A polyaniline-containing filter paper that acts as a sensor, acid, base, and endpoint indicator and also filters acids and bases

In this paper we report a new idea for synthesizing polyaniline in an ordinary filter paper. The synthesis was carried out by a process in which aqueous acidic aniline solution and the oxidizing agent H(2)O(2) was added to the paper drop by drop and in sequence. Uniform polymerization could be obtained with the addition of reagents in either sequence. The polymer formation led to a green coloration of the paper. Formation of the emeraldine salt of polyaniline was confirmed by UV-vis and FTIR spectroscopy. Scanning electron microscopic measurements were made for surface characterization of the polymer formed in the paper. The same paper was used as a sensor for ammonia in vapor and in solution, for acid and base as well as endpoint indication, and also to filter acids and bases. We found that, using the polymer-containing paper, ammonia concentrations in a solution as low as 14 ppm could be measured.     

Trapping Copper Phthalocyanine in a Silica Sono-Xerogel

A copper phthalocyanine (CuPc) has been encapsulated in silica. The trapping effects were studied comparing the UV-Vis absorption spectra of some CuPc solutions and composites prepared under different conditions. The trapped organic molecules’ stability was monitored during the gelation and drying processes. Leachability test have been carried out with the aim of checking the trapping efficiency. Hydrolysis water of pH=2 and a molar ratioR _w =6 mol acid H₂O/mol TMOS leads to a higher CuPc stacking angle homogeneity. The increase of Pc induces a narrower mesopore distribution and helps the stabilization of the composite.     

A single amino acid Gly-tag enables metal-free protein purification

Analytically pure proteins are indispensable for diverse applications, including therapeutics. Here, we report a methodology where a single amino acid, glycine, enables metal-free protein purification. This robust platform is enabled by a Gly-tag resin for site-specific capture, enrichment, and release through chemically triggered C–C bond dissociation by resonance-assisted electron density polarization.

Gly-tag resin precisely captures and releases a protein with one glycine at the N-terminus. The user-friendly protocol delivers analytically pure protein free of metal contaminants.     

Enantioselective total synthesis of (+)-amphidinolide t1

An enantioselective first total syntheis of amphidinolide T1 (1) is described. Amphidinolide T1 (1), a 19-membered macrolide isolated from Amphidinium sp., has shown potent antitumor properties against a variety of NCI tumor cell lines. The synthesis is convergent and involves the assembly of C1-C10 segment 2 and C11-C21 segment 3 by an oxocarbenium ion-mediated alkylation and Yamaguchi macrolactonization sequence. The synthesis of fragment 2 involves an efficient cross metathesis and hydrogenation sequence between the terminal olefins of 5 and 6 to form the C4-C5 carbon-carbon bond. Enol ether 4 is designed to be the surrogate of fragment 3 where the sensitive C16-exo-methylene and the C13-hydroxyl group were protected as the bromoether derivative during the Lewis acid-catalyzed alkylation process. Both stereocenters in fragment 5 as well as the C2 and C3 stereocenters in fragment 4 are accessed by a highly diastereoselective ester-derived titanium enolate-mediated syn-aldol reaction. The bromoether derivative 24 was unraveled at the final stage of the synthesis, providing (+)-amphidinolide T1.     

Langmuir monolayers of the zwitterionic surfactant hexadecyl 1-N-L-tryptophan glycerol ether

We report the formation of Langmuir monolayers of pure zwitterionic hexadecyl 1-N-L-tryptophan glycerol ether (C(16)-TGE) surfactant and mixed monolayers of cationic-zwitterionic surfactant obtained modifying the pH of the subphase. The pressure-area and surface potential-area isotherms and fluorescence microscopy measurements have been used to characterize the surface phase transitions in the monolayers. These transitions appeared at larger areas as the pH decreased from 6.0 to 2.0 and almost disappeared as the pH decreased further. The analysis of the surface potential and the infrared reflection-absorption spectroscopy data suggests that the phase transition is associated with a change of orientation of both the hydrocarbon chain and the aromatic group of the surfactant with respect to the air-water surface. The surface rheology of the monolayers was studied by quasielastic light scattering and by the oscillatory barrier technique. The results indicate that there is at least one relaxation process in the monolayer.     

Photometric determination of trivalent gallium,indium and thallium with Xylenol orange

Summary Xylenol orange reacts very sensitively with gallium(III), indium (III) and thallium(III) to form reddish violet colored chelates having _max 560 nm in case of Ga and In and _max 590 nm in case of Ti at P_H 4.0. The molar ratio for all the chelates is 1 1 (metal reagent). Optimum conditions including the range for adherence to Beer's law, effect of P_H on the color intensity, effect of excess reagent, and sensitivity are reported for the photometric determination of these metal ions using Xylenol orange.

---

Zusammenfassung Xylenolorange reagiert sehr empfindlich mit Gallium(III), Indium(III) und Thallium(III) unter Bildung rötlich-violetter Chelate mit einem Absorptionsmaximum bei 560 nm im Falle von Ga und In bzw. 590 nm für Tl bei p_H 4,0. Das Molverhältnis ist in jedem Fall 11. Die besten Arbeitsbedingungen, der Gültigkeitsbereich des Beerschen Gesetzes, der Einfluß des P_H auf die Farbintensität und des Reagensüberschusses sowie die Empfindlichkeit werden für die photometrische Bestimmung der genannten Ionen angegeben.

     

Transmission electron microscopy and X-Ray diffraction analysis of aluminum-induced crystallization of amorphous silicon in alpha-Si:H/Al and Al/alpha-Si:H structures.

Solid phase crystallization of plasma-enhanced chemical-vapor-deposited (PECVD) amorphous silicon (alpha-Si:H) in alpha-Si:H/Al and Al/alpha-Si:H structures has been investigated using transmission electron microscopy (TEM) and X-ray diffraction (XRD). Radiative heating has been used to anneal films deposited on carbon-coated nickel (Ni) grids at temperatures between 200 and 400 degrees C for TEM studies. alpha-Si:H films were deposited on c-Si substrates using high vacuum (HV) PECVD for the XRD studies. TEM studies show that crystallization of alpha-Si:H occurs at 200 degrees C when Al film is deposited on top of the alpha-Si:H film. Similar behavior was observed in the XRD studies. In the case of alpha-Si:H deposited on top of Al films, the crystallization could not be observed at 400 degrees C by TEM and even up to 500 degrees C as seen by XRD.     

Ternary complexes of copper(II), nickel(II) and zinc(II) with nitrilotriacetic acid as a primary ligand and some phenolic acids as secondary ligands

Summary The formation of ternary complexes of the MAL^3– type [where M = Cu^II, Ni^II and Zn^II ; A = nitrilotriacetic acid (NTA); L = 1-hydroxy-2-naphthoic acid (1,2 HNA) and 2-hydroxy-1-naphthoic acid (2,1 HNA)] have been studied potentiometrically in 50% v/v aqueous — ethanol (25° and µ = 0.1). Under identical conditions the binary complexes of the 1,2- and 2,1-HNA ligands have also been examined. The values of mixed ligand formation constants K_MAL have been found to be lower than K_ML (first step formation constant of binary complexes) and even less than (second step formation constant of binary complexes).     

Photometric determination of palladium with chrome azurol S

Summary Chrome Azurol S permits a simple colorimetric determination of palladium with a sensitivity of 0.4g/cm² (practical) or 0.04g/cm² (Sandell), respectively. Conditions and interferences are described in detail.

---

Zusammenfassung Palladium läßt sich mit Hilfe von Chromazurol S auf einfache Weise kolorimetrisch bestimmen. Die praktische Empfindlichkeit der Methode beträgt 0,4g/cm² bzw. 0,04g/cm² nachSandell. Die Arbeitsbedingungen und die durch Fremdionen verursachten Störungen werden angegeben.

---

Résumé Le chromazurol S permet un dosage colorimétrique simple du palladium, avec une sensibilité de 0,4g/cm² (en pratique) ou 0,04g/cm² (Sandell) respectivement. On décrit en détail les conditions opératoires et les interférences.

     

A novel nitrate-selective electrode based on precipitated nitron nitrate

Summary A nitrate-selective electrode based on precipitated nitron nitrate in an epoxy resin matrix has been prepared. The lower detection limit is 10^–5 M, the optimum pH range is 2.0–8.5, and the response time is 1 min. The electrode is selective in presence of CH₃COO^–, SO₄ ^2–, C₂O₄ ^2–, PO₄ ^3–, NO₂ ^–, Cl^– and Br^–, but I^– interferes. Results for nitrate in soil samples were in agreement with values obtained spectrophotometrically.

---

Eine neue nitrat-spezifische Elektrode auf der Basis gefällten Nitronnitrats

Zusammenfassung Eine nitrat-spezifische Elektrode auf der Basis gefällten Nitronnitrats in einer Epoxyharz-Matrix wurde hergestellt. Die untere Nachweisgrenze ist 10^–5 M, das pH-Optimum liegt zwischen 2,0 und 8,5, die Reaktionszeit beträgt 1 Minute. Die Elektrode ist selektiv in Gegenwart von Acetat, Sulfat, Oxalat, Phosphat, Nitrit, Chlorid und Bromid; aber Jodid stört. Ergebnisse der Nitratbestimmung in Bodenproben stimmen mit spektrophotometrischen Resultaten überein.

---

---

Presented at the 8th International Microchemical Symposium, Graz, August 25–30, 1980.