Validation of the thermodynamic model of inorganic arsenic in non polluted river waters of the Basque country (Spain)

The thermodynamic model of inorganic arsenic was validated by comparing the predicted As(III) concentration with the experimentally determined one in several river waters samples of the Basque Country (Spain) collected in two sampling campaigns: spring and autumn 2000. This model takes into account the acid-base equilibria of As(III) and As(V) together with the redox equilibria between the H₃AsO₃ and H₃AsO₄ species. A correct prediction of As(III) concentration requires the knowledge of the total concentration of arsenic, pH, redox potential (referred to hydrogen electrode), and ionic strength values of the solution. The estimation of the activity coefficients of the arsenic species was performed by means of the Modified Bromley’s Methodology (MBM).In order to perform the experimental As(III) determination, an analytical method was implemented by using an ion exchange separation of As(III)/As(V) on a continuous FIA-IE-HG-AAS system. The total arsenic concentration was determined together with total concentration of the main alkaline or alkaline-earth metals and anions in the natural waters. Temperature compensated measurements of the pH and redox potentials were made in-situ at the sampling sites.For both seasonal campaigns, the agreement between predicted and experimental As(III) is really high for those samples belonging to non polluted river waters.     

Preparation of solutions of amidomagnesium chlorides in poly(ethylene oxide) and their characterization by conductivity measurements

Polymer electrolyte systems were prepared for the first time by dissolution of amidomagnesium chlorides in poly(ethylene oxide), (PEO). For the preparation, solutions of (hexamethyldisilylamido)magnesium chloride, (dimethylpyrrolyl)magnesium chloride, (diisopropylamido)magnesium chloride, piperidinomagnesium chloride and morpholinomagnesium chloride were chosen. The composition of these polymer electrolyte systems corresponds to the general formula R₂NMgCl·P(EO)_n·THF. Most work has been done with the system (hexamethyldisilylamido)magnesium chloride in PEO, (Me₃Si)₂NMgCl·P(EO)_n·THF, with n= 3, 4, 5, or 7. The electrolytes have a soft rubber-like consistency. At 30 °C, electrical conductivities of 10⁻⁶–10⁻⁵ S/cm were found. The conductivities were measured in the temperature range 20–60 °C. Within this temperature range a linear dependence of the logarithms of the conductivity on the inverse temperature was found and activation energies for the conducting process of 30–60 kJ/mol were calculated. Using those polymer electrolytes with a high content of the amidomagnesium compound, a reversible magnesium deposition takes place by cathodic reduction at potentials below −1.9 V vs. a Ag/AgCl reference electrode. These polymer electrolytes were found to be stable against oxidation up to about −0.3 V vs. Ag/AgCl. Electronic Publication     

Asymmetric hetero Diels-Alder as an access to carbacephams.

A short and efficient asymmetric synthesis of the (6R,7S)-7-tert-butoxycarbonylamino-2-ketocarbacepham is described. The key step involves the hetero Diels-Alder reaction of the benzylimine derived from the enantiomer of Garner's aldehyde with Danishefsky's diene.     

Arsenic Speciation Analysis in Solutions Treated with Zeolites

Experiments have been carried out to study the behaviour of organoarsenicals treated with zeolites by means of speciation analysis. IC-ICP-MS was applied to identify and quantify arsenite, arsenate and the following organoarsenicals: monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), trimethylarsine oxide (TMAO), tetramethylarsonium bromide (TMA⁺), arsenobetaine (AsB) and arsenocholine (AsC). Zeolites loaded with ferrous ions did not significantly increase the retention of inorganic arsenic species compared to the native zeolites, while there was a ten-fold removal of arsenate relating to arsenite. The formation of As(V) and DMA in the leachates containing clinoptilolites and mordenites was confirmed in the presence of natural and synthetic zeolites. Arsenobetaine and arsenocholine yielded higher levels of arsenate than the methylated species.     

Effect of ionization and the nature of the mobile phase in quantitative structure-retention relationship studies

The octanol-water distribution constant, commonly called partition coefficient, Po/w, is a parameter often retained as a measure of the hydrophobicity of a molecule. log Po/w, for a given molecule, can be conveniently evaluated constructing correlation lines between standard retention factor logarithms (log k) in reversed-phase liquid chromatography (RPLC) and standard log Po/w values. Many compounds of pharmaceutical interest can be quite hydrophobic and have, simultaneously, basic nitrogen atoms or acidic sulfur containing groups in their structure. This renders them ionizable. The hydrophobicity of the molecular drug form (Po/w value) is completely different from its ionic form (log Po/w(+ or -) value). The actual hydrophobicity of such ionizable molecule depends on the pH. It can be represented by an apparent Papp value that takes into account the amount of compound in its molecular and ionic state combining the Po/w and Po/w(+ or -) values. In this work, log k in RPLC for ionizable as well as non-ionizable pharmaceutical compounds with different therapeutic properties (10 beta-blockers, seven tricyclic antidepressants (TA), eight steroids and 12 sulfonamides) were correlated with log Po/w. Similar correlations were done between log k and the corrected log Papp values at pH 3. Aqueous-organic mobile phases containing acetonitrile (conventional RPLC) and micellar-organic mobile phases (micellar liquid chromatography, MLC), prepared with the anionic surfactant sodium dodecyl sulfate and the organic solvents acetonitrile, propanol or pentanol, were also used to elute the compounds. All mobile phases were buffered at pH 3. Using conventional retention RPLC data, the correlation of log k with log Po/w, was satisfactory for steroids because they cannot ionize. For ionizable beta-blockers and TAs, the use of log Papp values improved the quality of the correlations, but yielded similar results for sulfonamides. In MLC, since an electrostatic interaction is added to hydrophobic forces, poorer correlations were obtained in all cases. The retention data obtained in RPLC also seems to correlate better with the biological activity of the drugs.     

Intercalation of Dyes Containing SO3H Groups into Zn–Al Layered Double Hydroxide

The intercalates of Naphthol Yellow S, Tropaeolin 000, and Tropaeolin 00 were prepared by heating [Zn_0.67Al_0.33(OH)₂](CO₃)_0.165 · 0.5H₂O with acidic forms of the dye solutions in an open reaction vessel. The intercalates were characterized by chemical and thermal analysis, X-ray powder diffraction and UV–VIS spectroscopy. A possible arrangement of the dye molecules in the intercalates was suggested on the basis of their chemical compositions and interlayer distances, by taking into account van der Waals dimensions of the guest molecules and by assuming that the structure of the host layers is not changed during the intercalation process.     

Changes in the physicochemical properties of transferrin upon chemical derivatization with ceramides

The interaction of native and derivatized transferrin with lecithin, cholesterol and their mixtures was studied using monomolecular layers of phospholipids. Moreover, the thermodynamic parameters corresponding to these interactions: the mixing excess free energy, interaction energy, and interaction parameter were also calculated.The ability of these two proteins to insert into monolayers was studied working at constant area.The formation of aggregates or secondary structures in solution was determined by the fluorescence and polarization values of ANS (anilinonaphthalene sulfonate), measured at different protein/ANS relationships.Abbreviations TF Transferrin - DTF derivatized transferrin - PC lecithin - CHOL cholesterol - CER ceramides - ANS anilinonaphthalene sulfonate - TNBS trinitro benzenesulfonate method     

New fluorescent probes for the detection of mixed sodium and potassium metal ions

A new fluorescent probe 2 is developed that is capable of measuring the concentration of a mixture of sodium and potassium ions in the solution. This probe contains a fluorophore that is utilized in two ways depending on the pH of the solution.     

Mixed micellization of an anionic gemini surfactant (GA) with conventional polyethoxylated nonionic surfactants in brine solution at pH 5 and 298 K

The micellization behavior of an anionic gemini surfactant, GA with nonionic surfactants C₁₂E₈ and C₁₂E₅ in presence of 0.1 M NaCl at 298 K temperature, has been studied tensiometrically in pure and mixed states, and the related physicochemical parameters (cmc, γ _cmc, pC ₂₀, Γ _max, and A _min) have been evaluated. Tensiometric profile (γ vs log [surfactant]), for conventional surfactants, generally consists of a single point of intersection; a gradually decreasing line (normally linear, or with slight curvature) ultimately saturates in γ at a particular [surfactant], corresponding to complete monolayer saturation. The gemini, in this report, led to two unequivocal breaks in the tensiometric isotherm. An attempt to the interpretation of the two breaks from molecular point of view is provided, depending solely on the chemical structure of the surfactant. The gemini, even in mixed state with the conventional nonionic surfactants C₁₂E₅ and C₁₂E₈, manifested the dual breaks; of course, the dominance of the feature decreases with increasing mole fraction of the nonionics in the mixture. Theories of Clint, Rosen, Rubingh, Motomura, Georgiev, Maeda, and Nagarajan have been used to determine the interaction between surfactants at the interface and micellar state of aggregation, the composition of the aggregates, the theoretical cmc in pure and mixed states, and the structural parameters according to Tanford and Israelachvili. Several thermodynamic parameters have also been predicted from those theories.