(0) and σ upon increasing the G content in the duplexes from one to two. Moreover, the superexchange model is not consistent with other studies (Paul et al. J. Phys. Chem. B 2010, 114, 14140), that showed a hopping charge transport mechanism is likely important for PNA duplexes longer than seven base pairs. A quantitative computational analysis shows that a near-resonant charge transfer regime, wherein a mix of superexchange and hopping mechanisms are expected to coexist, can rationalize all of the experimental results.     

Surface-amplified ligand disorder in CdSe quantum dots determined by electron and coherent vibrational spectroscopies

This Article reports measurements of the intra- and intermolecular ordering of tight-binding octylphosphonate ligands on the surface of colloidal CdSe quantum dots (QDs) within solid state films, and the dependence of this order on the size of the QDs. The order of the organic ligands, as probed by vibrational sum frequency generation (SFG) spectroscopy, decreases as the radius of the QDs decreases; this decrease is correlated with a decrease in the order of underlying Cd(2+), as detected by X-ray photoelectron spectroscopy (XPS) line width measurements, for radii of the QDs, R > 2.4 nm, and is independent of the disorder of the Cd(2+) for R < 2.4 nm. We believe that, for R < 2.4, the decreasing order of the ligands with decreasing size is due to an increase in the curvature of the QD surfaces. Disorder in the Cd(2+) results from the presence of a shell of Cd(2+)-surfactant complexes that form during synthesis, so this work demonstrates the possibility for chemical control over molecular order within films of colloidal QDs by changing the surfactant mixture.     

Biomimetic mineralisation of polymeric scaffolds using a combined soaking approach: adaptation with various mineral salts

Biomimetic strategies which utilise hydrogels have been targeted due to favourable hydrogel characteristics such as the presentation of a large surface area for crystal nucleation within a structured yet responsive scaffold. Chitosan hydrogels were prepared and mineralised using a combined method which involves alternate soaking of the films with precursor solutions, followed by treatment with saturated mineral solution. This method has been shown to be effective for the synthesis of calcium carbonate-chitosan composite materials with tensile strength comparable to nacre. The ratio of organic to inorganic is readily controlled through the presoaking solution concentrations. The ubiquity of this method is shown here with respect to switching out both the anion (CaHPO(4)) and the cation (BaSO(4)). Cation doping is also readily achieved allowing formation of Mg-rich CaCO(3). Poly(acrylic acid) added to (Mg,Ca)CO(3)-chitosan systems induces the formation of two polymorphs (vaterite and calcite) which coexist within the composite material. The mineralised scaffolds were analysed by SEM and powder XRD. The successful mineralisation of chitosan templates with various inorganic compounds shows that this combined approach is widely applicable as a biomimetic approach.     

Maritime inventory routing with multiple products: A case study from the cement industry

This paper considers a maritime inventory routing problem faced by a major cement producer. A heterogeneous fleet of bulk ships transport multiple non-mixable cement products from producing factories to regional silo stations along the coast of Norway. Inventory constraints are present both at the factories and the silos, and there are upper and lower limits for all inventories. The ship fleet capacity is limited, and in peak periods the demand for cement products at the silos exceeds the fleet capacity. In addition, constraints regarding the capacity of the ships’ cargo holds, the depth of the ports and the fact that different cement products cannot be mixed must be taken into consideration. A construction heuristic embedded in a genetic algorithmic framework is developed. The approach adopted is used to solve real instances of the problem within reasonable solution time and with good quality solutions.     

Continuous flow enzyme-catalyzed polymerization in a microreactor

Enzymes immobilized on solid supports are increasingly used for greener, more sustainable chemical transformation processes. Here, we used microreactors to study enzyme-catalyzed ring-opening polymerization of ε-caprolactone to polycaprolactone. A novel microreactor design enabled us to perform these heterogeneous reactions in continuous mode, in organic media, and at elevated temperatures. Using microreactors, we achieved faster polymerization and higher molecular mass compared to using batch reactors. While this study focused on polymerization reactions, it is evident that similar microreactor based platforms can readily be extended to other enzyme-based systems, for example, high-throughput screening of new enzymes and to precision measurements of new processes where continuous flow mode is preferred. This is the first reported demonstration of a solid supported enzyme-catalyzed polymerization reaction in continuous mode.     

Computational design of a β-peptide that targets transmembrane helices

The design of β-peptide foldamers targeting the transmembrane (TM) domains of complex natural membrane proteins has been a formidable challenge. A series of β-peptides was designed to stably insert in TM orientations in phospholipid bilayers. Their secondary structures and orientation in the phospholipid bilayer was characterized using biophysical methods. Computational methods were then devised to design a β-peptide that targeted a TM helix of the integrin α(IIb)β(3). The designed peptide (β-CHAMP) interacts with the isolated target TM domain of the protein and activates the intact integrin in vitro.     

Inversion of particle-stabilized emulsions of partially miscible liquids by mild drying of modified silica particles

Using a system of modified silica particles and mixtures of water and 2,6-lutidine to form particle-stabilized emulsions, we show that subtle alterations to the hydration of the particle surface can cause major shifts in emulsion structure. We use fluorescence confocal microscopy, solid state nuclear magnetic resonance (NMR) and thermo-gravimetric analysis (TGA) to explore this sensitivity, along with other shifts caused by modifications to the silica surface chemistry. The silica particles are prepared by a variant of the St?ber procedure and are modified by the inclusion of 3-(aminopropyl)triethoxysilane and the dye fluorescein isothiocyanate. Treatment prior to emulsification consists of gently drying the particles under carefully controlled conditions. In mixtures of water and 2,6-lutidine of critical composition, the particles stabilize droplet emulsions and bijels. Decreasing particle hydration yields an inversion of the emulsions from lutidine-in-water (L/W) to water-in-lutidine (W/L), with bijels forming around inversion. So dependent is the emulsion behavior on particle hydration that microscopic differences in drying within a particle sample can cause differences in the wetting behavior of that sample, which helps to stabilize multiple emulsions. The formation of bijels at emulsion inversion is also crucially dependent on the surface modification of the silica.     

“Do we teach subjects or students?” Analyzing science and mathematics teacher conversations about issues of equity in the classroom

Teachers involved in a Master's level course in diversity participated in virtual, synchronous, anonymized discussions around issues of ethnic and racial diversity, gender, and stereotypes that could impact their students’ participation in fields related to science, technology, engineering, and mathematics (STEM). Guided by theoretical frameworks from Social Cognitive Career Theory (SCCT) and Critical Race Theory (CRT), a convenience sample of 14 science and mathematics teachers participated in a series of virtual chats using open‐ended questioning and facilitated by two university instructors. Using conversation and critical discourse analyses, three primary themes emerged: understanding of issues related to stereotypes, encouragement of females and minorities to pursue careers in STEM, and the place for diversity discussions in science and mathematics classrooms. The teachers felt burdened by curricular and administrative constraints that inhibit their ability to participate in thought‐provoking critical conversations. The paper concludes with a discussion of ways teachers can assist in the STEM career identity development of their underrepresented females and students of color and calls for research that combines the key findings in SCCT and CRT to build confidence and capacity for teachers to effectively confront issues of racism, sexism, and stereotyping in science and mathematics classrooms.