The bis-phenyltin-substituted, lone-pair-containing tungstoarsenate [(C(6)h(5)Sn)(2)as(2)W(19)O(67)(H(2)O)](8)(-)

The bis-phenyltin-substituted, lone-pair-containing tungstoarsenate [(C(6)H(5)Sn)(2)As(2)W(19)O(67)(H(2)O)](8)(-) (1) has been synthesized and characterized by multinuclear NMR, IR, and elemental analysis. Single-crystal X-ray analysis was carried out on (NH(4))(7)Na[(C(6)H(5)Sn)(2)As(2)W(19)O(67)(H(2)O)].17.5H(2)O (NH(4)(-1), which crystallizes in the monoclinic system, space group P2(1)/c, with a = 18.3127(17) A, b = 24.403(2) A, c = 22.965(2) A, beta = 106.223(2) degrees, and Z = 4. Polyanion 1 consists of two B-alpha-(As(III)W(9)O(33)) Keggin moieties linked via a WO(H(2)O) fragment and two SnC(6)H(5) groups leading to a sandwich-type structure with nominal C(2)(v) symmetry. Polyanion 1 is stable in solution as indicated by the expected 6-line pattern (4:4:4:4:2:1) in (183)W NMR and the expected (119)Sn, (13)C, and (1)H NMR spectra. Synthesis of 1 was accomplished by reaction of C(6)H(5)SnCl(3) and K(14)[As(2)W(19)O(67)(H(2)O)] in a 2:1 molar ratio in aqueous acidic medium (pH 2). In the solid-state structure of NH(4)(-1, neighboring polyanions are weakly bound via W-O-Na bonds leading to chains which interact with each other via the phenyl rings resulting in a 2-D assembly.     

Interaction of nickel with 4-(2'-benzothiazolylazo) salicylic acid (BTAS) and simultaneous first-derivative spectrophotometric determination of nickel(II) and iron(III)

The solution properties of nickel complex with 4-(2'-benzo-thiazolylazo) salicylic acid (BTAS) have been studied by zero-order absorption spectrophotometry in 40% (v/v) ethanol at 20 degrees C and an ionic strength of 0.1 mol dm(-3) (KNO(3)). The equilibria that exist in solution were established and the basic characteristics of complexes formed were determined. A new direct spectrophotometric method for the determination of trace amounts of the nickel is proposed based on the formation of the Ni (BTAS) complex at pH 7.0. The absorption maximum, molar absorbtivity, and Sandell's sensitivity of 1:1 (M:L) complex are 525 nm, 0.6 x 10(4) l mol(-1) cm(-1) and 2.824 x 10(-9) microg cm(-2), respectively. The use of first-derivative spectrophotometry eliminates the interference of iron and enables the simultaneous determination of nickel and iron using BTAS. Quantitative determination of Ni(II) and Fe(III) is possible in the range (0.59-7.08) and (2.1-8.4) microg ml(-1), respectively with a relative standard deviation of 0.5%. The proposed method has been successfully applied to the simultaneous spectrophotometric determination of nickel and iron in steel alloys and aluminum alloys.     

The synthesis and ligand properties of the dihydro-bis-(1-indazolyl)borate anion

Summary Potassium dihydro-bis-(1-indazolyl)borate, synthesized from potassium borohydride and indazole, has been used as a reagent to yield complexes with copper(II), nickel(II), cobalt(II), manganese(II) and iron(III) ions. From i.r. spectral studies the ligand is uninegative and bidentate and coordination occurs through the nitrogen atom at position 2 of the indazole ring system in all cases. With the sole exception of the copper(II) complex, the nitrogen atom at position 1 is also involved in forming a bridge with an adjacent metal ion. On the basis of electronic spectral studies and magnetic susceptibility measurements a distorted square planar structure involving chlorine bridges has been proposed for the copper complex. An octahedral geometry with ligand bridges for all complexes is tentatively proposed and it appears that all are polymers.     

Synthesis of oxadiazoles, thiadiazoles and triazoles derived from benzo[b]thiophene

In this work 3-chloro-2-chlorocarbonylbenzo[b]thiophene (1) was prepared from cinnamic acid and then converted into the acid hydrazide 2. The azomethines 3a-e were prepared from the corresponding aryl aldehydes and the acid hydrazide 2. Treatment of compound 2 with formic acid gave the N-formyl acid hydrazide 4, which upon refluxing with phosphorous pentoxide or phosphorous pentasulphide in xylene yielded the corresponding 2- (3-chloro-1-benzothien-2-yl)-1,3,4-oxadiazole (5) and 2-(3-chloro-1-benzo-thien-2-yl)-1,3,4- thiadiazole (6). Reaction of 1-thiosemicarbazide 7 with NaOH leads to ring closure giving 5- (3-chloro-1-benzothien-2- yl)-4H-triazole-3-thiol (8) which is converted into a number of derivatives 9-12 Reaction of 2 with phenyl isothiocyanate and NaOH afforded 5-(3-chloro- 1-benzothien-2-yl)-4-(phenyl)-4H-1,2,4-triazole-3-thiol (14).     

Synthesis and spectral studies of novel copper(II) chelates of sulphur-containing oximes

Summary Copper complexes of benzil--monoxime-2-iminoethanethiol (BMETH₂), benzil--monoxime-2-iminobenzenethiol (BMBTH₂), benzil--monoximethiosemicarbazone (BMTH₂) and benzil--monoximesemicarbazone (BMSH₂) were synthesized and characterized by physicochemical and spectroscopic measurements. The molar conductivities show that all of the complexes are nonelectrolytes. The i.r. spectra suggest that the ligands are tetradentate in all cases, whilst the electronic spectra suggest planar geometries for all the complexes. The calculated e.s.r. parameters show an axial dx ² - y ² ground state and suggest coordination through sulphur, in agreement with the i.r. results. In all of these complexes, the =N—;O group acts as a bridging function to give dimeric structures.     

Direct spectrophotometric method for the determination of cobalt with indane 1,2,3-trionetrioxime in aqueous medium

A simple, sensitive and selective Spectrophotometric method has been developed for the determination of cobalt using indane 1,2,3-trionetrioxime (ITT): The method is based on the colour reaction between ITT and cobalt(II) in sodium acetate-acetic acid buffer (pH 4.5–7.5) medium. The calibration graph for measurement at 320 nm is linear in the range 1.18–23.60g of cobalt per 25 ml, with molar absorptivity of 5.32×10⁴1mol^–1 cm^–1. The effect of interfering ions has been studied and the method was applied to the determination of cobalt in alloys, with good results.     

Barbier coupling in water: SnCl2-mediated and Co(acac)2-catalyzed allylation of carbonyls

Co(acac)₂·2H₂O efficiently catalyzes SnCl₂-mediated Barbier coupling in water between carbonyls, including aromatic, aliphatic and α,β-unsaturated aldehydes, ketones, sugars and allyl bromide to afford the corresponding homoallylic alcohols in high yields. The catalyst was reused for several cycles with consistent activity.     

Langmuir-Blodgett films of 9-phenyl anthracene molecules incorporated into different matrices

This communication reports the surface pressure (pi) versus area per molecule (A) isotherm characteristics of the mixed films of 9-phenyl anthracene (PA) in stearic acid (SA) and polymethyl methacrylate (PMMA) matrices, at the air-water interface. The mixed Langmuir films at the air-water interface have been observed to be easily transferred onto solid substrates to form uniform Langmuir-Blodgett films. By changing various parameters, namely molefraction, surface pressure of lifting and number of layers, the mixed Langmuir-Blodgett (LB) films of various types have been fabricated successfully and their spectroscopic characteristics have been reported. From the isotherm characteristics and the area per molecule versus molefraction plot, it is evident that the PA molecules are successfully incorporated into mixed Langmuir-Blodgett films. UV-vis absorption spectroscopic study of the mixed LB films at various molefractions of PA in two different matrices reveal that formation of I-type aggregate in PMMA matrix whereas both I- and H-type aggregates are playing their dominant role in SA matrix. Moreover, fluorescence spectroscopic study reveals reabsorption effect. Molecular movement persists in the freshly prepared LB films, as is evident from the time dependent changes in both UV-vis absorption and fluorescence spectra of the mixed LB films in both matrices. From our observation it is evident that about 200 h is required to get the LB films in a stable condition. Dimers and higher order n-mers are formed at a higher surface pressure of 30 mNm(-1).     

All-optical 2R-regeneration and continuous wave to pulsed signal wavelength conversion based on fiber nonlinearity

In this paper, we propose a novel all-optical 2R (re-amplification and re-shaping) regenerator based on inducing nonlinear chirp over a continuous wave probe. The regenerator also performs continuous wave to pulsed wavelength conversion. The chirp is induced in a highly nonlinear fiber by the data modulated pulsed signal that is to be regenerated. Offset filtering is employed at the output of the highly nonlinear fiber to extract the frequencies generated as a result of chirping. The regenerator performance has been evaluated with the help of bit-error-rate plots and eye diagrams at different values of optical signal to noise ratios. Apart from re-shaping and re-amplification, inclusion of the regenerator results in better resilience to amplified spontaneous emission noise.