Synthetic Access to New Pyridone Derivatives through the Alkylation Reactions of Hydroxypyridines with Epoxides

General methods for the preparation of a variety of pyridone and oxypyridine derivatives are described. 2‐,3‐,4‐Hydroxy pyridine and 2‐pyridinemethanol were alkylated with ethylene‐, propylene‐, and stryrene‐oxide and epichlorohydrin in the presence of different Lewis acids as a catalyst. The best yield of 3a was achieved in the presence of CdI₂/BF₃ · OEt₂. The corresponding pyridone derivatives (3a–d, 7a–d) were obtained from the reaction of 2‐and 4‐hydroxypyridine with oxiranes in good yields, whereas oxypyridine derivatives (5a–d, 9a,b) were obtained from reactions of 3‐hydroxypyridine and 2‐pyridinemethanol with oxiranes. Chlorohydrines (3d, 5d, 7d) were easily converted to corresponding epoxy derivatives (10, 11, 12) in basic medium; then amino alcohols (13–17) were obtained from the reaction of these epoxy derivatives with amines.     

Butyl methacrylate based monoliths with different cross‐linking agents using DMF‐aqueous buffer as porogen

A simple porogen containing only DMF and aqueous buffer was used for synthesis of monolithic stationary media for CEC). Butyl methacrylate (BMA)‐based capillary monoliths were obtained using proposed porogen together with acrylic/methacrylic cross‐linking agents with different alkyl chain lengths. For this purpose, ethylene glycol dimethacrylate, butanediol dimethacrylate and hexanediol diacrylate (HDDA) were used. The monoliths with better electrochromatographic separation performance were obtained when the acrylic cross‐linking agent with the longest alkyl chain length (i.e. HDDA) was used with the proposed porogen. The electrochromatographic separation of alkylbenzenes, phenols and benzoic acids were sucessfully performed in CEC particularly using poly(BMA‐co‐HDDA) monolithic stationary phase with the column efficiency up to 270 000 plates/m.     

Investigation of radiocesium biokinetics in Manila clam (Ruditapes philippinarum)

This study was carried out to better understand the biokinetics of radiocesium in clams living in sediment. The accumulation and depuration kinetics of ¹³⁴Cs were investigated in the Manila clam (Ruditapes philippinarum) under controlled laboratory conditions. The concentration factor was found to be 3.0 for ¹³⁴Cs in the whole body; however, the concentration factor in the soft part of the clams (12) was significantly higher than those in the whole body and shell (0.80). The depuration kinetics of the radionuclide were described by a two-component exponential model for the whole body. The biological half-lives in the fast and slow components were found to be 0.63 and 22.1 days, respectively. The depuration kinetics for ¹³⁴Cs in the soft parts were described by a single-component exponential model with a resultant the biological half-life of 18.0 days.     

Effects on molecular orientation and phase transition of addition of carbon nanotubes into liquid crystalline matrix

For practical guest–host applications, it is important to choose dyes with a high ability of orientation in the liquid crystal (LC) matrix. In this experimental work, two different azo-structured dyes (disperse yellow 3 and 7) were separately doped to each of two different nematic LCs (E7 and ZLI-1132). Their solubilities, textures, phase transition temperatures and order parameters were determined. At the second stage, single-walled carbon nanotubes (SWCNTs) in a small amount were separately added to each of these solutions, and the experiments were repeated as similar to the previous ones. The solubilities of dyes in the LC E7 were lower than those of ZLI-1132. Moreover, the highest order parameter value was attained with yellow 7 dye in ZLI-1132 nematic host. Co-use of nanoparticles (CNTs) as dopant resulted in notable increases in order parameters. These dyes and CNTs did not significantly destabilise the mesomorphic phase of nematic hosts. An appreciable change in textures was not monitored with addition of dopant(s). In addition, it was observed that the narrowing on the temperature range of the LC did not take place with the addition of dopants to the crystal; on the contrary, an increase was recorded.     

Reversible Immobilization of Urease by Using Bacterial Cellulose Nanofibers

In this work, bacterial cellulose nanofibers were produced by using the Gluconacetobacter hansenii HE1 strain. These nanofibers were derivatized with dye affinity ligand Reactive Green 5, and these newly synthesized dye-attached nanofibers were used for affinity adsorption of urease. Reactive Green 5-attached nanofibers were characterized by Fourier transform infrared spectroscopy, SEM, and energy-dispersive x-ray spectroscopy analysis. Some adsorption conditions which significantly affect the adsorption efficiency were investigated. The maximum urease adsorption capacity was found to be 240 mg/g nanofiber in pH 6.0 and at room temperature. Dye-free plain nanofibers also used for studying nonspecific urease adsorption onto plain nanofibers and nonspecific adsorption were found to be negligible (3.5 mg/g nanofiber). Prepared dye-attached nanofibers can be used in five successive adsorption/desorption steps without any decrease in their urease adsorption capacity. The desorption rate of the adsorbed urease was found to be 98.9 %. The activity of the urease was also investigated, and it was found that free and desorbed urease from the dye-attached nanofibers showed similar specific activity.     

Investigation of metal activation of a partially purified polyphenol oxidase enzyme electrode

Biosensors can be developed using different biological materials and immobilization technologies. Enzymes are generally used in biosensor construction, and some enzymes need metal ions or small organic molecules as a cofactor for their activation. Polyphenol oxidases can be activated by several metal ions such as Cu²⁺, Mg²⁺, Zn²⁺, Mn²⁺, and Ni²⁺. In this study, a new measurement method has been developed that is based on the metal ion activation of the polyphenol oxidase enzyme used in the biosensor preparation, especially to determine the concentration of Mg²⁺ ions. Polyphenol oxidase (PPO) (EC 1.10.3.1) was partially purified from potato (Solanum tuberosum) by using (NH₄)₂SO₄ precipitation, dialysis, and lyophylization processes. As a result of this processes, approximately 30-fold purification was achieved for PPO. For construction of the biosensor, the enzyme was immobilized on the dissolved oxygen probe membrane using gelatin and glutaraldehyde (2.5%). Using the biosensor, we obtained responses for catechol in the absence and presence of Mg²⁺ ions. Differences between the biosensor responses were related to the concentration of Mg²⁺ ions. The biosensor response depends linearly on concentration of Mg²⁺ ions between 0.05 and 7.5?mM. In the optimization studies, phosphate buffer (pH 7.0, 50?mM) and 35°C were determined to be the optimum conditions. This project will be a novel biosensor study and it might bring a new term, ‘activation based biosensor’ into the biosensor area.     

In-house validation for analytical methods and quality control for risk evaluation of chlordecone in food

Chlordecone was used until 1993 as a pesticide in the banana plantation of Martinique and Guadeloupe (French Antilles) against the root borer. This organochlorine pesticide was lipophilic, remnant, and toxic for human beings with both acute and chronic effects. Chlordecone was strongly absorbed and stored in soil and weakly decomposed in environment. Surveys conducted in 2001 revealed its presence in soil, rivers, and domestic food products. Local food (fruits and vegetables, cattle, poultry, and fish) was growing on soils, widely contaminated by chlordecone, used in the past as banana plantations. In 2003, French Administration asked for a risk evaluation for the Antilles population. The French Agency for Food Safety, proposed a Provisional Tolerable Daily Intake of 0.0005?mg?kg^?1?b.w.?day^?1, and an Acute Reference Dose of 0.01?mg?kg^?1?b.w.?day^?1, based on a toxicological risk assessment. The French National Reference Laboratory for pesticides has carried out two analytical methods, one for food of animal origin and another for food of fruit and vegetable origin. These methods were validated in the reference laboratory and dispatched to 13 laboratories for a proficiency test before the launch of two studies on Martinique and Guadeloupe food. About 900 samples from Martinique were sent to the network of laboratories for analysis of chlordecone. Performance parameters obtained through the proficiency test were briefly reported. The quality control test proposed in this study was discussed to shed light on the true variability achievable by intra-laboratory and inter-laboratory analysis. The limits of conventional quality-control procedures were discussed, and a process was proposed in order to get better confidence in analytical results.     

Synthesis, characterization, and biological evaluation of new oxime-phosphazenes

Hexachlorocylotriphosphazene (1) was reacted with 4-hydroxy-3-methoxybenzaldehyde to give hexakis[(4-formyl-2-methoxy)phenoxy]cyclotriphosphazene (2). Hexakis[(4-(hydroxyimino)2-methoxy)phenoxy]cyclotriphosphazene (3) was synthesized by reaction of 2 with hydroxlamine hydrochloride in pyridine. Compound 3 was reacted with benzyl chloride, acetyl chloride, allyl bromide, benzoyl chloride, propanoyl chloride, 4-methoxybenzoyl chloride, 2-chlorobenzoyl chloride, chloroacetyl chloride, methyl iodide, and thiophene-2-carbonyl chloride. From these reactions, full or partially substituted compounds were obtained, usually in high yields. Pure or defined products could not be obtained from reaction of 3 with methacryloyl chloride and O-acetylsalicyloyl chloride. The structures of the compounds were determined by elemental analysis, and IR, ¹H, ¹³C, and ³¹P NMR spectroscopy. The synthesized compounds were screened for in-vitro antimicrobial activity against two Gram-positive bacteria (Staphylococcus aureus and Enterococcus faecalis), two gram-negative bacteria (Escherichia coli and Klebsiella pneumonia), and fungal strains (Aspergillus niger, and Candida albicans) by the agar well diffusion method. Few compounds had significant activity against both Gram-positive and Gram-negative bacteria. None of the compounds had antifungal activity except compounds 7 and 9, which had moderate activity.     

Development of a Diamond Nanoparticles-based Nanosensor for Detection and Determination of Antiviral Drug Favipiravir

This study developed a nanosensor for the detection and determination of favipiravir, a presumed drug that has potential therapeutic efficacy in treating COVID-19 patients, from tablets and serum samples. This nanosensor was obtained by adding the optimum amount of diamond nanoparticles into carbon paste. For the determination of favipiravir adsorptive stripping differential pulse (AdSDPV) and adsorptive stripping square wave voltammetry (AdSSWV) were used. Limit of detection values were found as 4.83×10⁻⁹ M and 2.44×10⁻⁷ M for bulk and 5.18×10⁻⁸ M and 4.38×10⁻⁸ M for serum samples using AdSDPV and AdSSWV, respectively. Recovery studies made of the tablet and serum produced satisfactory results.     

Parametric optimization of heat transfer characteristics for helical coils

Journal of Thermal Analysis and Calorimetry - In this study, helically coiled tubes are used in a shell, and the effects of tube diameter, coil diameter, Reynolds number, Dean number and flow rate...