Application of high-surface-area ZrO2 in preconcentration and determination of 18 elements by on-line flow injection with inductively coupled plasma atomic emission spectrometry

A flow-injection analysis (FIA) system incorporating a micro-column of ZrO2 has been used for the development of an on-line multi-element method for the simultaneous preconcentration and determination of Al, Bi, Cd, Co, Cr, Cu, Fe, Ga, In, Mn, Mo, Ni, Pb, Tl, V, Sb, Sn, and Zn by inductively coupled plasma atomic emission spectrometry (ICP-AES). The conditions for quantitative and reproducible preconcentration, elution, and subsequent on-line ICP-AES determination were established. A sample (pH 8) is pumped through the column at 3 mL min(-1) and sequentially eluted directly into the ICP-AES with 3 mol L(-1) HNO3. With a sample volume of 100 mL and an elution volume of 1 mL signal enhancement 100 times better than for conventional continuous aspirating systems was obtained for the elements studied. The reproducibility (RSD %) of the method at the 10 ng mL(-1) level in the eluate is acceptable - less than 8% for five replicates. Recoveries between 95.4% and 99.9% were obtained for the elements analysed. ZrO2, with a specific surface area of 57 m2 g(-1) and a capacity of approximately 5 mg g(-1) for the elements studied, was synthesized by hydrolysis of ZrCl4. The preconcentration system was evaluated for several simple synthetic matrices, standard water samples and synthetic seawater. The effect of foreign ions on the efficiency of preconcentration of the elements studied was investigated. The application of a micro-column filled with high-surface-area ZrO2 and flow injection inductively coupled plasma atomic emission spectrometry enables preconcentration and simultaneous determination of 18 elements at low concentrations (ng L(-1)) in different water samples.     

Four new cycloartane glycosides from Aquilegia vulgaris

Four new cycloartane glycosides, named aquilegiosides G-J, were isolated from the dried aerial parts of Aquilegia vulgaris. Their structures were determined by spectroscopic analysis and chemical evidence.     

Cationic copolymerization of indene with styrene derivatives: Synthesis of random copolymers of indene with high molecular weight

Random copolymers with high molecular weights of indene and p‐methylstyrene (pMeSt) were synthesized by cationic polymerization with trichloroacetic acid/tin tetrachloride in CH₂Cl₂ at low temperatures. When indene and pMeSt (1:1 v/v), for example, were polymerized at ?40 °C, both monomers were consumed at very similar rates to give a copolymer with high molecular weight [number‐average molecular weight (M_n): 8–9 × 10⁴]. This is indeed quite unexpected behavior for the combination of these two monomers because pMeSt polymerized over 1000 times faster than indene in the homopolymerization under the reaction conditions previously described. The product copolymer of indene and pMeSt had a random monomer sequence in it that was confirmed by NMR analyses and thermal‐property measurements. In sharp contrast with pMeSt, styrene and p‐chlorostyrene, which have no electron‐donating groups on the phenyl ring, led to low molecular weight polymers (M_n < 10,000) in the copolymerization with indene (1:1 v/v). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2449–2457, 2002     

Extraction equilibria for the 4-(2-Pyridylazo)-Resorcinol-Nickel(II)-Quaternary-Ammonium salt system

The extraction equilibria of nickel(II)-PAR complexes with tetradecyldimethylbenzylammonium chloride(Q⁺Cl^?) are investigated. Two kinds of nickel complex are extracted by chloroform: Ni(HR)₂,nQ⁺Cl^?₍₀₎(?⁵⁰⁰ = 3.73·10⁴l mol^?1cm^?1) at about pH 5 and 2Q⁺ NiR^2-_2(o)(?⁵⁰⁰ = 8.08·10⁴ l mol^?1 cm^?1) at above pH 8.5. The extraction constant for 2Q⁺ NiR^2-_2(o) was evaluated as [2Q⁺ NiR^2-₂]₀/[NiR^2-₂] [Q⁺]² = 10^11.16 at μ = 0.1 (Na₂SO₄. Synergic extraction studies of the Ni(HR)₂ species under slightly acidic conditions show that the species is Ni(HR)₂(H₂O)₂in auqeous solution and is extracted into chloroform as the adduct Ni(HR)₂(TBP)₂ (?⁵³⁵ = 3.57·10⁴ l mol^?1 cm^?1. Based on the extraction behavior of these complexes, the structures of the Ni²⁺—PAR complexes are discussed.     

ESTIMATION OF AN INDEX OF HYDROPHOBICITY OF DNA INTERIOR USING 5-METHOXYPSORALEN AS A FLUORESCENT PROBE

The index of hydrophobicity of DNA interior was estimated by measuring fluorescence spectra of psoralen derivatives associated with DNA. The environment around 5-MOP associated with DNA was as hydrophobic (D_k = 34) as methanol, suggesting that the molecules reside at the space between the base-pairs in B-form DNA. This is also true for 8-MOP. Thus, planar and aromatic molecules of 5- and 8-MOP are more stable in the interior of DNA than in aqueous medium due to hydrophobic affinity.     

Ultra-slow Relaxation Dynamics in Triglycine Sulfate and D-Sorbitol Studied by Time-resolved Spectroscopy

The ultra-slow modes with a relaxation time much longer than 1 ns are discovered by a time-resolved spectroscopy in uniaxial ferroelectric (NH₂CH₂COOH)₃H₂SO₄ (TGS) and in glass-former HOCH₂(CHOH)₄CH₂OH (D-sorbitol). A mode discovered in TGS is a thermal relaxational mode and is proved to be the physical origin of the central peak found by Brillouin scattering. Two modes are discovered in D-sorbitol. One is a thermal relaxational mode. The other is a mode characterized by the Kohlraush-Williams-Watts function with a relaxation time _R. A remarkable result is that _R indicates a critical behavior not at the liquid-glass transition temperature T_g =–7°C but at the ergodic to nonergodic transition temperature T_c=33°C.This revised version was published online in November 2005 with corrections to the Cover Date.     

Rhodamine B amine as a highly sensitive fluorescence derivatization reagent for saccharides in reversed-phase liquid chromatography

6-Rhodamine B amine functions as a highly sensitive fluorescence derivatization reagent for mono- and oligosaccharides; it reacts with the reducing end of saccharides under acidic conditions. The fluorescent derivatives of five monosaccharides can be separated within 25 min by reversed-phase liquid chromatography with isocratic elution. The detection limits (S/N = 3) for mono-, di-, and oligosaccharides are 7-51, 13, and 9-35 fmol/20 microl injection, which correspond to analyte concentrations of 35-255, 65, 45-175 nM, respectively. We have applied this derivatization method successfully to the analysis of the components of oligosaccharides in glycoproteins (ribonuclease B and fetuin) following their acidic or enzymatic hydrolysis. The results from these analyses are in good agreements with the reported values established previously.     

Solvent effect on the radical polymerization of di-n-butyl itaconate

Solvent effect on the polymerization of di-n-butyl itaconate (DBI) with dimethyl azobisisobutyrate (MAIB) was investigated at 50 and 61°C. The solvents used were found to affect significantly the polymerization. The polymerization rate (R_p) and the molecular weight of the resulting polymer are lower in more polar solvents. The initiation rate (R_i) by MAIB, however, shows a trend of being rather higher in polar solvents. The stationary state concentration of propagating poly(DBI) radical was determined by ESR in seven solvents. The rate constants of propagation (k_p) and termination (k_t) were evaluated by using R_p, R_i, and the polymer radical concentration observed. The k_p value decreases fairly with increasing polarity of the solvent used, whereas k_t is not so influenced by the solvents. The solvent effect on k_p is explained in terms of a difference in the environment around the terminal radical center of the growing chain. Copolymerization of DBI with styrene (St) was also examined in three solvents with different physical properties. The poly(DBI) radical shows a lower reactivity toward St in a more polar solvent.     

Module-based assembly of copper(II) chloranilate compounds: syntheses, crystal structures, and magnetic properties of [[Cu(2)(CA)(terpy)(2)][Cu(CA)(2)]](n)() and [[Cu(2)(CA)(terpy)(2)(dmso)(2)][Cu(CA)(2)(dmso)(2)](EtOH)](n)(H(2)CA = chloranilic acid, terpy = 2,2':6',2' '-terpyridine, dmso = dimethyl sulfoxide)

Two new copper(II) compounds of chloranilate and 2,2':6',2' '-terpyridine have been synthesized, and the structures have been solved by the single-crystal X-ray diffraction method. The crystal structure of [[Cu(2)(CA)(terpy)(2)][Cu(CA)(2)]](n)(1), where H(2)CA = chloranilic acid and terpy = 2,2':6',2' '-terpyridine, consists of two modules, the dimer unit [Cu(2)(CA)(terpy)(2)](2+) and the anionic mononuclear unit [Cu(CA)(2)](2)(-), forming an alternated chain. The chain is stabilized by semicoordinating and additional but efficient secondary bonding interactions. The crystal structure of [[Cu(2)(CA)(terpy)(2)(dmso)(2)][Cu(CA)(2)(dmso)(2)](EtOH)](n)(2), where dmso = dimethyl sulfoxide, consists of solvent molecules and two discrete modules, the dimer unit [Cu(2)(CA)(terpy)(2)(dmso)(2)](2+) and the anionic mononuclear unit [Cu(CA)(2)(dmso)(2)](2)(-). The dimer units form a layer by secondary bonding interactions, and the monomer units and ethanol molecules are introduced between the layers. The magnetic properties of 1 and 2 have been investigated in the temperature range 2.0-300 K. A weak ferromagnetic interaction was observed in 1, J(a) = 2.36 cm(-)(1) and zJ(b) = -0.68 cm(-)(1) while no exchange coupling was observed in 2.     

Aryl-aryl coupling reaction using a novel and highly active palladium reagent prepared from Pd(OAc)2, 1,3-bis[diphenylphosphino]propane (DPPP), and Bu3P

A palladium-assisted coupling reaction of aryl triflate with arene was investigated, and a novel Pd reagent prepared from equimolar Pd(OAc)2, 1,3-Bis[diphenylphosphino]propane (DPPP), and Bu3P was developed. This method is useful for intramolecular biaryl coupling reactions, not only between aryl triflate and arene (triflate-amide), but also between aryl halide and arene (halo-amide).