17N+197Au反应中碎片与中子的符合测量

在3?3?.4MeV/u ¹⁷N束轰击¹⁹⁷Au靶产生的反应中,利用放置于不同角度组合的17个中子探测器(4°—83°)和14个半导体望远镜(2.3°—9.0°)对反应产物碎片与中子进行了符合测量.经对所得实验角分布积分得到Z=3—6元素的同位素产额分布.在参加者-旁观者模型框架下,采用¹⁷N原子核内部的不同密度分布计算了同位素产额分布并与实验数据做比较.     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

纳米WO3的制备及其光解水析氧性能研究

用溶胶凝胶法,灼烧法合成了纳米级WO3,采用X-射线衍射、紫外可见漫反射光谱对WO3进行表征.在Fe3 为电子受体、溶液酸度pH为2.0情况下,研究了纳米级WO3在365nm紫外辐射下光解水析氧的光催化活性,并讨论了不同方法制备的催化剂活性差异的原因.结果表明,结晶程度越高、尺寸越小、比表面积越大的纳米级WO3具有更高的光分解水析氧活性,电子受体的浓度、溶液的酸度对析氧活性有明显的影响.     

新型高色纯度弱电流猝灭性蓝色有机发光器件

以ADN为基质,分别以不同掺杂剂制备了四种蓝色有机发光器件,器件结构为:CuPc(12 nm)/NPB(40 nm)/AND∶Dopant(50 nm)/Alq(12 nm)/LiF(4 nm)/Al。掺杂剂有:BCzVB(amino-substituted distyrylarylenederivatives)、TBPe、BCzVBi和DSA-ph四种。研究了最佳掺杂浓度以及器件的亮度、电流密度、效率和色坐标等电学特性和光学特性。其中掺杂BCzVB制备了色纯度高、低电流猝灭性的蓝色有机发光器件,色坐标达到x=0.146,y=0.162,最大亮度为11600 cd/m2(15 V),电流效率为2.8 cd/A,流明效率为1.79 lm/W;以ADN为基质,分别以TBPe、BCzVBi和DSA-ph为掺杂剂,制备了另外三种对比器件。器件ADN∶TBPe色坐标为x=0.162,y=0.222(蓝绿光),效率随电流的增加而降低很快;器件ADN∶BczVBi有较好的色纯度(色坐标:x=0.164,y=0.146),但电流效率较低:2.03 cd/A,效率随电流的增加降低幅度也较快。器件ADN∶DSA-ph效率较高为8 cd/A,效率随电流增加变化幅度不大,但色纯度比较差(x=0.153,y=0.306),适合于做白色有机发光器件。     

Fuzzy Model of Regional Economic Competitiveness in GIS Spatial Analysis: Case Study of Gansu, Western China

After more than 20 years of impressive development since the economic reforms in 1978, today western China is facing an increasing development gap between its regions, particularly between urban and rural areas. Using the fuzzy comprehensive evaluation model, this paper aims to demonstrate the evolution of the economic competitiveness levels base on two categories of geographical unity in the province of Gansu located in Northwest China between 2000 and 2004. The results of fuzzy modeling are integrated into GIS spatiotemporal analyses in order to identify the spatial variation of each significant change in terms of the regional economic development. Our research effectively illustrates that there is a particular spatial dynamic of the economic development from region to region. Although the cities have improved very well in their economic competitiveness, the rural areas and minority regions still have a lot of progress to be achieved.     

Multiple periodic solutions of a delayed stage-structured predator–prey model with non-monotone functional responses

A delayed stage-structured predator–prey model with non-monotone functional responses is proposed. It is assumed that immature individuals and mature individuals of the predator are divided by a fixed age, and that immature predators do not have the ability to attack prey. Some new and interesting sufficient conditions are obtained for the global existence of multiple positive periodic solutions of the stage-structured predator–prey model. Our method is based on Mawhin’s coincidence degree and novel estimation techniques for the a priori bounds of unknown solutions to Lx = λNx. An example is given to illustrate the feasibility of our main result.     

X波段介质和金属膜片混合加载行波加速结构的传播特性计算及模型腔的有关研究

计算了X波段(f=9.37GHz)介质和金属膜片混合加载行波加速结构的TM₀₁模和HEM₁₁模的色散曲线, 结果表明HEM₁₁模的截止频率比TM₀₁模的低, 说明与盘荷波导相比, 该种新加速结构单束团的BBU效应得到改善.实验研究优选得到了适用于该种新加速结构的介质(ε_r=5.812). 采用MAFIA程序优化设计了模型腔, 测试频率与设计的数值吻合得很好.     

Interface solution for writing-induced nano-deformation of slider body

Writing-induced nano-deformation of slider body becomes a big concern when the mechanical spacing between the head and disk is continuously reduced to achieve higher magnetic recording areal density. Reduced head–disk spacing increases the risk of head/disk contact and causes the thermal instability in head–disk interface (HDI). This paper reports authors’ efforts towards exploration of interface solutions for writing-induced instability in ultra-low head–disk spacing magnetic system. Multi-shallow step structure with optimized rail position is analyzed and a new femto slider with such structure is explored. The results of numerical simulation indicate that the multi-shallow step structure is an effective approach in reducing the flying height change caused by the writing-induced nano-deformation of the slider body.     

全息模拟再现像的三维重构

提出一种全息模拟再现像的三维重构方法，可以模拟再现得到三维再现像.计算机模拟再现许多幅在不同深度位置的二维光强分布；利用灰度级变化的聚焦度评价方法，通过寻找最大聚焦度值，确定再现三维像各像点的深度信息.实验证明,该方法能实现模拟再现像的三维重构，使数字全息术有希望成为一种全新的三维面形检测技术.再现像三维重构的实现可以更客观地对全息图进行像质评价，并验证计算机制全息术算法的正确性.     

含有五边形—七边形缺陷的单壁纳米碳管的输运性质研究

运用第一性原理的密度泛函理论结合非平衡格林函数研究了含有五边形—七边形拓扑缺陷的纳米碳管异质结的输运性质.结果发现：拓扑缺陷对碳管的输运性质有很大影响；另外，不同类型的碳管形成的异质结的输运性质也有明显的差异. 关键词： 纳米碳管 输运性质 异质结 透射系数