Role of microenvironment in the mixed Langmuir-Blodgett films

This paper reports the pi-A isotherms and spectroscopic characteristics of mixed Langmuir and Langmuir-Blodgett (LB) films of nonamphiphilic carbazole (CA) molecules mixed with polymethyl methacrylate (PMMA) and stearic acid (SA). pi-A isotherm studies of mixed monolayer as well as the remarkable change in collapse pressure of the mixed monolayer isotherms definitely show that CA is incorporated into PMMA and SA matrices. However, CA is stacked in the PMMA/SA chains and forms microcrystalline aggregates, as is evidenced from the scanning electron micrograph picture. The nature of these aggregated species in the mixed LB films has been revealed by UV-vis absorption and fluorescence spectroscopic studies. The presence of two different kinds of band systems in the fluorescence spectra of the mixed LB films have been observed. This may be due to the formation of low-dimensional aggregates in the mixed LB films. Intensity distribution of different band systems is highly sensitive to the microenvironment of two different matrices as well as also on the film thickness.     

Langmuir-Blodgett films of p-terphenyl in different matrices: evidence of dual excimer

Langmuir-Blodgett (LB) films at different mole fractions of p-terphenyl have been prepared using two different matrices, viz., stearic acid (SA) and polymethyl methacrylate (PMMA). Multilayered LB films have been formed by changing various LB parameters namely, mole fraction of mixing, changing the number of layers as well as also the different surface pressure of lifting. The spectroscopic characteristics of mixed LB films, solution and microcrystal have been compared using UV-vis absorption and steady state fluorescence spectroscopy. Change of planarity of TP molecules are occurred while going from solution to solid states/films. Fluorescence spectra of the mixed LB films reveal intense excimeric emission in the mixed LB films with D1 excimer peak at 397 nm and D2 excimer peak at 412 nm. Various LB parameters namely changing the number of layers as well as the different surface pressure of lifting played important roles in the formation of dual excimeric sites in the mixed LB films.     

Studies on the structure and miscibility of mixed Langmuir-Blodgett films of a double-armed dibenzo-18-crown-6 ether with stearic acid

Reported here is the study on the structure of Langmuir-Blodgett (LB) films of double-armed dibenzo-18-crown-6 contain biphenyl (DACE) which are newly synthesized and mixed with stearic acid (SA). In addition, the miscibility of the two compounds was also tested by the measurement of the surface pressure-area (pi-A) isotherms of DACE and DACE/SA with various proportions. It is noted that there is no phase segregation in the mixed monolayer film of DACE/SA. Upon calculation of the excess surface area, it is concluded that the SA molecule can enter into the crown ether ring, while an 18C6 ring can host a maximum of one SA molecule. The difference of spectroscopic properties of DACE in LB films and bulk solution has been investigated by ultraviolet-visible (UV-vis) and Fourier-transfer infrared (FTIR) measurements. Molecules of DACE exist in the mixed LB films as monomers in contrast to those in the concentrated solution as aggregates. The hydrocarbon chains in DACE and DACE/SA LB films are tilted to the normal of the substrate surface, but perpendicular to the dipole moment of CO. Both CO bonds in the phenyl ethers and carboxylic ester of DACE, and the long axes of phenyl rings are aligned nearly perpendicular to the substrate surface. Infrared spectra of mixed LB films of DACE/SA present further evidence that the SA molecules enter into the crown ether rings of DACE.     

Adsorption kinetics of a fluorescent dye in a long chain fatty acid matrix

This work reports the adsorption kinetics of a highly fluorescent laser dye rhodamine B (RhB) in a preformed stearic acid (SA) Langmuir monolayer. The reaction kinetics was studied by surface pressure-time (π-t) curve at constant area and in situ fluorescence imaging microscopy (FIM). Increase in surface pressure (at constant area) with time as well as increase in surface coverage of monolayer film at air-water interface provide direct evidence for the interaction. ATR-FTIR spectra also supported the interaction and consequent complexation in the complex films. UV-vis absorption and Fluorescence spectra of the complex Langmuir-Blodgett (LB) films confirm the presence of RhB molecules in the complex films transferred onto solid substrates. The outcome of this work clearly shows successful incorporation of RhB molecules into SA matrix without changing the photophysical characteristics of the dye, thus making the dye material as LB compatible.     

Formation of complex Langmuir and Langmuir-Blodgett films of water soluble rosebengal

This communication reports the formation of complex Langmuir monolayer at the air-water interface by charge transfer types of interaction with the water soluble N-cetyl N,N,N-trimethyl ammonium bromide (CTAB) molecules doped with rosebengal (RB), with the stearic acid (SA) molecules of a preformed SA Langmuir monolayer. The reaction kinetics of the formation of RB-CTAB-SA complex monolayer was monitored by observing the increase in surface pressure with time while the barrier was kept fixed. Completion of interaction kinetics was confirmed by FTIR study. This complex Langmuir films at the air-water interface was transferred onto solid substrates at a desired surface pressure to form multilayered Langmuir-Blodgett films. Spectroscopic characterizations reveal some molecular level interactions as well as formation of microcrystalline aggregates depending upon the molar ratios of CTAB and RB within the complex LB films. Presence of two types of species in the complex LB films was confirmed by fluorescence spectroscopy.     

Supramolecular architecture in Langmuir and Langmuir-Blodgett films incorporating a chiral azobenzene

This article describes the synthesis and fabrication of Langmuir and Langmuir-Blodgett (LB) films incorporating a chiral azobenzene derivative, namely, ( S)-4- sec-butyloxy-4'-[5'-(methyloxycarbonyl)pentyl-1'-oxy]azobenzene, abbreviated as AZO-C4(S). Appropriate conditions for the fabrication of monolayers of AZO-C4(S) at the air-water interface have been established, and the resulting Langmuir films have been characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and UV-vis reflection spectroscopy. The results indicate the formation of an ordered trilayer at the air-water interface with UV-vis reflection spectroscopy showing a new supramolecular architecture for multilayered films as well as the formation of J aggregates. Films were transferred onto solid substrates, with AFM revealing well-ordered multilayered films without 3D defects. Infrared and UV-vis absorption spectroscopy indicate that the supramolecular architecture may be favored by the formation of H bonds between acid groups in neighboring layers and pi-pi intermolecular interactions. Circular dichroism spectra reveal chiro-optical activity in multilayered LB films.     

Langmuir-Blodgett film of hydrophobin protein from Pleurotus ostreatus at the air-water interface

We present results concerning the formation of Langmuir-Blodgett (LB) films of a class I hydrophobin from Pleurotus ostreatus at the air-water interface, and their structure as Langmuir-Blodgett (LB) films when deposited on silicon substrates. LB films of the hydrophobin were investigated by atomic force microscopy (AFM). We observed that the compressed film at the air-water interface exhibits a molecular depletion even at low surface pressure. In order to estimate the surface molecular concentration, we fit the experimental isotherm with Volmer's equation describing the equation of state for molecular monolayers. We found that about (1)/ 10 of the molecules contribute to the surface film formation. When transferred on silicon substrates, compact and uniform monomolecular layers about 2.5 nm thick, comparable to a typical molecular size, were observed. The monolayers coexist with protein aggregates, under the typical rodlet form with a uniform thickness of about 5.0 nm. The observed rodlets appear to be a hydrophilic bilayer and can then be responsible for the surface molecular depletion.     

Interfacial behavior of poly(isoprene-b-methyl methacrylate) diblock copolymers and their blends with polystyrene at the air-water interface

The interfacial behavior of poly(isoprene-b-methyl methacrylate) diblock copolymers (PI-b-PMMA), with similar PMMA blocks but differing in the percentage of PI segments, SP19 (5% PI) and SP38 (52% PI), was studied at the air-water interface. The surface pressure-area (pi-A) isotherms, compression-expansion cycles, and relaxation curves were compared with those of the PMMA homopolymer. The short hydrophobic PI block of SP19 does not contribute to the mean molecular area at low surface pressures and yet has a negative contribution (condensing effect) when the surface pressure increases. On the contrary, the long PI block of SP38 contributes considerably to the surface area from low to high surface pressures. The A-t relaxation curves compare well with those of PMMA at low surface pressures (pi = 2 mN.m-1), but not at intermediate and high pressures (pi = 10, 30 mN.m-1), where a clear dependence on the length of the PI block was observed. The quantitative analysis of the relaxation curves at high pressures shows both a fast and slow component, attributed mostly to the local and middle-to-long-range reorganization of PMMA chains, respectively. PI-b-PMMA diblocks and PMMA were further blended with PS. The PS and PMMA are immiscible at the air-water interface. The addition of PS does not change the pi-A isotherm of PMMA, but the copolymers blended with PS form films that are more condensed at low pressures. The Langmuir-Blodgett (LB) films transferred onto mica substrates were analyzed by atomic force microscopy (AFM). The LB films of single diblocks are uniform, while those of PI-b-PMMA and PMMA blended with PS show aggregates with variable patterns.     

Synthesis and supramolecular self-assembly study of a novel porphyrin molecule in Langmuir and Langmuir-Blodgett films

The self-assembly and supramolecular engineering of porphyrins into ordered arrays have recently attracted much interest because of their promising application potential in molecular and electronic devices, spintronics, energy harvesting and storage, catalysis, and sensor development. We herein report the synthesis and supramolecular self-assembly study of a novel porphyrin molecule, 2Por-TAZ, in Langmuir and Langmuir-Blodgett films. The 2Por-TAZ molecule contains two porphyrin macrocycles attached to a triaminotriazine headgroup. Triaminotriazines are known to form a highly ordered linear supramolecular self-assembly through complementary hydrogen bonding with barbituric acid molecules at the air-water interface. Surface pressure-area isotherm measurements and polarized UV-vis absorption spectroscopic studies indicate that the 2Por-TAZ molecules adopted an edge-on orientation at the air-water interface. Polarized UV-vis absorption study also revealed that the 2Por-TAZ molecules formed linear supramolecular networks on pure water and barbituric acid subphase with porphyrin flat planes facing toward the compression direction. The binding of barbituric acid with 2Por-TAZ molecules was observed from the expansion of the Langmuir monolayer film. Compared to the transferred LB film from pure water subphase, both the UV-vis absorbance and fluorescence emission intensity of the LB film transferred from barbituric acid subphase increased significantly.     

Fabrication, structural characterization, and applications of langmuir and langmuir-blodgett films of a poly(azo)urethane

The synthesis of a poly(azo)urethane by fixing CO(2) in bis-epoxide followed by a polymerization reaction with an azodiamine is presented. Since isocyanate is not used in the process, it is termed "clean method" and the polymers obtained are named "NIPUs" (non-isocyanate polyurethanes). Langmuir films were formed at the air-water interface and were characterized by surface pressure vs mean molecular area per mer unit (Pi-A) isotherms. The Langmuir monolayers were further studied by running stability tests and cycles of compression/expansion (possible hysteresis) and by varying the compression speed of the monolayer formation, the subphase temperature, and the solvents used to prepare the spreading polymer solutions. The Langmuir-Blodgett (LB) technique was used to fabricate ultrathin films of a particular polymer (PAzoU). It is possible to grow homogeneous LB films of up to 15 layers as monitored using UV-vis absorption spectroscopy. Higher number of layers can be deposited when PAzoU is mixed with stearic acid, producing mixed LB films. Fourier transform infrared (FTIR) absorption spectroscopy and Raman scattering showed that the materials do not interact chemically in the mixed LB films. The atomic force microscopy (AFM) and micro-Raman technique (optical microscopy coupled to Raman spectrograph) revealed that mixed LB films present a phase separation distinguishable at micrometer or nanometer scale. Finally, mixed and neat LB films were successfully characterized using impedance spectroscopy at different temperatures, a property that may lead to future application as temperature sensors. Principal component analysis (PCA) was used to correlate the data.     

Formation of complex films with water-soluble CTAB molecules

This communication reports the formation of complex Langmuir monolayer at the air-water interface with the water-soluble N-cetyl N,N,N-trimethyl ammonium bromide (CTAB) molecules when interacted with the stearic acid (SA) molecules. The reaction kinetics of the formation of the CTAB-SA complex was monitored by observing the surface pressure versus time graph. Multilayered LB films of this complex doped with Congo red was successfully formed onto a quartz substrate. UV-Vis absorption and steady-state fluorescence spectroscopic characteristics of this doped LB films confirms the successful incorporation of Congo red molecules in to the CTAB-SA complex films.     

双长链烷基稀土杂多酸化合物LB膜的制备、结构及性质研究

制备了三种新型双窗长链烷基稀土杂多酸化合物langmuir和langmuir-blodgett膜：DODA/Ln(PW~1~1)~2(Ln=La,Sm,Eu)。用π-A等温线,IR,UV,小角X射线衍射,荧光光谱,光电压谱对其进行了表征。结果表明：它们在空气-水界面有良好的成膜性能,这些单层在表面压为零时,表观单分子占有面积为0.45～0.50nm^2。LB膜有良好的层间有序性,稀土杂多酸阴离子是作为一无机层夹在两个双长链烷基层之间。DODA/Ln(PW)~1~1)~2LB膜具有Sm,Eu的特征荧光,其光电压谱亦有较强的光电响应。     

Molecular organization in two-dimensional films of liquid II. Langmuir and Langmuir-Blodgett films of a perylene-like dye mixed with liquid crystals having a terminal cyano group crystalline mixtures

Langmuir and Langmuir-Blodgett (LB) films of a perylene-like compound and its binary mixtures with 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4"-cyano-p-terphenyl (5CT) have been studied. On the basis of the surface pressure-area isotherms, the molecular organization on the air-water interface has been estimated. Information about the miscibility or the phase separation of components in the binary mixtures has been obtained. The spectroscopic study of the LB films has allowed conclusions to be drawn about the arrangement of the molecules on the quartz slides. The fluorescence spectra of the LB films of the perylene-like compound have revealed the formation of self-aggregates.     

一种含苯并菲侧基的“毛-棒”状梯形聚倍半硅氧烷LB膜研究(英文)

一种新的含烷基取代的苯并菲侧基的"毛-棒"状(hairy-rod)梯形聚倍半硅氧烷(LPSQ)可以在空气-水界面形成稳定的单分子层,研究了温度、铺展溶剂和浓度对π-A等温曲线的影响.在适当的表面压下,以甲苯为铺展溶剂该单分子层可以被成功地转移至疏水的硅片或石英片上形成均一稳定的Y-型LB膜,其紫外吸收强度在几个月内均保持不变,说明该LB膜具有良好的稳定性,AFM图像表明其形成了均一致密的膜.通过偏振紫外光谱和荧光光谱研究了其面内各向异性,发现LPSQ的分子链采取了平行于拉膜方向的优先取向,最优取向因子S为0.42.     

Photopolymerization of mixed monolayers and black lipid membranes containing gramicidin A and diacetylenic phospholipids

We formed monolayers and black lipid membranes (BLMs) of photopolymerizable lipids mixed with the channel-forming protein gramicidin A to evaluate their miscibility and the potential for improved stability of the BLM scaffold through polymerization. Analyses of surface pressure vs area isotherms indicated that gramicidin A dispersed with three different synthetic, polymerizable, diacetylene-containing phospholipids, 1,2-di-10,12-tricosadiynoyl-sn-glycero-3-phosphocholine (DTPC), 1,2-di-10,12-tricosadiynoyl-sn-glycero-3-phosphoethanolamine (DTPE), and 1-palmitoyl-2,10,12-tricosadiynoyl-sn-glycero-3-phosphoethanolamine (PTPE) to form mixed monolayers at the air-water interface on a Langmuir-Blodgett (LB) trough. Conductance measurements across a diacetylenic lipid-containing BLM confirmed dispersion of the gramicidin channel with the lipid layer and demonstrated gramicidin ion-channel activity before and after UV exposure. Polymerization kinetics of the diacetylenic films were monitored by film pressure changes at constant LB trough area and by UV-vis absorption spectroscopy of polymerized monolayers deposited onto quartz. An initial increase in film pressure of both the pure diacetylene lipid monolayers and mixed films upon exposure to UV light indicated a change in the film structure. Over the time scale of the pressure increase, an absorbance peak indicative of polymerization evolved, suggesting that the structural change in the lipid monolayer was due to polymerization. Film pressure and absorbance kinetics also revealed degradation of the polymerized chains at long exposure times, indicating an optimum time of UV irradiation for maximized polymerization in the lipid layer. Accordingly, exposure of polymerizable lipid-containing black lipid membranes to short increments of UV light led to an increase in the bilayer lifetime.     

Structural control in thin layers of poly(p-phenyleneethynylene)s: photophysical studies of Langmuir and Langmuir-Blodgett films

We present the relationship between the spatial arrangement and the photophysical properties of fluorescent polymers in thin films with controlled structures. Eight surfactant poly(p-phenyleneethynylene)s were designed and studied. These detailed studies of the behavior of the polymers at the air-water interface, and of the photophysical properties of their transferred LB films, revealed key structure-property relationships. Some of the polymers displayed pi-aggregates that are characteristic of an edge-on structure at the air-water interface. Monolayer LB films of these polymers showed greatly reduced quantum yields relative to solution values. Other polymers exhibited a highly emissive face-on structure at the air-water interface, and did not form pi-aggregates. The combination of pressure-area isotherms and the surface pressure dependent in situ UV-vis spectra of the polymers at the air-water interface revealed different behavioral details. In addition, the UV-vis spectra, fluorescence spectra, and quantum yields of the LB films provide design principles for making highly emissive films.     

Using phospholipid Langmuir and Langmuir-Blodgett films as matrix for urease immobilization

The immobilization of enzymes in organized two-dimensional matrices is a key requirement for many biotechnological applications. In this paper, we used the Langmuir-Blodgett (LB) technique to obtain controlled architectures of urease immobilized in solid supports, whose physicochemical properties were investigated in detail. Urease molecules were adsorbed at the air-water interface and incorporated into Langmuir monolayers of the phospholipid dipalmitoyl phosphatidyl glycerol (DPPG). Incorporation of urease made DPPG monolayers more flexible and caused the reduction of the equilibrium and dynamic elasticity of the film. Urease and DPPG-urease mixed monolayers could be transferred onto solid substrates, forming LB films. A close packing arrangement of urease was obtained, especially in the mixed LB films, which was inferred with nanogravimetry and electrochemistry measurements. From the blocking effect of the LB films deposited onto indium tin oxide (ITO) substrates, the electrochemical properties of the LB films pointed to a charge transport controlled by the lipid architecture.     

Molecular organization in two-dimensional films of liquid II. Langmuir and Langmuir-Blodgett films of a perylene-like dye mixed with liquid crystals having a terminal cyano group crystalline mixtures

Langmuir and Langmuir-Blodgett (LB) films of a perylene-like compound and its binary mixtures with 4-octyl-4'-cyanobiphenyl (8CB) and 4-pentyl-4"-cyano-p-terphenyl (5CT) have been studied. On the basis of the surface pressure-area isotherms, the molecular organization on the air-water interface has been estimated. Information about the miscibility or the phase separation of components in the binary mixtures has been obtained. The spectroscopic study of the LB films has allowed conclusions to be drawn about the arrangement of the molecules on the quartz slides. The fluorescence spectra of the LB films of the perylene-like compound have revealed the formation of self-aggregates.     

Surface chemistry studies of (CdSe)ZnS quantum dots at the air-water interface

Trioctylphosphine oxide- (TOPO-) capped (CdSe)ZnS quantum dots (QDs) were prepared through a stepwise synthesis. The surface chemistry behavior of the QDs at the air-water interface was carefully examined by various physical measurements. The surface pressure-area isotherm of the Langmuir film of the QDs gave an average diameter of 4.4 nm, which matched very well with the value determined by transmission electron microscopy (TEM) measurements if the thickness of the TOPO cap was counted. The stability of the Langmuir film of the QDs was tested by two different methods, compression/decompression cycling and kinetic measurements, both of which indicated that TOPO-capped (CdSe)ZnS QDs can form stable Langmuir films at the air-water interface. Epifluorescence microscopy revealed the two-dimensional aggregation of the QDs in Langmuir films during the early stage of the compression process. However, at high surface pressures, the Langmuir film of QDs was more homogeneous and was capable of being deposited on a hydrophobic quartz slide by the Langmuir-Blodgett (LB) film technique. Photoluminescence (PL) spectroscopy was utilized to characterize the LB films. The PL intensity of the LB film of QDs at the first emission maximum was found to increase linearly with increasing number of layers deposited onto the hydrophobic quartz slide, which implied a homogeneous deposition of the Langmuir film of QDs at surface pressures greater than 20 mN.m(-1).     

Pure and mixed films of a nitrostilbene derivative at the air-water interface, Langmuir-Blodgett multilayer fabrication, and optical characterization

This paper reports the preparation and characterization of pure Langmuir and Langmuir-Blodgett (LB) films of a stilbene derivative containing two alkyl chains, namely 4-dioctadecylamino-4'-nitrostilbene. Mixed films incorporating docosanoic acid and the stilbene derivative are also studied. Brewster angle microscopy (BAM) analysis has revealed the existence of randomly oriented three-dimensional (3D) aggregates, spontaneously formed immediately after the spreading process of the stilbene derivative onto the water surface. These 3D aggregates coexist with a Langmuir film that shows the typical gas, liquid, and solid-like phases in the surface pressure and surface potential vs area per molecule isotherms, indicative of an average preferential orientation of the stilbene compound at the air-water interface, and a gradual molecular arrangement into a defined structure upon compression. A blue shift of 55 nm of the reflection spectrum of the Langmuir film with respect to the spectrum of a chloroform solution of the nitrostilbene indicates that two-dimensional (2D) H-aggregates are formed at the air-water interface. The monolayers are transferred undisturbed onto solid substrates with atomic force microscopy (AFM) revealing that the one layer LB films are constituted by a monolayer of the stilbene derivative together with some 3D aggregates. When the nitrostilbene compound is blended with docosanoic acid, the 3D aggregation is avoided in the Langmuir and Langmuir-Blodgett films, but does not limit the formation of 2D H-aggregates, desirable for second-order nonlinear optical response in the blue domain. The AFM images of the mixed LB films show that they are formed by a docosanoic acid monolayer and, on the top of it, a bilayer of the stilbene derivative.