Reconfigurable dynamic all-optical chaotic logic operations in an optically injected VCSEL

In a chaotic system of vertical cavity surface emitting laser(VCSEL) with external optical-injection, we propose a novel implementation scheme for reconfigurable dynamic all-optical chaotic logic operations(AOCLOs). Under different key parameters, such as the bias current, the injection strength and the frequency detuning of the injected light field and the VCSEL, we also explore the evolutions of the polarization-bistability with the amplitude of the injected light field when the output of VCSEL is chaotic wave. According to the dynamic evolutions, we find out the optimal value of the frequency detuning that is considered as a control logic signal, and further implement different AOCLOs, such as AND, NAND, OR,NOR, XOR, and XNOR, by controlling the logic operation of the control logic signal between two logic inputs. Moreover,the ability to reconstruct these logic operations is demonstrated under relatively low noise strength of the spontaneous emission.     

Analysis of multiple scattering from two-dimensional dielectric sea surface with iterative Kirchhoff approximation

<正>An iterative method in the Kirchhoff approximation is proposed for high frequency multiple electromagnetic scattering from two-dimensional dielectric sea surface.The multiple interaction of the scattering field is characterized with the corrected electromagnetic currents of the wind-driven sea surface.The actual surface currents are approximated with the iterative solution of the corrected currents.A newly developed sea spectrum,Elfouhaily spectrum,is utilized to build the sea surface model.The shadowing correction is improved by the Depth-Buffer algorithm.The validity of the iterative Kirchhoff approximation is verified by the agreement of backscattering coefficients with the measured data.     

基于SPR原理的葡萄糖浓度折射率特性矩阵测量（英文）

设计了一种简洁的角度扫描棱镜SPR传感系统,反射式平行光路设计简化了系统结构。其主要包括光源及光强感知、平行光路结构、电机与温度控制模块构成。通过单电机扫描入射角与温度控制,实现了对葡萄糖的折射率浓度特性有效测量。理论分析存在交叉灵敏度矩阵可同时度量温度及葡萄糖质量浓度共振角度的变化规律,且实验得其灵敏矩阵。为区分温度和质量浓度对共振角度的影响以及校正SPR温度漂移提供参考。     

基于AFORS-HET的单层MoS2(n)/a-Si(i)/c-Si(p)/μc-Si(p+)异质结太阳能电池模拟

设计了单层MoS2 (n)/a-Si(i)/c-Si(p)/μc-Si(p+)异质结太阳能电池结构,采用AFORS-HET模拟软件模拟了背场层的带隙、掺杂浓度和缺陷密度等参数对开路电压、短路电流、填充因子和转化效率的影响.结果 显示,背场层带隙在1.5 ～1.7 eV之间,背场层的掺杂浓度大于1×1018 cm-3时,该结构的太阳能电池有比较稳定的表现.缺陷密度增加时,太阳能电池效率随着缺陷密度的对数线性减小,当控制缺陷密度在1011 cm-3以下时,可以获得大于24.10;的转化效率,缺陷密度为109 cm-3时,可以获得最高29.08;的转换效率.最后研究了背场层对该结构太阳能电池的作用,结果显示有效控制缺陷密度时,背场层的添加对电池效率的提升很明显.     

复合射孔爆燃气体压裂裂缝起裂扩展研究

结合线弹性断裂力学的裂缝尖端应力强度因子判据,建立了复合射孔爆燃气体压裂裂缝的起裂扩展模型,通过建立与多个变量相关的缝内气体压力分布函数,利用迭代法实现了模型的数值求解,获得了缝内气体压力分布随时间的动态变化规律,并分析了不同特征参数对裂缝起裂扩展与止裂过程的影响。实例计算结果表明:(1)随着裂缝扩展的进行,爆燃气体流动尖端与裂缝尖端经历了由重合到不重合再到重合的过程;(2)地应力越大,裂缝起裂扩展越困难,爆燃气体有效致裂作用时间越短,最终得到的裂缝扩展长度也越小;(3)初始裂缝越长,裂缝更容易起裂扩展,爆燃气体能量利用率越高,裂缝扩展更长;(4)岩石断裂韧性的改变对裂缝起裂、止裂和裂缝扩展长度没有明显的影响;(5)升压速率越小,爆燃气体有效致裂作用时间越长,最终裂缝扩展也更长,但对裂缝起裂压力与止裂压力几乎没有影响。     

黑索金的非弹性中子散射及第一性原理计算

黑索金(环三亚甲基三硝胺, RDX, C₃H₆O₆N₆)是一种非常重要的次级炸药, 因其高能量密度及对外界刺激的低感度而具有广泛的军事和工业应用. 为了能在生产、运输、存储以及使用中对其行为进行有效控制, 人们对它的化学性质、力学性质, 尤其是起爆进行了大量的研究. 炸药的起爆是一个非常复杂的过程, 其中最主要的问题之一就是能量是如何从连续介质尺度的刺激转移到原子尺度引起吸热分解的. 根据冲击波致爆的非平衡态Zel'dovich-von Neumann-Doering模型, 声子作为最初的热载体在整个过程中起着非常重要的作用. 实验上, 非弹性中子散射技术是研究晶体中原子和分子运动动力学的有力手段, 尤其是对于包含了大部分声子晶格模式的低频区域来说极具优势. 利用非弹性中子散射技术测得了RDX 在10–104 cm^-1 范围内的振动谱, 结合固态量子化学计算, 对所测的12个振动模式进行指认. 研究结果有助于人们对起爆详细机理的认识.     

Method of Fundamental Solution for Composite Electromagnetic Scattering from Two-Dimensional Object Located on a Rough Surface

Numerical modeling on the composite electromagnetic （EM） scattering from a two-dimensional （2-D） object located on a rough surface is presented by using the efficient method of fundamental solution （MFS）. The proposed special choice of the MFS is an interesting alternative to the onerous mesh generation in the traditional numerical methods, particularly for the method of moment （MoM）. There is no mesh scheme and singularity analysis, the field to be solved can be obtained directly in terms of the fundamental solutions of the appropriate wave equations. The numerical results are obtained and compared with the traditional MoM results, to demonstrate the accuracy and effectiveness of this technique.     

NH4F对化学镀镍液的作用机理及镀层性能的影响

氟元素是周期表中最活泼的非金属元素,有着最强的电负性,氟化物有着特殊的化学性能。关于氟化物在化学镀镍磷工艺中的应用已有报道,在镁基体上化学镀的前处理过程中,常用氢氟酸或氟化氢铵来进行活化处理;硅片表面上的化学镀也通常用HF与HNO3或HCl的混酸来活化,使硅片表面产生Si-H键。另外,如果在化学镀液中添加少量的氟化钠,则起到加速的作用[1]。对于氟化物在化学镀镍磷工艺中的报道仅限于此,未见有关氟化物在化学镀中其它作用的研究。鉴于此,本工作以氟化铵为研究对象,对其在弱碱性的条件下对化学镀液的缓冲能力、沉积速度以及所得镀层性能的影响进行了研究。     

Controllable all-optical stochastic logic gates and their delay storages based on the cascaded VCSELs with optical-injection

Using the dynamical properties of the polarization bistability that depends on the detuning of the injected light,we propose a novel approach to implement reliable all-optical stochastic logic gates in the cascaded vertical cavity surface emitting lasers(VCSELs) with optical-injection.Here,two logic inputs are encoded in the detuning of the injected light from a tunable CW laser.The logic outputs are decoded from the two orthogonal polarization lights emitted from the optically injected VCSELs.For the same logic inputs,under electro-optic modulation,we perform various digital signal processing(NOT,AND,NAND,XOR,XNOR,OR,NOR) in the all-optical domain by controlling the logic operation of the applied electric field.Also we explore their delay storages by using the mechanism of the generalized chaotic synchronization.To quantify the reliabilities of these logic gates,we further demonstrate their success probabilities.     

α,β-不饱和醛在Ni-Pt(111)面上吸附的理论研究

利用密度泛函理论研究了巴豆醛和肉桂醛分子在Pt-Ni-Pt(111)面的吸附构型以及相关电子性质. 吸附构型与吸附能结果表明, 巴豆醛和肉桂醛在覆盖度为1/25 ML的条件下, 以C=C和C=O双键协同吸附在Pt-Ni-Pt(111)面较为稳定, 且肉桂醛与Pt-Ni-Pt(111)面的吸附能远大于巴豆醛. 由Mulliken电荷布局和差分电荷密度可知, 在吸附过程中肉桂醛分子向Pt-Ni-Pt(111)面上转移的电荷数较巴豆醛更多, 相互作用更大. 由电子态密度分析结果可知, 不饱和醛与Pt-Ni-Pt(111)面的吸附作用主要是由于分子的p轨道电子与催化剂d轨道电子之间的相互作用. 由于苯基的存在使肉桂醛分子在Pt-Ni-Pt(111)面上的吸附更强, 且平行于催化剂表面.