三角B-B曲面在非结构网格生成中的应用

基于生成非结构化网格的Delaunay三角形化方法,应用三次三角Bernstein-Bézier曲面来控制网格点的分布情况。对于给定边界,利用三次非均匀B样条进行边界的拟合及重新离散。对初始化形成的Delaunay三角形,应用三次三角Bernstein-Bézier曲面来计算位于其中的点的长度标尺,通过对三角Bernstein-Bézier曲面边界点的定义来控制三角形内长度标尺的分布。对复杂通道网格剖分的实例表明,此方法可以很好地控制内部网格点的分布情况。     

Method for vessel attitude estimation by spatial correlation function for bottom reverberation

Under the assumption that the sea bottom is an almost-flat and randomly rough thin layer, a spatial correlation model for bottom reverberation is constructed. At high signal noise ratio, the phase of the spatial correlation function is the product of sound wave number and the vertical vector between two hydrophones. In a nominally horizontal plane, roll and pitch bring on the vertical vector between the hydrophones. Then an equation including roll, pitch and the phase of the spatial correlation function is found. If a parallelogram can be constructed by 3 hydrophones and the rat ios of its acreage to diagonals are not smaller than half of the wavelength, roll and pitch can be obtained analytically or by optimal method. However, the ranges of roll and pitch are restricted because of the phase ambiguity. Using Fisher information matrix, the Cramer-Rao lower bound is obtained. Results from computer simulation and sea test data prove the feasibility of the method.     

基于界面跟踪方法的汽蚀模型和算法的有效性验证

针对两相附着汽蚀流动机理,基于界面跟踪方法发展了新的汽蚀模型和算法。所发展的汽蚀模型和算法不仅考虑了液相／气相界面处的压力差,而且考虑了耦合Reynolds-Averaged Navier-Stokes方程求解技术得到的流场压力梯度信息来迭代计算附着汽蚀形状。采用具有试验数据的半球形头部圆柱体汽蚀绕流作为算例来验证所提出的汽蚀模型和算法的有效性。采用不同的网格数和松弛因子数值验证了发展的汽蚀模型和算法的有效性。三种汽蚀数下的数值计算结果得到的压力系数分布与试验数据完全吻合。结果表明所提出的汽蚀模型和算法能够准确模拟出汽蚀发生点和汽蚀长度。     

用于原子吸收光谱仪的高灵敏度燃烧器

本文介绍了一种用于原子吸收光谱仪的气－样分进、双通道燃烧器，经过实际检测比较，该坷提高原子吸收灵敏度１￣５倍，且稳定性好。     

THE ELECTRON-BEAM IRRADIATION ON THE HIGH TEMPERATURE SUPERCONDUCTING THIN FILMS: A NUMERICAL SIMULATION OF THE LOW TEMPERATURE SCANNING ELECTRON MICROSCOPY

Low-temperature scanning electron microscopy (LTSEM) is a promising measuring technique for probing the spatial distribution of the superconducting properties of the high-temperature superconducting (HTS) thin films. A theoretical analysis of the electron-beam irradiation on the HTS thin films in the LTSEM has been carried out. An inhomogeneously distributed grain array model has been applied in the analysis, and some numerical sim-ulations have been carried out on the electron-beam induced voltage (EIV) signals in the LTSEM experiments. The comparisons of our numerical results with the LTSEM experi-mental data indicate that it is quite reasonable to use a two-dimensional Josephson junction array for stimulating the inhomogeneous HTS thin film sample. Our numerical results also show that the EIV signals are influenced by the electron-beam power used in the LTSEM, and a reduction of the electron-beam power is suggested in order to eliminate the errors in estimating the local values of critical temperature T_c and critical current I_c by the sample temperature and the bias current at which the first EIV signal occurs.     

V2O5-Ag2O/η-Al2O3催化剂上甲苯氧化制苯甲醛的研究

制备了一系列负载型V—Ag—Al—O催化剂并用于甲苯的气相选择氧化制苯甲醛反应，考察了催化剂组成对反应性能的影响．研究发现，V205负载量为12．5％、Ag2O负载量为7．5％并经773K活化的4号催化剂，在空速467．6h-1，温度663K时反应，得到了甲苯转化率49．58％、苯甲醛选择性29．22％的较好结果．用XRD、XPS、SEM等测试手段，对催化剂进行了结构表征．     

新的酰胺型开链冠醚的合成与性质

Simon在70年代开发了一类酰胺型开链冠醚,能选择性配位碱土金属离子并可作为中性载体制备离子选择性电极.由于酰胺型开链冠醚易于制备,因此受到人们广泛地重视.Vgtle等提出的“末端基”概念为开链冠醚的合成、设计起了重要的指导作用.前文报道2-甲氧基-1-氨甲基萘与三甘醇二碘化物在无水碳酸钠存在下于乙腈中反应得到双手臂的套索冠醚与碘化钠的配合物.X射线衍射晶体结构分析表明萘环上的甲氧基中的氧原子参加了与钠离子的配位,生成了扭曲的六边形双锥结构配合物.因此2-甲氧基-1-氨基萘可以作为开链冠醚的“末端基”.开链冠醚的合成路线是:     

FTIR和ESR法研究离聚体溶液中的离子相互作用

磺化乙丙三元共聚物(SEPDM)离聚体在二甲苯/5％正己醇混合溶剂中具有特异的粘浓关系和粘温关系,估计是由于金属离子被己醇溶剂化而影响离子间相互作用引起的,但尚未有更多的实验数据加以验证.本文用FTIR和ESR方法对SEPDM离聚体溶液作进一步考察,发现金属离子与己醇确实存在溶剂化效应,溶剂化程度与离子的大小、浓度和温度有关,它直接影响离子在溶液中存在的状态(单离子或离子聚集体),这些结果为从分子水平了解离聚体溶液性质提供了理论根据.用波谱方法研究离聚体溶液中的离子相互作用尚鲜见报道.     

聚丙烯/POE共混组成对材料断裂行为的影响

采用基本断裂功(EWF)方法对聚丙烯(PP)/聚烯烃弹性体(POE)共混物的注射双边缺口拉伸试样的断裂行为进行了研究,比较了不同POE含量对共混物各断裂参数的影响.结果表明,PP和用量为5phr POE的共混物都可完全满足EWF方法的要求,共混物的断裂韧性-比基本断裂功we,较PP有显著提高;POE用量为10phr以上的共混物则出现明显的成颈现象而限制了EWF方法的应用;PP和各种POE用量的共混物都得到了其屈服所需要的比基本断裂功we,y和比塑性功β′wp,y.