The Reactivity of Bis(para‐methoxyphenyl)telluroxide towards Triflic Acid and Diphenylphosphinic Acid. Theoretical Considerations of the Protonation and Hydration Process of Diorganotelluroxanes

The reaction of (p‐MeOC₆H₄)₂TeO with two equivalents of HO₃SCF₃ and HO₂PPh₂ provided the tetraorganoditelluroxanes (F₃CSO₃)(p‐MeOC₆H₄)₂TeOTe(p‐MeOC₆H₄)₂(O₃SCF₃) ( 1 ) and (Ph₂PO₂)(p‐MeOC₆H₄)₂TeOTe(p‐MeOC₆H₄)₂(O₂PPh₂)·2 Ph₂PO₂H ( 2 ) in good yields. Compounds 1 and 2 were characterized by solution and solid‐state ³¹P and ¹²⁵Te NMR spectroscopy, IR spectroscopy, electrospray mass spectrometry, conductivity measurements and single crystal X‐ray diffraction. In solution, compound 1 undergoes an electrolytic dissociation and reversibly reacts with traces of water to give the mononuclear cation [(p‐MeOC₆H₄)₂TeOH]⁺ and triflate anions. Theoretical aspects of the protonation and hydration of model telluroxanes R₂TeO (R = H, Me, Ph) were investigated by preliminary DFT calculations and compared to the corresponding selenoxanes R₂SeO. The tellurium dihydroxides R₂Te(OH)₂ seem to be more stable than the hydrogen‐bonded complexes R₂TeO·H₂O.     

Specific determination of 20 primary aromatic amines in aqueous food simulants by liquid chromatography-electrospray ionization-tandem mass spectrometry

A multi-analyte method without any pre-treatment steps using reversed-phase liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) was developed and applied for the determination of 20 primary aromatic amines (PAA) associated with polyurethane (PUR) products or azo-colours. The method was validated in-house for water and 3% acetic acid food simulants using spiked migrates from plastic laminates. Detection limits ranged from 0.27 to 3 microg amine/L food simulants, and RSD values of within-laboratory reproducibility at the 2 microg PAA/L level ranged from 3.9 to 19%. PAA migration from plastic laminates and black nylon cooking utensils were determined with the method, and high levels of 4,4'-methylenedianiline and aniline were found in migrates from about half of the tested cooking utensils. The method fulfils present legislative demands in the EU for screening and verification of PAA migration from food contact materials.     

A boxmodel development to study the relationships between the photo-oxidants and the particles formation in the troposphere

The model BAGS (Boxmodel for Aerosol and Gasphase Simulations) has been developed. It is composed of two major modules: the first one describes the system of the chemical reactions in the gaseous phase, the second one calculates the aerosol chemical composition and the dimensional distribution of the particles. The boxmodel has been developed with the introduction of new chemical and physical processes, not previously included, in particular the formation of Secondary Organic Aerosol. The other implemented processes are a module for the dynamic of the particle population, nucleation, coagulation and dry deposition. The last phase of the work has been a check of the BAGS capabilities by a series of tests, that have permitted to compare it with other models (MAPS and MADM). The tests in particular have concerned the aerosol water content prediction, the photochemistry, the condensation of the inorganic compounds and the formation of Secondary Organic Aerosol.     

Coexistence of multiple conformations in cysteamine monolayers on Au(111)

The structural organization, catalytic function, and electronic properties of cysteamine monolayers on Au(111) have been addressed comprehensively by voltammetry, in situ scanning tunneling microscopy (STM) in anaerobic environment, and a priori molecular dynamics (MD) simulation and STM image simulation. Two sets of voltammetric signals are observed. One peak at -(0.65-0.70) V (SCE) is caused by reductive desorption of cysteamine. The other signal, at -(0.25-0.40) V consists of a peak doublet. The pH dependence of the latter suggests that the origin is catalytic dihydrogen evolution. The doublet feature is indicative of two distinct cysteamine configurations. Cysteamine monolayer formation from initial nucleation to a highly ordered phase has been successfully observed in real time using oxygen-free in situ STM. Random cellular patterns, disordered adlayer formation accompanied by high step edge mobility, and ultimately a highly ordered (square root 3 x 4) R30 degrees lattice are observed sequentially. Pits are formed due to enclosure of the mobile edges during the adsorption process. In the highly ordered cysteamine layer, each unit has two spots with apparent 0.6 A height difference in STM images. The coverage 5.7 +/- 0.1 x 10(-10) mol cm(-2) determined by voltammetry supports that the spots represent two individual cysteamine molecules. A priori MD and density functional simulations hold other clues to the image interpretation and indicate that the NH(3)(+) groups dominate the tunneling contrast. A wide range of interface structures, showing variations in the sulfur binding site and orientation, gauche and trans conformers, and especially hydrogen-bonding interactions, are examined, from which it is concluded that the adsorbate structure is controlled by interactions with the solvent rather than with the substrate.     

Synthese,Struktur und einige Reaktionen [N-(N′,N′,N″,N″-tetramethyl)-guanidinyl]-substituierter Phosphorylverbindungen

Synthesis, Structure, and some Reactions of N-(N′,N′,N″,N″-tetramethyl)guanidinyl-substituted Phosphoryl Compounds The tetramethylguanidinyl-substituted phosphoryl compounds 1 – 10 were prepared in the reaction of the appropriate chlorophosphoryl compounds with either N′,N′,N″,N″-tetramethylguanidine (HTMG) or N-trimethylsilyl-(N′,N′,N″,N″-tetramethyl)guanidine (TMSTMG). With methyl iodide 1 reacted with N-alkylation to give the ammonium salt 11. 1 reacted with BF₃ · Et₂O at both imino nitrogen atoms with formation of the bis-BF₃-adduct 12 . The X-ray structure determination of phenylphosphonic acid-bis(N′,N′,N″,N″-tetramethylguanidinide) 3 shows shortened PN-bonds and widened PNC-angles, consistent with the partial double bond character of the PN-bond.     

Watching photoinduced chemistry and molecular energy flow in solution in real time

Energized molecules are the essential actors in chemical transformations in solution. As the rearrangement of bonds requires a movement of nuclei, vibrational energy is often the driving force for a reaction. Vibrational energy can be redistributed within the "hot" molecule, or relaxation can occur when molecules interact. Both processes govern the rates, pathways, and quantum yields of chemical transformations in solution. Unfortunately, energy transfer and the breaking, formation, and rearrangement of bonds take place on ultrafast timescales. This Review highlights experimental approaches for the direct, ultrafast measurement of photoinduced femtochemistry and energy flow in solution. In the first part of this Review, we summarize recent experiments on intra- and intermolecular energy transfer. The second part discusses photoinduced decomposition of large organic peroxides, which are used as initiators in free radical polymerization. The mechanisms and timescales of their decarboxylation determine the initial steps of polymerization and the microstructure of the polymer product.     

XRD-Studies of SiC/Si layers on carbon substrates

Structural investigations of thin films of SiC, SiC with free silicon and various titanium suicides (TiSi₂, TiSi and Ti₅Si₃) are described. The crystal phases have been identified using X-ray diffractometry. The growth of reaction products from surface reactions between silicon and deposited titanium can be observed.Dedicated to Professor Dr. rer.nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Labeling vibrations by light: ultrafast transient 2D-IR spectroscopy tracks vibrational modes during photoinduced charge transfer

We report on a novel ultrafast two-dimensional infrared laser experiment that correlates vibrational bands of reactant and product of a photoreaction. The possibilities of this technique are demonstrated for the metal-to-ligand charge transfer (MLCT) in [Re(CO)3Cl(dmbpy)] (dmbpy = 4,4'-dimethyl-2,2'bipyridine) where we correlated the CO vibrational modes of the ground state and the MLCT state. A distinct vibrational mode is excited in the electronic ground state by an infrared laser pulse. This vibrational label survives the subsequent electronic excitation and can be followed in the excited electronic state. It is shown that the order of the vibrational energy levels is not preserved when exciting the molecule as was commonly assumed in the literature.     

A new synthesis of the 2,2,3,5,6,6-substituted tetrahydropyran aplysiapyranoid A and its 5-epimer

The vanadium(V)-catalyzed oxidation of bromide in the presence of methyl (E)-2-(1-hydroxy-1-methylethyl)-5-phenyl-4-hexenoate furnished 5,6-trans-5-bromo-6-phenyl-2,2,6-trimethyl-3-methyloxycarbonyltetrahydropyran, which was converted into the marine natural product aplysiapyranoid A and its 5-epimer, via a short sequence of decarboxylative bromination and transition metal-based procedures for transforming a phenyl into a chlorovinyl substituent.     

Tuning single nucleotide discrimination in polymerase chain reactions (PCRs): synthesis of primer probes bearing polar 4'-C-modifications and their application in allele-specific PCR

There are many methods available for the detection of nucleotide variations in genetic material. Most of these methods are applied after amplification of the target genome sequence by the polymerase chain reaction (PCR). Many efforts are currently underway to develop techniques that can detect single nucleotide variations in genes either by means of, or without the need for, PCR. Allele-specific PCR (asPCR), which reports nucleotide variations based on either the presence or absence of a PCR-amplified DNA product, has the potential to combine target amplification and analysis in one single step. The principle of asPCR is based on the formation of matched or mismatched primer-target complexes by using allele-specific primer probes. PCR amplification by a DNA polymerase from matched 3'-primer termini proceeds, whereas a mismatch should obviate amplification. Given the recent advancements in real-time PCR, this technique should, in principle, allow single nucleotide variations to be detected online. However, this method is hampered by low selectivity, which necessitates tedious and costly manipulations. Recently, we reported that the selectivity of asPCR can be significantly increased through the employment of chemically modified primer probes. Here we report further significant advances in this area. We describe the synthesis of various primer probes that bear polar 4'-C-modified nucleotide residues at their 3' termini, and their evaluation in real-time asPCR. We found that primer probes bearing a 4'-C-methoxymethylene modification have superior properties in the discrimination of single nucleotide variations by PCR.