1,4‐Addition polymerization of 1,4‐bis(4‐benzylpyridinium)butadiyne triflate in a dipolar aprotic solvent

1,4‐Bis(4‐benzylpyridinium)butadiyne triflate was aggregated in dimethylformamide and spontaneously converted into the 1,4‐addition type of polydiacetylene. The polymerization took place in a dipolar aprotic solvent with a large dielectric constant that could enhance the aggregation of the ionic diacetylene salt through the electrostatic interaction. The molecular weight of the diacetylene was leveled off after 30 h at 80 °C to reach 1.5 × 10⁴ (number‐average molecular weight) that consisted of the 1,4‐addition type of polydiacetylene similar to polydiacetylenes obtained in the conventional solid‐state polymerization. Electron spin resonance spectra revealed that diradicals were generated at the earlier state aggregation to give rise to a solution polymerization. The UV spectra also suggested the presence of the activated aggregation associated with the polymerization as well as the eximer emission spectra. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3534–3541, 2002     

Interconversion behavior of the C-H bond in the CH4+ radical cation: ab initio molecular dynamics study

Thermal motion of CH4+ is investigated by performing an ab initio molecular dynamics method with the second-order M?ller-Plesset (MP2)/6-311G** force field. In the trajectories obtained at 400 K, we have observed rapid interconversion behavior of the geometrical parameters of CH4+ with the frequency of 0.6/ps, where the C-H pair forming the small angle around 55 degrees is switched to another pair on subpicosecond time scale. The switching patterns are found to be classified into the following two types. Type 1: one C-H of the small angled C-H pair is switched to one C-H of the other C-H pair. Type 2: the small angled C-H pair is switched to the other C-H pair, which has been newly observed in the present ab initio MD calculation. The four C-H bonds of CH4+ are characterized by the long and short C-H bonds in a time region of the trajectories, and also for the time-evolution of C-H bonds such interconversion behavior is observed. The switching patterns of the geometrical parameters are compared with those in the interconversion scheme between six equivalent C2v symmetry structures of CH4+ [Paddon-Row, M. N. et al., J Am Chem Soc 1985, 107, 7696]. We have also investigated the electronic energy fluctuation due to thermal motion of CH4+. The standard deviation of total electronic energy at 400 K is evaluated to be 1.2 kcal/mol.     

ESTABLISHMENT and CHARACTERIZATION OF A MONOCLONAL ANTIBODY RECOGNIZING THE DEWAR ISOMERS OF(6–4)PHOTOPRODUCTS

Abstract— We established a monoclonal antibody(DEM–1) that recognizes UV-induced DNA damage other than cyclobutane pyrimidine dimers or(6–4)photoproducts. The binding ofDEM–1 antibody to 254 nm UV-irradiated DNA increased with subsequent exposure to UV wavelengths longer than 310 nm, whereas that of the 64M-2 antibody specific for the(6–4)photoproduct decreased with this treatment. Furthermore, the increase inDEM–1 binding was inhibited by the presence of the 64M-2 antibody during the exposure. We concluded that theDEM–1 antibody specifically recognized the Dewar photoproduct, which is the isomeric form of the(6–4)photoproduct. TheDEM–1 antibody, however, also bound to DNA irradiated with high fluences of 254 nm UV, suggesting that 254 nm UV could induce Dewar photoproducts without subsequent exposure to longer wavelengths of UV. Furthermore, an action spectral study demonstrated that 254 nm was the most efficient wavelength for Dewar photoproduct induction in the region from 254 to 365 nm, as well as cyclobutane dimers and(6–4)photoproducts, although the action spectrum values in the U V-B region were significantly higher compared with those for cyclobutane dimer and(6–4)photoproduct induction.     

POE incorporation into ionic clusters of ionomer and ion-conduction behaviors

Poly(oxyethylene) (POE) was incorporated into the ionic clusters of ionomers, ethylene and methacrylic acid (7.2% neutralized with KOH) copolymer membrane. The changes of properties were studied from SAXS, DSC, IR and ionic conductivity. The IR study suggested that the coordinated structures in ionic clusters of the membrane were destroyed by POE incorporation, and also SAXS suggested that ionic clusters were swollen by POE incorporation. The ionic conductivity, a carrier being K⁺ in this system, increases from 10^?16 S/cm to 10^?9 S/cm at 30°C by the incorporation of POE (20.5 wt%). On the other hand, a large amount of POE (63 wt%) could be incorporated into ionomer membrane by the esterification of methacrylic acid groups (93%) with POE. When LiClO₄ was added, ionic conduction occurred in the phase-separated POE domain, which had a low glass transition temperature (?55.2°C), showing an ionic conductivity 2.6 × 10^?6 S/cm at 25°C.     

Multiple and irreversible binding of cis-diamminedichloroplatinum(II) to human serum albumin and its effect on warfarin binding.

Irreversible bindings of cis-diamminedichloroplatinum(II) (cis-DDP) to human serum albumin (HSA) were investigated in a pH 7.4 buffer containing 0.1 M NaCl at various molar ratios (cis-DDP/HSA) up to 60 over a 14 d period (37 degrees C). The metal binding seemed to reach a plateau when incubated at less than 10 times excess of cis-DDP. As the molar ratio increased, the reaction rate was relatively fast within the first day, followed by a moderate increase in the metal binding. When incubated at 60 times excess of cis-DDP, the metal bound as much as 20 mol per mol of HSA in 14 d. Fluorescence quenching of the metal-bound protein suggested that the tryptophan residue was gradually exposed to a hydrophilic environment as the metal binding increased. Furthermore, cis-DDP cleaved disulfide bonds at the ratio of 1 mol of disulfide bond per 5.3 mol of the metal binding. It was therefore suggested that the metal binding also occurred at several sites other than the disulfide bond. Warfarin binding to the metal-bound protein, examined by fluorescence changes, also decreased with increasing metal binding or cleavage of the disulfide bonds. Thus, cis-DDP bound to multiple sites in addition to the lone sulfhydryl group (Cys-34), suggesting that massive conformational changes of the protein took place.     

Application of pure silica gel as cation-exchange stationary phase in lon chromatography with indirect photometric detection for common mono-and divalent cations using aromatic monoamines as eluents

Summary A pure silica gel (Pia Seed 5S-60-SIL), synthesized by the hydrolysis of pure tetraethoxysilane [Si(OCH₂CH₃)₄], was applied as a cation-exchange stationary phase in ion chromatography with indirect photometric detection for common mono-and divalent cations (Li⁺, Na⁺, NH₄ ⁺, K⁺, Mg²⁺, and Ca²⁺) using various protonated aromatic monoamines (tyramine [4-(2-aminethyl) phenol], benzylamine, phenylethylamine, 2-methylpyridine and 2,6-dimethylpyridine) as eluet ions. When using 0.75 mM tyramine-0.25 mM oxalic acid-1.5 mM 18-crown-6 (1,4,7,10,13,16-hexaoxacyclooctadecane) at pH 5.0 as the eluent, excellent simultaneous separation and highly sensitive detection at 275 nm for these mono-and divalent cations were achieved on the Pia Seed 5S-60-SIL column (150×4.6 mm I.D.) in 20 min.     

Stark absorption spectroscopy of indole and 3-methylindole

Indole and 3-methylindole (3-MI) doped into a polymethylmethacrylate (PMMA) film are studied by the Stark absorption (electroabsorption) spectroscopy. The 1La and 1Lb absorption bands are distinguished and the change in permanent dipole moment on 1La excitation is determined by a model fit to the measured absorption and electroabsorption spectra. Analysis of the spectra, measured at normal incidence and magic angle conditions, proved the essential role of the electric-field-induced orientation/alignment effects for polar indole and 3-MI molecules in the PMMA environment at room temperature.     

A theoretical study of alcohol oxidation by ferrate

The conversion of methanol to formaldehyde mediated by ferrate (FeO(4)2-), monoprotonated ferrate (HFeO4-), and diprotonated ferrate (H2FeO4) is discussed with the hybrid B3LYP density functional theory (DFT) method. Diprotonated ferrate is the best mediator for the activation of the O-H and C-H bonds of methanol via two entrance reaction channels: (1) an addition-elimination mechanism that involves coordination of methanol to diprotonated ferrate; (2) a direct abstraction mechanism that involves H atom abstraction from the O-H or C-H bond of methanol. Within the framework of the polarizable continuum model (PCM), the energetic profiles of these reaction mechanisms in aqueous solution are calculated and investigated. In the addition-elimination mechanism, the O-H and C-H bonds of ligating methanol are cleaved by an oxo or hydroxo ligand, and therefore the way to the formation of formaldehyde is branched into four reaction pathways. The most favorable reaction pathway in the addition-elimination mechanism is initiated by an O-H cleavage via a four-centered transition state that leads to intermediate containing an Fe-O bond, followed by a C-H cleavage via a five-centered transition state to lead to formaldehyde complex. In the direct abstraction mechanism, the oxidation reaction can be initiated by a direct H atom abstraction from either the O-H or C-H bond, and it is branched into three pathways for the formation of formaldehyde. The most favorable reaction pathway in the direct abstraction mechanism is initiated by C-H activation that leads to organometallic intermediate containing an Fe-C bond, followed by a concerted H atom transfer from the OH group of methanol to an oxo ligand of ferrate. The first steps in both mechanisms are all competitive in energy, but due to the significant energetical stability of the organometallic intermediate, the most likely initial reaction in methanol oxidation by ferrate is the direct C-H bond cleavage.     

Evaluation of phenyldimethylethoxysilane treated high-performance thin-layer chromatographic plates. Application to analysis of flavonoids inScutellariae radix

Summary The retention and selectivity of flavonoids (baicalin, baicalein, wogonin, oroxylin A) inScutellariae radix have been studies by high-performance thin-layer chromatography on phenyldimethylethoxysilane-treated silica plates. The silica plates treated with phenyl groups were used for physical and chemical analysis. From elemental carbon analysis, the maximum number of bonded phenyl surface groups per gram was calculated to be 0.467×10²¹ (Oginal silica plate: Merck Art. 15109, Silica gel 100 F₂₅₄). With methanol-1/15 M phosphate buffer (pH 6.2) mixtures as mobile phase, baicalin, baicalein, wogonin, and oroxylin A inScutellariae radix were separated. It has been shown that phenyl-treated plates are more suitable for selective separation of baicalin, baicalein, wogonin, and oroxylin A than octadecyl-treated plates.     

Effect of temperature on the mechanism of retention of fullerenes in liquid chromatography using various alkyl bonded stationary phases

Summary The temperature-dependency of the separation of fullerenes in liquid chromatography (LC) has been examined using various alkyl bonded stationary phases. It has been found that a maximum retention temperature exists with long alkyl bonded stationary phases, whereas there is no similar effect with the newly synthesized alkyl bonded phases which have two phenyl groups at the base of the bonded phase. The interpretation of the retention behavior of fullerenes in the low temperature region on alkyl bonded stationary phases is discussed using information obtained by CP-MAS solid-state NMR spectroscopy and LC.